Repairs to Snow Cat 7th (PREET-90 HP) of snow Clearance Control Room Kulgam/Bathipora.

Amount

Repairs to Snow Cat 7th (PREET-90 HP) of snow Clearance Control Room Kulgam/Bathipora.

The job includes lifting of cabin with the help of chain-pulley block along with dismantling all the blade attachments. The job further includes disassembling the fuel tank by using oxy-acetylene gas cutter and also disassembling the dash board , Steering linkages along with all the damaged wiring network inside it. Mechanical Side: a.) Removing all the pipe linkages includes hydraulic hoses, fuel pipes etc along with any external components connected to gear box such as PTO shaft, linkages or hydraulic connections. b.) Disconnecting gearbox from the engine by disconnecting clutch shaft, clutch assy. and from chassis by unbolting the mounting points and removing the bolts and cover to open gearbox casing and washing the inside gears,shafts thoroughly with HSD and assess any damage to gears, shafts , bearings and other components along with draining the gear oil. (Note:- In preet tractors the whole tractor is disassembled for opening the gear box which is very tideous, highly skilled and labour extensive job ) c.) Removing and replacing (2no.) primary shaft's (Part no: 147593) damaged bearing (Part no: 025809 ) and adding weld for machining along with turning of shaft on lathe machine for fittment of new bearings. d.) Reassembling the gear box by reinstalling all the gears, shafts and synchronizers and refilling the gear box with gear oil and greasing a part wherever necessary along with testing gear engaging manually before sealing the gearbox and reassembling the gear box back to chassis. Electrical Side: The job includes removing all the damaged/short circuited Harness wire network and replacing with new wiring of superior quality along with sockets as per sample and specifications. The job concludes with reinstalling steering linkages, gear box, PTO with allied parts and lowering down and re-assembling of cabin by rebolting all the unbolted points and also reinstalling all the harness wire network. Note: a.) the job which includes cost of highly skilled labour, all tools and tackles and their carriage to the work site has to be provided by the firm.

Providing and fitting of brake shoes. The job includes removing the worn brake shoes and fitting the new brake shoes

Repairs to the self starter of the machine by way of replacing worn out bushes/ brushes, bearing, drive pinion ,soleniod and clutch.

Providing, fabrication and fitting of high pressure hydraulic hoses of required diameter, size and length of required collars as per sample. The job includes cutting of hydraulic hose to the required size and fitting of collars and nipples as per sample.

Providing of HSD for washing and testing

Providing of Dhoti Cloth

P/F of 32mm Nut bolt for frame

Providing of Shellac Tube

G R MOTORS (BID ID -2324431)