COMPREHENSIVE MAINTENANCE AND PERIODICAL SERVICES OF CERTAIN MD ACCN AND OTM BLDGS OF AREA V OF AGE B/R WEST, UNDER GE (WEST) COLABA MUMBAI.

Amount

Dismantling of brick work or stone/boulder masonry built in cement mortar or cement lime mortar all as specified and directed.

M&L brickwork with sub class `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

M&L brickwork except bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 all as specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks, with 390x190x190mm size, exc. 10 cm in width type C1 (1:3:6) and setting in mortar 1:4 all as specified and directed

Taking down cement plaster of any description on brick or stone walls including raking out joints hacking for key, scrubbing down with water and removing debris outside MD land upto 04 storeys buildings all as specified and directed.

M&L for 15-20 mm average thick Ready Mix Plaster in multy layer of make / brand - ACC's Accoplast / CK Birla's Aerocon /mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, including use of scaffolding all as specified and directed. Note: Liquid water proofing compound will be measured and paid seperately as supply only.

M&L for 10 mm - 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished even & smooth witjhout using extra cement all as specified and as directed.

Supply only liquid water proofing compound.

M&L for preparing old/new plastered surfaces of external walls / ceilings by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including use of scaffoldings all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of Plastic emulsion paint over a coat of birla putty (average 2 mm thick) all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil based distemper over a coat of alkali resisting priming paint over 1 mm thick (average) Birla white putty all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) Birla wall care putty all as specified & directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceiling in CM (1:3) and finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisele & hammer after that cleaning of rust from mild steel rod applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface for 8-10mm thick ready mix plaster for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished surfaces even & smooth without using extra cement including applying three coats of white wash all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white washing including preparation of surfaces all as specified and directed.

M&L for preparation of old surfaces of walls and applying two coats of oil based distemper over a coat of birla putty (average 2 mm thick) all as specified and directed

M&L in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints in second class hardwood weather boarding , clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scaffoldings of any height all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm in widht or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Complete removal of old existing polish of doors/windows by using blow lamp or by grinder and applying french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler one or more coats of best quality all as specified and directed

S&F in repairs decorative beading of 1st class hardwood of any size use for fixing of glass panes of doors and windows all as specified and directed.

M&L anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified and directed.

Providing and injecting chemical emulsion using chloropyriphos 20 percent EC with 1 percent concentration for post constructional Anti-termite treatment for treatment of soil under existing floors using emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor all as specified and directed.

Providing and injecting chemical emulsion using chlorpyriphos 20 percent EC with 1 percent concentartion for post constructional Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) at the rate of 0.50 litre per hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same all as specified and directed.

M&L for injecting chemical GLYPHOSATE 41 percent solution 20 ml or till refusal by making cut/injection in the stem of plant 30mm center to center and spraying with solution (25 ml Glyphospate 41 percent diluted with one litre of water ) and removing the plants/vegetation with penetrated roots complete including all necessary scafolding arrangments upto any height all as specified and directed. Note:- The quoted rate deemed to include for inspection and surveying all the buildings in area regularly for preventing any additional growth of vegetation/ plants with above treatment to the entire satisfaction of Engineer-in-Charge.

S&F in repairs curtain rod (decorative type) 20 mm dia stainless steel all as specified and directed.

S&F curtain brackets decorative type (antique), for receiving single/double curtain rod fixing for 20 mm dia rod all as specified and directed.

S&F in repairs PVC floor trap 100 mm bore outlet including provision of jointing to waste pipes in run lead joints dia of outlet 75 mm (Run lead joint will not be measured & paid separately).

Demolition and breaking up drain pipes 100/110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar upto any height including all scafloding arrangments all as specified and directed

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls upto any height including all scafloding arrangments all as specified and directed.

S&F 110 mm bore PVC pipe stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stay to wall or roof all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples over wooden beading all as specified and directed.

S&F 110 mm bore bends (any radius), diminshing pieces or tapers (larger bore measured) all as specified and directed.

S&F in repairs aluminium hydraullic door closer, right hand and left hand opening doors double speed adjustable closing and latching speed, suitable for door shutter 851mm to 1000mm in width and 61 to 80kg in weight all as specified and directed.

S&F in repairs mild steel 300mm ordinary rat tail rod pattern spring including roller plateall as specified and directed.

M&L for Preparing old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coats of synthetic enamel painting all as specified and directed.

Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet/grid all as specified and directed.

M&L for GI frame work for seamless ceiling 600x600mm grid size comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre all as specified and directed.

M&L 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to aluminum frame work in ceiling and all other similar works all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engineer-in-Charge.

S&F Fibre glass reinforced translucent corrugated sheeting 10-12mm with two corrugations side lap fixed with coach screw and washer in roof, wall all as specified and directed.

Dismantling Mangalore patteren or similar tiles in roofing including portions bedded in cement mortar of any height including scafolding all as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height all as specified and directed.

Fixing only roof tiles, Mangalore Pattern, interlocking at side joints, laid dry including scaffoldings of any height all as specified and directed.

Dismantling roof battens of any description in any position all as specified and directed.

M&L second class hardwood clean sawn battens at 30cm c/c, sectional area exc 15 & n exc 25 Sqcm including scaffoldings of any height all as specified and directed.

Fixing only second class hardwood clean sawn battens at 30cm c/c, sectional area exc 15 & n exc 25 Sqcm including scafoldings of any height all as specified and directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sq.m in each pane including hacking out old broken glass panes from wooden frames all as specified and directed.

S&F in repairs plain, galvanised mild steel sheeting in valley gutters of thickness 0.63mm, straight flashing (length and girth as fixed ) all as specified and directed

S&F in repairs POP false ceiling consisting of frame work made with 50 Sqmm MS tube of 18 gauge thickness as main runner at 600 mm c/c both ways suspended/supported with MS flats 25x4 from existing RCC slab including providing and fixing expended metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium silicate semihydrate variety) to the expended metal of thickness not less than 10 mm finished smooth to line and level including necessary supports scaffolding etc as required and also including applying a coat of red oxide zinc chrome primer over the MS frame work and suspended all as specified and directed

M&L in repairs Italian marble pre polished (of any type and colour) 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including moulding of front and sides of edges laid in floors/Jambs of window and all other similar works in approved design over 20 mm thick screed bed/plaster in cement mortar 1:4 all as specified and directed.

S&F in repairs tile trim of Stainless steel 304 grade of thickness 1.50 - 2.0 mm of brass, 25mm width any colour as approved by GE all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick 2nd class hardwood planed one side & edges tongued and grooved or rebated and fixed with nails as in wall panelling all as specified and directed.

M&L for clean sawn timber framed and fixed second class hard wood scantlings as in frame work to wall panelling all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats all as specified and directed.

S&F joist, channel, angle, or tee sections, or MS Flats fixed independantly without connecting plates, etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume / CGI chajjas all as specified and directed.

S&F in repairs for cast iron arrow, tee, bends and designs of various pattern as per requirement of site for gates, rails, braces, etc. complete drilled for fixing of hooks and hinges or steel hanging door fittings also fastening, welding and fixing all as specified & directed.

S&F Aluminum tubular hallow section 25 x 25 mm not exc 900 mm c/c on exceeding columns/beam/ slab to hold cladding etc. and fixing Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.

M&L for machine cut, polished cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:6) all as specified and as directed.

M&L for granite (of any approved colour) 18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works, including moulding/rounding the edges of stone, laying over & including 15 mm thick cement mortar (1:6) all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm glossy finish all as specified and directed.

S&F in repair Stainless Steel Double Bowl Kitchen Sink made of stainless steel 1 mm thick 304 grade kitchen or laboratory with plugs, washers and waste pipe including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store,15 mm dia bore all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20 mm dia bore all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

S&F as in repairs 15 mm bore fancy type sink cock (wall mounted) with 150mm (6") long swivel spout, wall flange and provision for WP connection, cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises all as specified and directed.

M&L Non Skid coloured ceramic tiles, 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing shade of the tile all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick, light shade area of each tile exc 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing tile including Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes all as specified and directed.

M&L Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed.

As per item No 73 above but in vertical surfaces like skirting, Dados

M&L glazed tiles digital coloured ceramic tiles 450x300x7 or 600x300x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

M&L rendering 10mm thick cement mortal plaster 1:4 on fair faces of brick work or concrete surfaces all as specified and directed.

M&L Hi-Gloss digital ceramic tiles in vertical surfaces tile of size 600mm x 1200mmx 8 to 10 thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.

S&F 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards all as specified and directed by Engg-in-charge.

S&F 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading all as specified and directed by Engg-in-charge.

S&F in repairs of Partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver all as specified and directed by Engg-in-charge.

S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm of any shape all as specified and directed.

S&F in repairs of stainless steel modular thali-plate basket SS 304, size of 520x485x200mm,heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed.

S&F in repairs of stainless steel modular perforated cutlery basket SS 304 size of 52 x 48.5 x 10 cm with heavy duty and grade steelwith finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs of stainless steel glass tray plate tray having length of 610mm, corrosion resistance telescopic drawer channel all as specified and directed.

S&F in repairs of stainless steel triple cutlery inserts having length of 500mm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs of stainless steel 304 grade, size 180x515x485mm pull out detergent rack having two shelves spaces with telescope drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F in repairs of stainless steel grain trolley SS 304 having size of 525x485x350mm, with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

S&F in repairs of stainless steel slim Ergo single square rail 550mm anthracite finish with heavy duty and grade steel with finish of zinc, corrosion resistance telescopic drawer channel having weighing capacity of 25 kg all as specified and directed.

Taking down Chowkhats or frames with shutters without taking off shutter from the frame area n exc 1.50 sqm each all as specified and directed..

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for styles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming styles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with PVC sheet beading, and joined together with solvent cement adhesive all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009

S&F in repairs 125 mm Aluminium barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed.

S&F in repairs 125 mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed all as specified and directed.

S&F 300 mm long Aluminium, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and as directed.

S&F 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts all as specified and as directed.

S&F in repairs 100 mm Aluminium Butt hinges, with mild steel hinge pin, bright polished and fixed, type B-11 all as specified and as directed.

S&F in repairs 100 mm brass Butt hinges, with mild steel hinge pin, bright polished and fixed, type B-11 fixed all as specified and directed.

S&F in repairs 125 mm long brass butt hinges, cast type, fixed all as specified and as directed.

S&F in repairs 150 mm long brass handles, cast type, fixed all as specified and directed.

S&F in repairs 75 mm Mortice lock, vertical type, of Aluminium of 4 lever all as specified and directed.

S&F in repairs 75 mm Mortice lock, vertical type, of brass of 4 lever all as specified and directed.

S&F in repairs Aluminium drawer handles, projection drop (50mm to 65mm) on screwed plate all as specified and directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass all as specified and directed.

S&F in repairs 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed.

S&F in repairs Brass knobs 35-40mm in diameter all as specified and directed.

S&F 140 mm long floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

M&L in repairs for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. Note The item includes brackets, clamps and other similar small items

S&F stainless steel Double Coat Hook of suitable colour all as specified and as directed

M&L for 10 mm thick toughned glass as in any work including cutting to shape drilling holes required and with suitable bracket all as specified and directed. Note:- The item includes the cost of itcheing

M&L for preparation of new painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (up to four storeys bldgs) including use of scaffolding where required for external painting of steel surfaces all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint (from five storeys to Eight storeys bldgs) including use of scaffoldings where required for external painting of steel surfaces all as specified and directed.

M&L crack filler for exterior plastered surfaces upto 10 mm all as specified and directed.

M&L for smart care crack seal compound for both interior and exterior surfaces, crack bridging ability for plaster cracks upto 3 mm all as specified and directed.

M&L for Providing 2 to 2.50mm thick FRP chajja of approved pattern/shape/size (with sides & front drop etc), colour/pattern as of Mangalore clay tile (the FRP chajjas shall be moulded in gel coat finish, the thickness shall be 4 mm and back patti to be additionally reinforced with core matt, all resins and pigment shall be fully weatherable and UV established, core malt shall be used with GSM for extra thickness, necessary FRP covered metal), chajjas shall be fixed in position with and including 8mm dia and 125mm long split fastener bolts (Shakti or equivalent as approved by the GE) spaced not more than 45cm C/C and also filling the gaps with polysulphide sealant including necessary scaffolding/erection of working platform all as specified and directed.

S&F in repairs vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets all as specified & directed. M

S&F in repairs Brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand Basin all as specified and directed.

S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs and wall flange (without hand an overhead shower) all as specified and directed.

S&F in repairs 15 mm dia bore fancy type chromium plated long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule all as specified and as directed.

S&F in repairs chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws all as specified and directed.

S&F in repairs in brass chromium plated towel rack with 3 hooks 18" (Oval Range) all as specified and directed.

S&F in repairs chromime plated, cast copper alloy jet spray with 1 mtr SS chrome plated hose and hook (for European seat) all as specified and directed.

M&L in repairs single piece WC with PP thin rim seat cover white, fixing accessories, accessories set and cistern fitting size 665x355x770 mm and necessary fittings all as specified and directed.

S&F for mirror cabinet PTMT of 400mm x 500 mm with megnetic looking arrangements fixed with and inclduling chromium plated brass screws and PVC rawl plugs all as specified and directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 5.5 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.5 sqm in each pane frosted on one side all as specified and directed.

S&F in repairs aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F LED kerb stone of size 500 mm x 150mm x 200 mm built in 1:4 cement mortar made out of five foundation rods ensuring complete protection against theft and having LED strip of length 470 mm with 22 Nox LED which is plastic coated and having adequate number of connectors and one power supply kit as per manufacturer requirement all as specified and directed by Engineer-in-Charge.

S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications all speccified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 15 mm size, minimum weight 142 grams all as specified and as directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm size, minimum weight 210 grams all as specified and as directed by the Engineer-in-Charge.

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 25 mm size, minimum weight 455 grams all as specified and as directed by the Engineer-in-Charge.

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 1000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 2000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repairs rotational moulded polyethylene water storage tanks of capacity 5000 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repairs CI colour black round shape with dia 450 mm double seal with locking arrangement for specially desgine with heavy duty cover for over head tank fixing at any height all as specified and as directed by the Engineer-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

M&L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories including with and fix concealed 1.2 mm thick pressed steel sunken box along with cover plate and frame, suitable for fixing moduler switch/ socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module all as specified & directed.

All as per serial item No.3 here-in before but for bell point controlled by one switch.

All as per serial item No.3 here-in before but for One ceiling fan by one switch & regulator

All as per serial item No.3 here-in before but for One 3 pin socket point 5 Amps on independent board

All as per serial item No.3 here-in before but for One 3 pin socket point 5 Amps on same board

All as per serial item No.3 here-in before but for one socket point 15 Amp with 2.5 Sqmm PVC unseathed FRLS wire along with 2.5 Sqmm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed by engr-in-charge.

M&L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, passing through PVC casing caping including modular PVC Gang box of suitable module for mounting of modular Switchs & Sockets as required at site along with one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLSH as earth wire connected to earth dolly all as specified & as directed by engr-in-charge for one light point/ Exhaust fan/ Wall Fan point controlled by one switch all as specified & as directed.

All as per serial item No.9 here-in before but for bell point controlled by one switch.

All as per serial item No.9 here-in before but for One ceiling fan by one switch & regulator

All as per serial item No.9 here-in before but for One 3 pin socket point 5 Amps on independent board

All as per serial item No.9 here-in before but for One 3 pin socket point 5 Amps on same board

All as per serial item No.9 here-in before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLS wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly all as specified & as directed.

S&F Moduler Switch flush type single pole, one way 6/10 Amp including PVC Box and cover plate of required size all as specified & directed.

S&F Moduler Switch flush type single pole, one way 16 Amp including PVC Box and cover plate of required size all as specified & as directed.

S&F Moduler socket 2/3 pin 6 Amp including PVC Box and cover plate of required size all as specified & directed.

S&F Moduler socket 6/16 A, 2/3 pin including PVC Box and cover plate of required size all as specified & directed.

S&F Moduler stepped type electronic fan regulator 450 watt flush type, two module including PVC Box and cover plate of required size all as specified & directed.

S&F Moduler bell push, 2 modue, 10 Amp. including PVC Box and cover plate of required size all as specified & directed.

S&F Switch flush type single pole, one way 6/10 Amp including PVC Box and Hylem sheet of required size all as specified & directed.

S&F Switch flush type single pole, one way 16 Amp including PVC Box and Hylem sheet of required size all as specified & directed.

S&F socket 2/3 pin 6 Amp including PVC Box and Hylem sheet of required sizeall as specified & directed.

S&F socket 6/16 A 2/3 pin including PVC Box and Hylem sheet of required sizeall as specified & directed.

S&F stepped type electronic fan regulator 450 watt flush type, two module including PVC Box and Hylem sheet of required size all as specified & directed.

S&F bell push, 2 modue, 10 Amp. two module including PVC Box and Hylem sheet of required sizeall as specified & directed.

S&F Modular electronic Bell ding dong 2 Module, AC, 230 volts all as specified and directed

S&F capacitor of rating 2.5 mfd all as specified and directed.

S&F in repairs Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed.

S&F in repairs non-metallic PVC casing capping of size 25X12mm dia (for fixing the telephone cable and lan cable) all as specified and directed

M&L for Sub main wiring with two run of 10 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Panel / Main DB to house SPN DB all as specified & as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduit shall be measured as one length.

M&L for Sub main wiring with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Panel / Main DB to house SPN DB all as specified & as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M&L for Sub main wiring with two run of 4 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 4 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from Internal DB to DB all as specified & as directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduite shall be measured as one length.

M&L for Aluminium PVC coated service wire 2 core, 6 Sqmm unarmoured for connecting DB to DB including saddling at walls and excavating at required places all as specified & directed.

S&F in repairs 20 watt LED 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed

S&F in repairs surface mounted 9/10 watts LED tube light fitting and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting all as specified & directed.

S&F in repairs 20 watt curved shaped LED mirror light warm/ bright white type high efficiency in built sensorin in repairs, 4 feet long fixed on pvc square for mounting the fittings and electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed

S&F in repairs decorative wall mounting fitting, working on 240 volts, 50 hz AC supply fittings comprising with stainless steel finish fixture including with opal glass diffuser and with led bulb of capacity 7 WATT all as specified and directed.

S&F in repairs wall fitting one LT Conical opal glass mirror light with LED Lamp one 4/6 watt and conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed

S&F in repairs bed side off white/ivory fabric shade LED light fitting, with chrome finishing including LED lamp of capacity 4 Watt and an adjustable reading led light fitted to it at bottom, electrically conncected with suitable size of pvc insulated multistranded copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) all as specified and directed

S&F in repairs for Exhaust fan metal body/Plastic having 70 watt power double ball bearing high speed of sweep size 300 mm, in built bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified & directed.

S&F in repairs LED Mirror light fittngs 2 feet 10W extruded polycarbonate, golden type integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size all as specified and as directed

S&F in repairs recess Mounting LED panel, 1'x1'/ Circular Type, 12 Watt capacity, warm white/ bright white, environmental friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser with acessories suitable for Armstrong/Grid ceiling all as specified and directed .

S&F in repairs recess Mounting LED panel, 1'x1'/ Circular Type, 15 Watt capacity, warm white/ Bright White, environmental friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser with acessories suitable for Armstrong/Grid ceiling all as specified and directed .

S&F in repairs recess Mounting LED panel, 1'x1'/ Circular Type, 18 Watt capacity, warm white/ Bright white, environmental friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser with acessories suitable for Armstrong/Grid ceiling all as specified and directed .

S&F in repairs LED 36 Watt 3000 K/6500K, Slim raccess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified & directed.

S&F in repairs LED building security light fitting 45 Watt, luminaire fixture in IP 66 protection level output of LED lamp efficiency minimum 100 lumen per watt after all losses, pressure die-cast aluminium housing LED Street light complete with GI clamp including connected accessories and bracket made of GI Pipe 50mm dia light grade 1.25 m long, bend to shape with two sets of MS flat iron clamps, nuts, bolts, washers all as specified & directed. Note : The rate quoted must be inclusive of 3 core 1.5sqmm cable for connecting the light to supply.

S&F in repairs exhaust fan plastic body having 46 watt power double ball bearing high speed of sweep size 200 mm, in built bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specifed and directed.

S&F in repairs exhaust fan Plstic body having 70 watt power double ball bearing high speed of sweep size 250 mm, inbuilt bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specifed and directed.

S&F in repairs DB vertical type 6 way VTPN doubble door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

S&F in repairs DB vertical type 4 way VTPN doubble door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB.

S&F in repairs MCB TPN 63 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and directed.

S&F in repairs MCB TPN 100/125 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs all as specified and directed.

S&F in repairs sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaces board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs sheet metal enclosures double door, for DBs when MCBs to be used 240 volts 12 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaces board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.

S&F in repairs MCB SP 240 volt, 16 to 40 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S&F in repairs MCB SPN 240 volt, 40 to 63 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.

S&F in repairs down rod 2 feet long made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specifed and directed.

S&F in repairs down rod 3 feet long made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with& including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specifed and directed.

S&F in repairs down rod 4 feet long made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specifed and directed.

S&F in repairs down rod 6 feet long made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with & including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specifed and directed.

S&Fin repairs down rod 8 feet long made out of 15mm GI pipe, heavy duty, ISI mark having provision of fixing U clamp with including drilling in pipe at top and bottom for fixing Fan motor assembly, painting with superior quality white colour synthetic enamel paint all as specifed and directed.

M&L for fabrication of fan hook made out of 12mm dia MS rod suitable for fan hook bend to shape 'S' including 12mm dia SS fastner as required at site and as directed by Engr in Charge.

S&F in repairs Wall fan, made of sturdy Engineering plastic, voltage 230V, 50 Hz, RPM 1350 Copper winding of sweep 400 mm including connection as required at site all as specifed and directed.

S&F in repairs exhaust fan metal body/Plastic having 70 watt power double ball bearing high speed of sweep size 300 mm, in built bird guard and air delivery more than 450 CMM with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specifed and directed.

S&F in repairs Ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Three star rated with Squirrel Cage Induction Motor (SCIM making all electric connection. huck and suitable size rod for hanging ceiling fan all as specified and directed

S&F moduler/plastic/steel type junction box with hylam sheet of size 4x4", 4x7" and 6x8" all as specifed and directed.

S&F moduler/plastic/steel type junction box hylam sheet of size 10x12" and 8x10" all as specifed and directed.

S&F moduler/plastic/steel type junction box hylam sheet of size 12x12" all as specifed and directed.

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specifed and directed.

M&L for filling wall cavity in cement mortar 1:3 not exc 10 centimetre in girth to ends or edges including taking out existing metal or wooden sinking box and making good to wall surface for recessed / concealed modular metal flush box or concealed conduit wiring all as specified and directed.

Transportation and fixing of Exhaust fan metal body/Plastic of any size with nuts bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement including deposition old fan safely in MES store all as specifed and directed..

Transportation and fixing of Ceiling Fan of any size with hooks, nuts bolts, Down rod fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement including deposition old fan safely in MES store all as specifed and directed.

S&F steel perforated trunking system of size 150x100mm and providing sturdy nuts and bolts for connecting cable trunking steadily on to walls or lying in air steadily with help of metal frame all as specifed and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level & connected to galvanized earth strip 25X4 mm by means of bolts, nuts and washers of galvanized iron or steel upto the test point all as shown in electrical plate No.3 of SSR Part-I connected to existing earth strip including PCC earth pit with CI cover, GI funnel with wire mesh, GI protection pipe of 40 mm dia for earth lead and 20mm GI pipe for watering, excavation and earth work in any type of soil, filling the pit with charcoal and common salt surrounding the earth plate all as specified and directed by Engr-in-Charge including testing on completion.

Frends Enterprises (BID ID -3083048)

GANGAJAL (BID ID -3074096)

N F ENTERPRISES (BID ID -3083512)

Bidder Name

Frends Enterprises

SRI SAIRAM COUNSTRUCTION

GANGAJAL

N F ENTERPRISES