Repairs to roofs joinery sanitary fittings plastering sunken floor internal water supply and other allied works at AC Records and AC Depot and 58 Coy Supply under AGE BR-II at GE North Ahmednagar

Amount

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

M&L for 12 mm thick prelaminated particle board balancing white lamination on both sides,fixed with screws to frame work etc complete all as specified and directed by Engineer-in-Charge

M & L for 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for 5.5 mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares .exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading etc complete all as specified and directed by Engineer-in-Charge

S&F venetion blind have 2 incl slats that open and close with a chain / cord of vinyl or mini blinds etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium shutter from frame exc 1 sqm but n exc 2 sqm and re-fixing in position after repair etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 10 mm thick POP decorative ceiling (Gypsum anhydrous)3D model to flat surface over and including, borders and lining as approved by GE/ Engr-in-Charge with anodised aluminium snap grid frame work for false ceiling etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick fitted into the wall as per specifications and drawing PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar In any situation etc complete all as specified and directed by Engineer-in-Charge

M&L for Vitrified ceramic tiles full body vitrified tiles GVT series of Johnson or equivalent in orient bell/ kajaria/ nitco ,10 mm thick (square / rectangular) of size 800 x 800 mm of any shade as approved by GE as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles SSR series Johson/ FT series of orient bell/ dura cotto series of nitco or equivalent in kajaria make as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat cement sturry and pointed with white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles printed premium series matching to wall as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

M& L for 40 mm thick rough dressed Shahabad stone as in floor etc laid over and incl 15 mm thick screed base in cement and sand mortar (1:6) and pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

M&L for 16mm to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in cement and sand mortar (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed 15mm thick in cement & sand mortar (1:4), jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for machine cut kota stone slab flooring 20-25mm thick laid over & including 20 mm thick screed base in cement and sand mortar (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over & including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for coloured glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-Charge

M&L for Digitally printed paver tiles 300x 300x 10mm thick as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors, over and including screed bed 15mm thick in cement and sand mortar (1:4) surface finished even and fair etc complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement concrete in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M&L for providing 75mm thick plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in sub base finished rough to receive finishes etc complete all as specified and directed by Engineer-in-Charge

M & L for moorum filling in floors or paving laid in layers n.exc. 15cm thick spread leveled and rammed including watering etc complete all as specified and directed by Engineer-in-Charge

M & L hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc complete all as specified and directed by Engineer-in-Charge

M&L for RCC Type B-1 1:2:4 using 20 mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and floor slab etc complete all as specified and directed by Engineer-in-Charge

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

All as per Sl item No 34 (here-in-before) but 6 to 8 mm dia

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for providing 100 mm thick plain cement concrete 1:2:4 type B2 (40mm graded stone aggregate) as in flooring etc complete all as specified and directed by Engineer-in-Charge

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type D-0 1:5:10 using 20 mm graded aggregates and setting in cement and sand mortar (1:6) including demolition etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 10 mm thick on brick / concrete surfaces in cement and sand mortar 1:6 surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces of walls and applying two coats for cement paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of walls and apply two coats of OBD with roller finish etc complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mixture , wall mounted with bend and over head shower all as per Cat Part No MSH 1141 (for mixer) ,MSR 1090 (Over head shower) and MSH 1260 (Shower arm) of MARC OR its equivalent makes mentioned in list of makes in Appendix `C'

S&F in repairs stop cock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Oriental series) of MARC or equivalent make in list of makes mentioned in appendix `C'.

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Oriental series) of MARC or equivalent make as per list of makes mentioned in appendix `C'

S&F in repair PVC bib tap 15 mm dia, screwed for iron pipe complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent make as per list of make mentioned in appendix `C

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 of Hindware or equivalent make as per list of makes mentioned in appendix `C

S&F fix in repairs wash hand basin full pedestal pattern vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent makes as per list of make mentioned in appendix `C

Taking up or down 15 mm bore steel tubing and connections etc complete all as specified and directed by Engineer-in-Charge

All as per item No 50 (here-in-before) but 20 mm bore tubing

All as per Sl tem No 50 (here-in-before) but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings etc complete all as specified and directed by Engineer-in-Charge

All as per item No 53 (here-in-before) but 20 mm bore tubing

All as per Sl item No 53 (here-in-before) but 25 mm bore tubing

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 56 (here-in-before) but 1000 ltr capacity

All as per item No. 56 (here-in-before) but 2000 ltr capacity

S&F corner glass shelf with bracket. etc complete all as specified and directed by Engineer-in-Charge Make Jaquare Cat No CAN-1173 or equivalent makes mentioned in list of makes in Appendix `C'

S&F towel ring square CP fixed with brass screwes of etc complete all as specified and directed by Engineer-in-Chargemake Jaquare Cat No AKP-35721P or equivalent makes mentioned in list of makes in Appendix `C'

S&F toilet paper holder with flat etc complete all as specified and directed by Engineer-in-Charge. Make Jaquare Cat No AKP- 35753P or equivalent makes mentioned in list of makes in Appendix `C'

S&F Vitreous China bowl urinal flat back, size of 530 x340 x 360 mm white with grating and union for discharge pipe, urinal spreder (excluding flushing cistern, flush pipe and waste pipe). Make Jaquar Cat No URS-WHT- 707 of equivalent in Hindware / Parryware / Cera or equivalent in makes mentioned in list of makes in Appendix `C', etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel kitchen plate rack made out of 0.63 mm thick stainless steel sheet of size 36''x 36''x 10'' with complete accessories including screws etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing PVC mirror cabinet. Make: Cat Part No 555 of Prayag or equivalent in makes mentioned in list of makes in Appendix `C'

M & L for preparation of old plastered surface of wall and applying one coat of cement paint or equivalent makes mentioned in list of makes in Appendix `C'

M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall etc complete all as specified and directed by Engineer-in-Charge

S&F 18-19 mm thick veneered decorative plywood, grade 1(with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 67 (here-in-before) but 12 mm

S&F Solar control film 50 micron reflective type (gareware sun control or equivalent makes mentioned in list of makes in Appendix `C'

S&F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and directed by Engineer-in-Charge

S & F Continuous (piano) hinges,brass, bright finish or electrogalvanised Width of flaps (when open) in 30 mm etc complete all as specified and directed by Engineer-in-Charge

S&F 100 mm Brass handles, cast type, polished bright etc complete all as specified and directed by Engineer-in-Charge

Dismantling of timber scantlings 40 Sq. cm and over in section, in any position as in framed work all as specified and directed by Engineer-in-Charge

S&F in repairs for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing. Make : Armstrong or equivalent in makes mentioned in list of makes in Appendix `C'

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of Mangalore tile brick red pattern an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness complete all as directed

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness.

S&F of Steel work in tubular trusses including special shaped washer etc. complete conforming to I. S.1161-1979 grade St.-240

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs 20mm dia chromium plated curtain rods incl brackets etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide etc complete all as specified and directed by Engineer-in-Charge.

M&L for Cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils et complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and directed by Engineer-in-Charge

All as per item No 43 (here-in-before) but 1000 ltrs

An amount of Rs 83,330.00 shall be deducted from BOQ on account of schedule of credit

M/S MAHESHWARI ENTERPRISES