COMPREHENSIVE B/R MAINT IN MD OFFICER ACCN IN THE AREA OF AGE B/R-I UNDER GE (WEST) JABALPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness incl part chipping (below or above ground level) complete all as specified and as directed.

Dismantling of wall tile, floor tile, dado including bedding but backing and rubbish off permises complete all as specified and as directed.

Demolition of reinforcement cement concrete below or above ground floors of any description n exc 15 cm thickness (Reinforcement to be cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and as directed.

Demolition of brick work built in cement mortar of any description complete all as specified and as directed.

Taking down cement plaster from wall/ceiling etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exc 1.50 sqm but n exc 4 sqm each and removing to store complete all as specified and as directed .

Taking down shutter exc 1.00 but n exc 2.0 Sqm Ech of any description complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position from Roof of any description complete all as specified and as directed.

Dismantling of plain/ corrugated AC Roof sheeting of any description incl nainital or similar pattern from roof covering and removing to store complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness from Kitchen Plateform floors, aprons etc complete and removing debris from the premisescomplete all as specified and as directed.

Taking down of eves gutter,rain water pipes ,AC/PVC pipes upto 110mm dia of any size or pattern including all fittings etc complete all as specified and as directed.

M & L for 9 to 10mm thick Double Charge Virified Coloured Ceramic tiles (square/ rectangular), area of each tiles exc 0.42 sqm but n exc 1 sqm, in floors etc. over including 20 mm thick Cement mortar (1:4) screed bed set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for Vitriefied tiles 9-10mm thick LIGHT SHADE (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in patches including 15mm thick screed bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile complete all as specified and as directed.

All as per item No 14 and 15 above but as in skirting etc. over 10 mm thick Cement Plaster in CM (1:4), complete all as specified and as directed.

M&L for Granite tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed of CM (1:4) ,rounding,chamfered as in tread and riser of steps, jambs, pillars, window- cills complete as specified and as directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Glazed ceramic tiles of size 450X 300X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) all as specified and as directed complete all as specified and as directed.

M&L for Non skid ceramic joint free coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc in patches set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed..

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and as directed.

M&L for machine cut cudappa stone slab 20 to 25 mm thick over and including cement screed base 15mm thick in CM 1:6 in floors laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed.

M&L for 25 mm thick PCC (1:4:8), type D2, (using 12.50 mm graded stone aggregate) as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and as directed.

M&L for 100mm thick PCC (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in flooring including finishing top surface even and smooth without using extra cement complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in floor sub base and finished even and fair complete all as specified and as directed.

M&L for Coloured cement concrete chequered tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 15 mm thick screed bed in CM (1:6) for laying floor finish complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and as directed. .

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L 15 mm thick rendering on fair faces of brickk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and as directed.

M&L for 15 mm thick rendering in CM (1:4), mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and as directed.

M&L for Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and as directed.

M&L for 35 mm thick Second Class hard wood factory made shutters Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and as directed

S&F PVC moulded Solid door frame of size 50mm x 95mm made out of plain coloured PVC sheet and reinforced as per manufacturer design with single rebated and fixed in opening as per specifications complete all as specified and as directed.

S & F 35 mm thick factory Made moulded glazed/gauged door with pre pressed lamination on both side, solid core construction & prepaid to receive glass/wire mesh including fixing of SS wiremesh of nominal dia 0.36 mm , 2 Nos door Aluminium handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats.

S & F 35 mm thick Factory made moulded flush door with pre pressed lamination on both side, solid core construction 2 Nos Aluminium door handle, 0.3 Nos SS butt hing of 100mm , 2 nos Aluminium tower bolt 150mm length and 300 mm length Aluminium sliding door bolt in each shutter complete all as specified in SSR Part I and as directed and fitted to chowkhats.

S & F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm complete all as specified and directed.

S&F in repair 50 mm size magnet catcher, cupbord lock, safety type, Aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

M&L for MS box type section With rebate (single/double) suitable for door frame for fixing of door shutter etc complete as specified and directed.

M & L Aluminium powder coated (minimum thickness of powder coating 50 micron) sliding windows (three track) of frame of size bottom section 92.00x31.75x1.50mm ,Top and Sides of size with Powder coated aluminium shutters Top and bottom size 40x18x1.55mm and sides Styles of size 40x18x1.55mm and lock side shutter frame size 40x18x1.45mm including rubber gasket,beading and locking arrangement , both glazed and gauzed with 5.0 mm thick glass, stainless steel wire cloth netting (0.36mm nominal dia and averege width of aperture 1.40mm), and fixed including necessary glazing clips, rubber packing, aluminiunm snap beading screws and aluminium fittings of standred size complete all as specified and directed. Notes : (i) Glazing and stainless steel wire cloth Shall be included in the quoted rate

S & F Aluminium powder coated (minimum thickness of powder coating 50 micron) Ventilator louvers type frame top and sides of size 31x42x1.6 mm ( Section No 20558) rectangular tube of size 40x20x2.0mm ( Section No 14019) and middle vertical of size 42x46.20x1.60mm ( section No 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90mm ( section No 19360) including rubber gasket, beading, anodised aluminium snap beading, screws, handle,fixing 4.00 mm thick glass frosted glass , 0.36 mm nominal dia wiremesh with necessary rubber beading gasket, Louvers plate etc for Ventilator etc including necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and as directed.

S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.

S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

Butt hinges 100mm, medium weight, cold rolled Stainless steel, and fixed complete all as specified and directed.

S&F, Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F mild steel, 200 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F Floor 40-50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete all as specified and as directed.

S&F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.

S&F in repairs Stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and directed.

S&F in repair chromium plated Brass CP mixer of WHB for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Wall Mixer three in one including Provn of OH shower and including hand shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed

S&F in repairs vitreous china wash basin white flat black of size 550x 400 mm (excluding taps), waste, chain and plug including brackets complete all as specified and directed.

S&F vitreous china wash basin white Oval size 550 x 400mm Table top excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long complete all as specified and as directed.

S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and as directed.

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and as directed.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repair of Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm in repair complete all as specified and as directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and as directed.

S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and as directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F in repairs PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed

S & F in repair 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type, with white colour sunmica inner side and colour glossy sunmica outer side as in cupboards, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

S & F in repair 12 mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type, with white colour sunmica inner side as in inner part of cupboards, kitchen cabinet and in similar works complete all as specified and as directed.

S&F, in repairs, 18mm thick ply, PVC sheet with prelaminated on one side of approved texture ("Celuca Ply of Rajshree make or equivalent in "Sintex" as approved by GE) as in Kitchen cabinet and cupboard etc (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.

S&F stainless steel kitchen basket in various type of basket , plaint basket height , 4" Thali basket 8" height Cup saucer 4" heigt and perforated cutlury basket 4" height complete all as specified and as directed.

S&F hattich chennel for basket sizes 46mm wide complete all as specified and directed.

S&F stainless steel hinges for cupboards of senso (as per 3D designs) inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F Handles of senso (as per 3D designs) 150 mm inclduding all connection fitting as complete all as specified and directed and approved by GE.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.

M&L for prepartion Surfaces of new wood or wood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed

M & L preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with 2mm thick wall care putty over a coat of chalk whitining on walls complete all as specified and directed.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint ( weather proof) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including weather proof putty and priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and as directed..

M&L for Preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed.

S & F Door Seal rubber etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ ridge to wall, fixed with self tapping screws complete all as specified and as directed.

Precast PCC plain factory made tiles, ISI marked, 22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments. on 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces at upto Four storey complete all as specified and as directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

Joist, channel, angle or T-section, fixed independently without connecting plates etc,(cut to ordinary lenth i.e,within 20mm of the length indicated complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 20mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

M&L for Polishing the existing old kota stone flooring including preparation, grinding and polishing in floors complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. confirming to FE-2990 ( Gde E-165).

M&L for Providing and filling epoxy putty into RCC crack after opening up RCC cracks in V– groove manner approximate 10 mm wide & 10mm deep using mechanical cutter, properly cleaning the same to remove loose dust dirt etc and filling the same using Nitocote VF –three component, solvent free, thixotropic, Epoxy resin based putty having 100% solid contents mixed density of 1.6 g/cc, compressive strength – 50 N/mm ², pot life of 40 minutes at 27 degree C, Drying time 8 hrs. recoatable time 24 hrs. And finishing in line and level with existing concrete surface etc. complete as per in charge GE. Make; - Thermax/ webac chemicals/ chemco system as approved by the GE Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and directed by GE . Note : Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and directed by GE .

S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and as directed.

S&F in repair snap grid false ceiling system of E board exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4mm thick E board of approved design and with provn of light fixture complete all as per manufacturer instructions and as directed.

S&F in repairs Health faucet complete all as specified and as directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.

M&L MS work as in wind ties for roof including securing bolts, drilling holes, notching for wire etc complete all as specified and as directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed.

S & F in repairs Two way bib cock complete as specified and as directed.

Post Constructional Anti-termite (Chlorpyrifos 20 % EC) Treatment Along the external wall below concrete or masonry apron using chemical emulsion at the rate 2.25 liters per linear meter including drilling & plugging holes etc. in apron complete all as specified and as directed..

M&L for Providing and injecting chemical emulsion (Chlorpyrifos 20 % EC) for Post Constructional Anti termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Supply only liquid water proofing compound.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. complete all as specified and directed.

S & F in repairs Corner Glass Shelves of 30 cm size including C type bracket fixed with steel screws (of Jaquar make or equivalent make as approved by GE) complete all as specified and directed.

S & F in repair 15 mm bore brass chromium plated Sink Mixer for hot & cold water with long shank and fly nut complete all as specified and directed

S&F in repair stainless steel Nobs and bracket complete all as specified and directed.

M&L for Complete removal of existing water proofing treatment from roof and providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs- (i) Cleaning and sweeping and washing down with water to remove all dust etc from plastered roof surfaces / walls and filling of crack with sealing compound etc (ii) Bituminous based primer conforming to IS: 3384 – 1965 @ 0.3 Kg/Sqm (iii) One layer of super thermo APP modified water proofing memberane with non polyester reinforcement of any make.( M/s STP texsa ltd/Hyperplas memberane of M/S IWL India ltd/MS STPand Tikki Tar ltd). (iv) 3mm thick and minimum Weight @3.50Kg/Sqm,laid with gas torch and pasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surface after cutting necessary grooves and making good with PCC gola 1:2:4 type- B1 etc adhere to bitumen all as per manufactures instructions. (v) Applying two coat of aluminum paint @ 0.20 Kg / Sqm in two coats over bitumen layer as per manufacturer instruction . (application including sides lap,over laps shall be provided not less than 10 cm and joint sealed with torch as per manufactureerr's instructions specifications and as per particular specifications complete all as specified and directed.

M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3% by wight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and direcated (WPC shall be measured & paid seperately)

M&L for Washed stone grit plaster on exterior wall in two layer under 12 mm cement plaster 1:4 (1 cement : 4 coarse ) furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 kg of cement per square metre,top layer 15 mm cement plaster 1:1/2:2(1 cement:1/2 coarse sand:2 stone chipping 10 mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing ,the top layer with brushes and water expose the stone chippings complete all as specified and as directed.

Preparation of old decorated surfaces of walls and applying two coat of exterior emulsion weather coat/ anti Dust paint over weather proof putty white or tinted complete all as specified and as directed.

M&L for applying water proofing coating after Cleaning of roof slab surface of any height, repair all cracks/undulations and making good & applying three coats pidilite product Dr fixit roof seal water proofing as per manufacturer instruction complete all as specified and as directed.

M&L for outdoor full body Vitrified tiles 30 cm x 30 cm x 10 mm thick, jointed and pointed in neat cement slurry and pointed in white on coloured cement to match as in floors etc laid over in patches and including screed bed or bedding layer of cement mortar 1:6, 15 mm thick etc complete all as specified and as directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding suitable for door shutters of 701-805 mm in width & wt between 36-60 kg complete all as specified and as directed.

Supply & fixing in repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding as per drawing complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Running welding in repairs n exc 6 mm thick metal (one welder with helper as per requirment base must be depolyed with thin 12 hours . Other wise penlty per Rupees Day 500 /) complete all as specified and as directed.

S&F for looking mirror of size 5 feet X 3.5feet with designer glass (5mm thick ) and frame to be fitted with wall including all necessary arrangements (fixed with SS studs ) and fittings complete all as specified and as directed.

S&F in repairs framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and as directed.

S&F solar control film 25 micron reflective type (garware sun control or equivalent) complete all as specified and as directed.

Hemant Associate (BID ID -3429864)

Kirti Chandeliya and Assosicates (BID ID -3434602)

JUPITER TRADERS (BID ID -3434630)

DEEPAK CONSTRUCTION (BID ID -3434707)