Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
7 Aug 2026, 3:00 pm
Execution of Civil Zonal Work for repair and maintenance of staff quarters under SSE/W/MIB for the period ending up to 30.06.2027 under the Jurisdiction of ADEN/W/NGP.
S-11-NAG-2026-2027
S-11-NAG-2026-2027
Open
Works - General
10 Months
Unknown (Unspecified Location)
₹0
₹2.8 L
15 Jul 2026
15 Jul 2026
24 Jul 2026
A-All chapter /Code of CPWD-DSR-23 ver-1. Note:- The chapter/code are Above/
C-Execution of works involved in the work covered by various chapter of
3 mm thick translucent white acrylic plastic sheet.
Stone Aggregate (Single size) : 20 mm nominal size.
Stone Aggregate (Single size) : 10 mm nominal size.
Coarse sand (zone III).
Common burnt clay F.P.S (non modular) bricks class designation 7.5.
Mild Steel Binding wire as per IS 280
Hydraulic door closer ISI marked (IS 3564-1996)
Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm.
MS heavy weight butt hinges 100*75*3.5 mm IS 1341 marked
Oxidised mild steel screws 40 mm
Oxidised mild steel screw 25 mm
Oxidised mild steel sliding door bolt 300x16 mm.
Oxidised mild steel tower bolt (barrel type) 200x10 mm.
Anodised alluminium Handles 125mm with plate 175*32 mm
Oxidised mild steel handles 100 mm
Anodised Aluminium sliding door bolt 250x16 mm.
Anodised Aluminium tower bolt (barrel type) 200x10 mm.
Anodised Aluminium handles 125 mm with plate 175 x 32 mm.
MS wire nails 25-100 mm
Block board construction flush door with commercial ply on both faces 30 mm thick.
Block board construction flush door with commercial ply on both faces 25 mm thick.
Second class teak wood in scantling.
1.0mm thick decorative laminated sheet (mat finish)
Water proof ply 12mm thick.
UV stabilised 2mm thick plain/corrugated GFRP sheet
Ply wood 5 ply with commercial ply on both faces 6 mm thick.
Flats up to 10 mm in thickness.
Linseed oil (double boiled).
Aluminium paint in two containers
Synthetic Enamel paint in all shades
plastic emulsion paint
oilbound washable distemper / acrylic distemper
Water proofing cement paint/snowcem
Premium Acrylic exterior paint.
G.I. pipes 50 mm dia medium class
P.T.M.T Urinal cock 15 mm dia (Poly Tetra Methylene Terephthalate)
P.T.M.T. Bibcock with nozzle 15 mm
P.T.M.T. Stop cock (concealed) 15 mm
P.T.M.T. extension nipple 15 mm dia
P.T.M.T. extension nipple 20 mm dia
15 mm PTMT ( Poly Tetra Methylene Terephthalate) bib cock
PTMT push cock 15 mm dia. ( Poly Tetra Methylene Terephthalate)
C.P.Brass bibcock 15mm
C.P.Brass long body bibcock 15mm
C.P.Brass stop cock (concealed) 15mm
C.P.Brass angle valve 15mm
Polyethylene water storage tank with cover and suitable locking arrangement
Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore Flanged C.I. standard specials upto 300 mm dia (heavy class)
Flanged C.I. standard specials upto 300 mm dia (heavy class)
White plastic seat W C (solid) with lid C.P. brass hinges and rubber buffers
Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia
HP. or L.P. ball valve with polythene floats: 15 mm dia
Vitreous china angle back wash basin 600x480 mm (White)
Vitreous china orrisa type w.c. pan size 580 mm (white)
Vitreous china pedestal type water closet (white)
C.I. bracket for wash basin and sinks
Mirror of superior make glass 60x45 cm (With 5-6mm thick base complete)
Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings
Flushing Cistern P.V.C. 10 litres capacity (low level) (White) (with fittings, accessories and flush pipe)
White vitreous china clay half stall urinal flat back 580x380x350 m m o r angle back 450x375x350 mm with waste fittings as per IS : 2556
C P brass Waste coupling 32/40 MM
CP brass Bottle Trap 32/40 MM
Bleaching powder
Polyvinyl chloride sheet 400 micron thick
Chlorpyriphos 20% E.C. I Lindane 20% E.C. For termite treatment
U-PVC pipes (working pressure 4 kg/cm2 )Single socketed pipe 110mm dia
Pozzolana Portland Cement
S&S C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300mm dia
Rubber packing / insersion washer all size and thickness
Miscellaneous G I pipe fittings as nipples/ elbows/ sockets/ bends for GI pipe work.
U-PVC pipes (working pressure 4 kg/cm2 )Single socketed pipe 75m dia
H.P. or L.P. ball valve with polythene floats: 25 mm dia
H.P. or L.P. ball valve with polythene floats: 20 mm dia
Coloured Pedestal type W.C. pan 580x440 mm (European type)
Full way brass valve with wheel15 mm dia
Magnesium poly phosphate based concrete fast repair epoxy
Hiring of JCB Machine (in good working condition) for leveling and dressing ground / dismantling structures including disposal of debris through dumpers etc. with contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall arrange
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-VA.pdf
ATTACHMENT
GCC-2022updatedtillACS-10.pdf GCC 2022 updated till ACS 10
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
AnnexureJ.pdf
ATTACHMENT
AnnexureMNonBlacklisting.pdf
ATTACHMENT
AnnexureAEngg.Org.A.PDF
ATTACHMENT
AnnexureBPlantMachineryB.PDF Annexure B
ATTACHMENT
AnnexureCWorkinHandC.PDF
ATTACHMENT
AnnexureE-EFTdetailE.pdf
ATTACHMENT
Annexure G
ATTACHMENT
AnnexureWExperianceW.PDF
ATTACHMENT
AnnexureXEmployerX.PDF
ATTACHMENT
AnnexureVIA.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureBPlantMachineryB.PDF
ATTACHMENT
Annexure-G-VitiationdetailsG.PDF
ATTACHMENT
GCC-2022updatedtillACS-10.pdf
ATTACHMENT
Download all tender documents and submit your bid