REPAIR AND MAINTENANCE OF SOS COMPLEX AND FIXTURE OF SAFETY RAILING ON BALCONY AT FIRST FLOOR AND PROVISION OF PAVER BLOCK IN P1 AND P5 BUILDING IN OTM COMPLEX AT PARADIP

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specifed and as directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surfaces using Liquid water proofing compound of wall including finished even and smooth without using extra cement complete all as specified and directed.(Note : WPC Shall be meassured and paid separately)

Supply only Liquid water proofing compound(Make:Pidillite/Fosroc)

Material & Labour for preparation of new plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new plastered surface complete all as specified and directed.

M & L for joint free Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incluidng 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for stainless steel framed work (Grade 304) railing made of hollow tubes,channels, plates etc. polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement complete all as specified and directed.

S & F 110 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 110mm dia PVC (SWR) bends with access door complete all as specified and directed.

S & F 110mm dia PVC (SWR) plain shoe complete all as specified and directed.

M & L for Cement concrete Type-B1 ,(1:2:4) using 20 mm graded stone aggregate as in cills,steps,seismic,parapet and railing upto 60cm in height ,coping, kneelers, apex stones, bed plates, kerbs, water troughs and like including weathering,slightly rounded and chamfered angles throating and necessary formwork complete all as specified and directed.

Dismantling of Plain or corrugated AC/steel sheeting, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S & F mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L for preparation of new steel suface of any description not otherwise described, over 10 cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each complete all as specified and directed.

Taking down Chowkhats or frames with shutter(without taking off shutters from frames) not exc. 1.5 sq. m each complete all as specified and directed.

Taking down shutter exc 1 Sqm but not exc 2 sqm and refixing in the same opening complete all as specified and directed.

S & F Anodised aluminium powder coated frames(minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F Anodised aluminium powder coated door (minimum thickness of powder coating 50 micron)shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M & L for 2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete all as specified and directed.

Supply and fixing 40 mm thick second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 35 mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with particle board core shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 300 mm long complete all as specified and directed.

Supply and fixing butt hinges 125mm size medium weight, cold rolled mild steel, and fixed to wooden frames complete all as specified and directed.

Supply and fixing 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and directed.

S & F (25 x 5)mm flat iron as in hold fast for fix wooden door frame complete all as specified and directed.

S & F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Stainless steel 25 mm fancy type curtain rod complete all as specified and directed.

S & F Stainless steel Fancy bracket for fixing curtain rod complete all as specified and directed.

S & F Aluminium (extruded section body)Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Material and labour glazed ceramic coloured tiles of size (300x450mmx7mm) thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and directed.

Material and labour for preparation of old plastered surface of wall by complete removal of existing treatment and applying two coats of oil emulsion distemper over a coat of chalk whitening priming paint over a coat of 1mm thick plaster of paris wall care putty complete all as specified and directed.

Supply and fixing 4.8mm thick Sheet glass, ordinary quality and glazing with rubber neuprine in square exc 0.5 sq. m in each pane fixed to aluminum framing complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for 75mm thick PCC( 1:2:4) type B-2, using 20mm graded stone aggregate as in plinth protection, finished even & smooth without using extra cement complete all as specified and directed.

M & L for surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in loose /soft soil complete all as specified and directed.

M & L for Removing excavated materials to a distance n exc 50 meter and depositing where directed at a level n exc 1.5 meter above the starting point complete all as specified and directed.

M & L Hardcore of broken stones or boulders of gauge n.exc 63mm deposited,spread & levelled in layers n.exc 15cm thick, watered & rammed to a true surfaces complete all as specified and directed.

M & L for PCC( 1:4:8) type D-2, using 40mm graded stone aggregate as in sub base of Paver block, complete all as specified and directed.

M & L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.

Providing and laying 55-60mm thick coloured glazed rubber mould, pre coated interlocking or without interlocking paver block of any shape and size confirming to IS 15658-2006 with upto date amendments, M-35 Grade with grey cement with pigment laid over and including 50 mm thick river bed fine sand complete all as specified and directed.

M & L Brickwork with flyash bricks,straight or curved on plan to any radius half brick thick wall,built in Cement mortar (1:4) complete all as specified and directed.

VIJAY ENTERPRISES