PROVISION OF HIGH MAST LIGHTING SYSTEM AND CONNECTED WORK IN TECHNICAL AREA OF DRDE GWALIOR, PROVISION OF WATER COOLER, RO IN NEW BHASKAR BLDG LASTEC AT METCALFE HOUSE DELHI AND PROVISION OF ALUMINIUM PARTITION AND KOTA STONE IN ANIMAL HOUSE, MT WORK

Amount

Supply and installation of Galvanised steel high Mast LIGHTING SYSTEM of 16 Meter high mast shafts in two sections Top dia 150 mm of 3mm thick and botton dia 360 mm of 4mm thick suitable for 47m/s wind speed, winch mounting bracket, lumanaries, carriages suitable to install 08 Nos 150 W LED lumanaries in symmetrical arrangement complete including RCC foundation work as per (Drg GE /R&D/01 /2021) or as per manufacturer's drawings and as directed by Engr-in-Charge and provision of raising lowering system comprising double drum winch, 6 mm diameter SS wire rope, trailing cable, connector, integral power tool motor 1.5 HP, manual handle, junction box, lightening finial and fixing of foundations bolts 08 Nos of size 850 mm long 30 mm dia manufactued from special steel along with nuts, washers, anchor plate and common template,including Supply and fixing LED Aviation light comprising of aluminium housing with polycarbonate enclosure including foundation of High Mast Light as per Manufacturer Drawing complete all as specified and directed at site. Note :- (i) Technical specifications for 16 Mtr High Mast Pole & Drg for foundation of pole is enclosed. (ii) Rates for RCC foundation including earth work as per manufacturer design deemed to be included in quoted rates for item srl No. 01. (iii) LED light fittings shall be measured & paid under respective item separately.

Supply, laying and testing PVC insulated and FRLS PVC round sheathed, copper conducter flexible industrial cable, 1100 V, confirming to IS 694 of size 4 Sqmm, 4 core complete including connection from junction box to High Mast Light complete all as specified and directed.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 Core complete all as specified and directed.

Supply, laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 Core complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded with 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip 32x6mm by means of nuts, bolts and washers. GI strip laid in 40 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with comprising of following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion:- (a) GI strip 32x6 mm upto 7.5 meter. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil, PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 using 20mm graded stone aggregate, exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 using 20mm graded stone aggregate, reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 32x6 mm galvanised iron strip complete all as specified and directed.

S&F LED Flood Light 150/180 watt made up of pressure die cast aluminium housings with toughened glass and high power LED and secondary lenses with IP-66 ingress protection system efficiency > 110/125 LPW, 10KV SPD included, complete including connection and testing complete all as specified and directed. Make- PHLIPS (Cat part No- BVP122 LED 150 CW HE SY20º FG XTFCL S4 )/Havells (Cat Part No. JETAVAL OURFL 180 W LED 757 MODWBLTG)/Surya (Cat Part No SLE FL 180 W IP 66 HILIOS PRO) equivalent Maked as per Appendix 'B' as approved.

S&F 4 Pole MCCB 63 Amps, 50 Hz, 415V with rupturing capacity 10 KA complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m depth & not exceeding 1.5m in width over energised LT cables for carrying out brick work for protection of cable etc complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and directed. Note : Punned thickness shall be measured.

M&L for sub class 'B' burnt brick, flate across the cable, for protection of cable laid in trenches complete all as specified and directed

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary manualy of 100 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supply and laying GI pipe light grade of 80mm dia laid in trenches for protection of UG cable complete all as specified and directed.

Demolition of cement concrete/road in ground floor and paving not exceeding 15 cm thickness below or above ground level including removal of rubbish to a distance exceeding 1.50 KM and not exceeding 5.00 KM etc complete all as specified and directed.

M&L for 100 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation and filling in mass Concrete/Road complete all as specified and directed .

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded aggregate) as in floor finishing even and smooth with using extra cement and making impression of expanded metal, while concrete is green and making good as per existing surface etc complete all as specified and directed .

Surface Excavation in all kinds of soil not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m complete all as specified and directed.

M&L for plain cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in all work up to plinth level complete all as specified and directed.

M&L for 60mm thick, factory made, cement concrete M-35 grade, paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

M&L for factory made, M-25 grade cement concrete, kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:3, making joints with or without grooves, thickness of joints not more than 5 mm (except at sharp curves) complete all as specified and directed.

Supply, installation, Commissioning and testing Automatic Power Factor Correction (APFC) panel of capacty 100 KVAR,Switching for Contactor, Automatic tempreature control through fans and lowers in panel, Double side Earthing Connection,Proven of top and bottem cable entrySupper heavy duty capacitor power capacitor for long life,Designed with fully copper conductor and panel shape /size of suitable as approved by GE for 3 phase, 4 wire, 415 Volts ,AC , 50 Hz supply, Outdoor cubical type, dust and vermin proof, pedestal mounting type suitable for Outdoor applications having suitable shape/ size canopy on top, made out of 3.15 mm thick MS sheet with using 40mm x 40mm x 5mm angle iron frame and supports, duly finished with powder coated using two coats of synthetic enamel paint of approved colour over a coat of red oxide primer all over steel surfaces complete with separate compartment of suitable shape and size with shutter and locking arrangement for each switchgear and including PCC work in (1:2:4, type B-1, using 20mm graded stone aggregate) work for fixing panel legs and bus bar of aluminium conductor suitable shape and size for 3 phase rating of 400 amps and for nuetral 300 Amps rating including fixing the cable with the panel using new lugs and glands of suitable size including following switchgear & controls :-

S&F 4 Pole MCCB 160 Amps 50 Hz 415V with rupturing capacity 25 KA complete all as specified and directed. Note :- For APFC Panel

M&L for point wiring for one socket point controlled by one switch with 4.00 Sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLSH in and including concealed PVC conduit 25mm dia, medium duty, ISI marked, including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required ponit in the board, flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 4.00 Sqmm copper conductor cable FRLSH connected to common earth duly complete including cutting, chasing the surface and then making good the same complete all as specified and directed.

S&F modular switches one way 16 Amps single pole 240V complete all as specified and directed.

S&F socket modular type 2 in 1,6/16 Amps 240V complete all as specified and directed.

S&F Reverse Osmosis plant of output capacity 25 litre per hour with RO+UV+UF+TDS control purification process to make water 100% pure, equipped with RO technology, capable to retain essential natural mineral in the purified water and make it healthy and mineral rich with 2 RO membrane and high pressure pump wall mounted cum counter-top water purification complete all as specified and directed.

M&L for circuit/submain wiring alongwith earth wire with the 2X4.0 Sqmm + 1X4.0 Sqmm earth wire of FRLSH PVC insulated multistranded copper conductor multistraded cable in and including concealed PVC conduit pipe 25mm external dia, medium grade including all accessories complete all as specified and directed.

Supply, installation, commissioning of water cooler fully stainless steel, electric driven, single phase, having approx stroge capacity 80 ltrs and substantial cooling capacity 40 ltr per hour complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure 4 way MCB DBs with 200 Amps rates bus bar, double door complete all as specified and directed.

S&F MCB SPN, 40 Amps, 240 volts, 10 KA complete all as specified and directed.

S&F MCB SP, 16 Amps, 240 volts, 10 KA complete all as specified and directed.

S&F white rotational moulded polye thylene water storage tanks of capacity 750 liters (cylindrical vertical with closed top), double layer, hosited and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F PPR Gate Valves (Brass Insert) of 32mm bore complete all as specified and directed.

S&F PPR Gate Valves (Brass Insert) of 20mm bore complete all as specified and directed.

S&F 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete walls, ceiling or in floors etc of outer dia 16mm complete all as specified and directed.

S&F 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete walls, ceiling or in floors etc of outer dia 32mm complete all as specified and directed.

M&L for providing cement concrete 1:3:6 type C1 (20mm graded stone aggregate) for plateform for PVC water storage tank of capacity 750 Ltr in round shape and smooth finish complete all as specified and directed.

Material and Labour for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded with 15cm thick layers of common salt and charcoal dust starting from ground below with 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron wire 4mm dia by means of Copper nuts, bolts and washers. GI wire laid in 20mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with comprising of following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI wire 4 mm dia upto 7.5 meter. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil, PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 (using 20mm graded stone aggregate) exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 (using 20mm graded stone aggregate) reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

S&F GI wire of size 4mm dia for earth continuity conductor complete all as specified and directed.

S&F 50 micron thick powder coated aluminium section swing door shutters, partly panelled and partly glazed, comprising top rail 85.00mmX44.45mmX2.70mm, bottom rail 150mmX44.45mmX2.20mm, lock rail 150X44.45mmX3.00mm and styles 47.62mmX44.45mmX1.62mm including jointing cleats,alum snap beading, rubber gasket, glazing clips and two Nos disc type handles and one nos aluminium tower bolt 200mm long for each leaf on one side and 01 no 6 lever dead lock of brass for each leaf fixed in position complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tonge anodised with hard drawn steel spring with overall length of cover plate 150mm complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F 50micron thick powder coated aluminium section partly glazed / partly panelled partitions and fixed glazing, frame made out of aluminium frmae of section 63.50mmX38.10mmX1.60mm thick including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading, SS screws etc, frame work fixed to walls, floors and ceiling with rawl plug wherever required complete for each leaf complete all as specified and directed. Note :- Glass and prelaminated particle board shall be measured and paid seperatly in respective item.

M&L 12 mm thick Prelaminated particle board, interior grade, prelaminated on both side with decorative choice laminations, fixed to aluminium frame work complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality of any colour, fixed in aluminium frame work in area exceeding 0.5 sq. m in each pane complete all as specified and directed.

S&F 100 mm long brass Mortice lock, 4 lever, vertical type, size 100 mm complete all as specified and directed.

M&L for Mirror Polished Kota Stone slab flooring 18-20 mm thick, over and including 20 mm thick cement screed bed in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed.

Dismantlng wrought iron or mild steel work of any description not otherwise provide for complete all as specified and directed.

S&F Steel work in tubular trusses, medium graded Ornamental shape (Curved shape) including special shaped washer etc. (Post height appx 4 to 5 m) complete using ERW or induction butt welded tubes conforming to IS-1161-1998 grade St-240, complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm in width or girth including preparation of new or previously untreated surfaces of steel complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.)/Fiber reinforced sheets and similar in roof coverings complete all as specified and directed.

M/s KUMAR BUILDERS