Karnataka

AOC

Works

Buildings

CONSTRUCTION OF KANAKADASA COMMUNITY HALL IN WARD NO 15 AT TMC BYADAGI LIMIT

Directorate Of Municipal Administration

DMA Town Municipal Council Byadgi | Karnataka

Amount: ₹3.4 CrCloses: 20 Dec 2025Closed

Timeline

Published4 Dec 2025
Closed20 Dec 2025
Awarded—

Bids

1 Bid20 Dec 2025

#	Company	Amount	Status
1	BASVARAJ KUMBAR ₹3.3 Craccepted-aoc	₹3.3 Cr	accepted-aoc

Tender Value

₹3.4 Cr

EMD Value

₹5.1 L

Closing Date

20 Dec 2025, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

sangamesh

Mobile Number

Work Description

CONSTRUCTION OF KANAKADASA COMMUNITY HALL IN WARD NO 15 AT TMC BYADAGI LIMIT

Tender Information

Tender ID

DMA/2025-26/BD/WORK_INDENT41807/CALL-2

Reference Number

DMA/2025-26/BD/WORK_INDENT41807/CALL-2

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

DMA Town Municipal Council Byadgi

Source Website

Subscribe to view

Documents Required

18 documents required · 18 mandatory

Technical Bid

RequiredWork Done Certificates for the Work performed as Prime Contractor in the same name on works of similar nature during the five years specified similar nature of Work done certificate i.e. 50percent of amount put to tender for Rs 169.16 lakhs

RequiredThe Work Done Certificates for the Quantities of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document,Cement Concrete Plain and Reinforced 761.96 Cum,TMT Steel reinforcement 55.93Tonne,Polished flooring Granite stone Vitrified Tiles / Internal Flooring tiles for Building Indoor 1681.66 Sqm,Load bearing wall BBM Concrete Blocks AAC Blocks 1210.11Sqm or 278.33Cum

RequiredValid contractor license certificate issued from competent authority in Civil Contractor Class 1

RequiredThe Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 5.75 lakhs

RequiredThe Tenderer or his identified sub contractor should possess valid license for executing water supply or sanitary engineering works and should have executed similar water supply or sanitary engineering works totaling Rs.4.31 lakhs

RequiredAvailability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Concrete Batch Mix Plant/Rotavator 1no own Excavator 1no own,Tippers req 2nos 1own/1hire, ,Water Tanker req 2nos 1own/1hire as mentioned in Kw4 document.

RequiredValid PAN Card of the Participating Bidder

RequiredValid GST Registration Certificate

RequiredLine of Credit i.e. 30percent of amount put to tender obtained from Nationalized or Scheduled Banks in Given Pro forma in the bid document,Rs 100.50 lakhs

RequiredFinancial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details achieved in at least two financial years a minimum financial turnover of Rs 676.64 Lakhs

Requiredprofit and loss statement in the name of the participating bidder

RequiredITR Returns filed Copy in the name of the participating bidder

Requiredbalance sheet tallying the Annual Turn Over during the previous five years in the name of the participating bidder

RequiredThe Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. A.Existing commitments and on-going works along with the details in the format as in the bid document

RequiredThe Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. B.Works for which Tenders already submitted along with the details in the format as in the bid document

RequiredSigned Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person and Designation, Contact Number Office Landline or Mobile, and valid email ID.

RequiredNotary Self Attestation regarding Agreed to Terms and Conditions as per bid document kw4 on face value of Stamp Paper not less than Rs 500

RequiredNotary Affidavit Declaration that the bidder has not been blacklisted on Stamp paper of Face Value not less than Rs 500

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Satisfactoriy completed (atleast 50%) as prime contractor at least one such similar work of value not less than Rs, xxxxxxx (50% of estimated cost of tender)

Royalty on construction materials and other taxes will be deducted as per prevailing Govt. orders as may be modified from time to time

The tenderer shall scan original Workdone certificates Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

If the quoted bid amount is less than the tendered amount, the difference in amount shall be remitted in the from of FDR DD Bank Guarantee in the name of Executive Engineer DUDC Haveri from any of the Nationalized Banks/Scheduled Banks and shall only be returned/refunded after the Completion of the Defect Liability Period

The Tenders/ Bids are invited as per Standard tender Bid Document KW4 The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions. contained in standard bid document KW4

The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered firms with consultants with the Third Party

The contractor has to make his own arrangements for procurement of all materials required for completion of the work in all respects. The contractor shall use relevant ISI mark materials for the work and also obtain necessary quality control certificates from the authorized quality control authority

Tender application amount shall not be refundable

The Department is not responsible for any delay caused in accessing the https://kppp.karnataka.gov.in portal

The payments for the wok will be made depending upon the availability of funds

The Defect liability Period for the work carried out is 730 days (2 years) from DATE OF COMPLETION OF WORK

Financial turnover of previous years shall be given a weight age of 10% per year to bring them to the price level of the 2025-26

The time period for completion of the work is 12 months

The Applicable GST shall be paid separately

List of works for which tenders already submitted and List of existing commitments and ongoing work

Technical Criteria

Past Experience

Work Done Certificates for the Work performed as Prime Contractor in the same name on works of similar nature during the five years specified similar nature of Work done certificate i.e. 50percent of amount put to tender for Rs 169.16 lakhs

Work Done Certificate

The Work Done Certificates for the Quantities of work executed as prime contractor in the same name during the last five years specified along with the details in the format as in the bid document,Cement Concrete Plain and Reinforced 761.96 Cum,TMT Steel reinforcement 55.93Tonne,Polished flooring (Granite stone / Vitrified Tiles / Internal Flooring tiles for Building Indoor) 1681.66 Sqm,Load bearing wall (BBM/Concrete Blocks/AAC Blocks) 1210.11Sqm or 278.33Cum

Work Done Certificate

Capabilities of Vendor

Valid contractor license certificate issued from competent authority in Civil Contractor Class 1

PWD Registration Certificate (Class I/II/III/IV)

The Tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs. 5.75 lakhs

Others -- electrical license

The Tenderer or his identified sub contractor should possess valid license for executing water supply or sanitary engineering works and should have executed similar water supply or sanitary engineering works totaling Rs.4.31 lakhs

Others -- valid license for executing water supply

Availability by owning equipments by ownership 50 percent and on hire or lease 50 percent all relevant valid documents,Concrete Batch Mix Plant/Rotavator 1no own Excavator 1no own,Tippers req 2nos 1own/1hire, ,Water Tanker req 2nos 1own/1hire as mentioned in Kw4 document.

Others -- Equipments

Valid PAN Card of the Participating Bidder

Others -- Pan Card

Valid GST Registration Certificate

Others -- GST Registration Certificate

Financial Status

Line of Credit i.e. 30percent of amount put to tender obtained from Nationalized or Scheduled Banks in Given Pro forma in the bid document,Rs 100.50 lakhs

Line of Credit

Financial Turnover certificate obtained and certified by the Registered Valid Chartered Accountant indicating the Registration no of chartered accountant with UDIN Number Details achieved in at least two financial years a minimum financial turnover of Rs 676.64 Lakhs

Audited CA Certificate of Annual Turnover

profit and loss statement in the name of the participating bidder

Others -- profit and loss statement

ITR Returns filed Copy in the name of the participating bidder

ITR Filed Copy (Mentioning PAN)

balance sheet tallying the Annual Turn Over during the previous five years in the name of the participating bidder

Others -- balance sheet

Others

The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. A.Existing commitments and on-going works: along with the details in the format as in the bid document

Others -- On going work Details

The Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender. B.Works for which Tenders already submitted along with the details in the format as in the bid document

Others -- Tenders already submitted

Signed Copy by the Participating Agency on the Letter head containing the Address and Contact Details indication Contact Person and Designation, Contact Number Office Landline or Mobile, and valid email ID.

Others -- Bidder Details

Notary Self Attestation regarding Agreed to Terms and Conditions as per bid document kw4 on face value of Stamp Paper not less than Rs 500

Others -- Notery

Notary Affidavit Declaration that the bidder has not been blacklisted on Stamp paper of Face Value not less than Rs 500

Others -- Notary Affidavit

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹5.1 L

Important Dates

Last Activity

20 Dec 2025

Published

4 Dec 2025

Bid Opening

22 Dec 2025

Download Ends

19 Dec 2025

Pre-Bid Meeting

8 Dec 2025

BOQ Preview

•

PROPOSED CONSTRUCTION OF KANAKADASA COMMUNITY HALL IN WARD NO 15 AT TMC BYADAGI LIMIT

•

Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge.(KPWD...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and removing centering, shuttering, strutting, propping etc for all length and widths The work includes cost of all materials, labour charges, all Leads and Lifts all other incidental works ...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS21...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Concealed Conduit System-Supplying heavy gauge PVC conduit pipe......mm dia..........mm thick confirming to IS2509 with suitable size bends,metal/PVC Junction boxes,adhesive paste etc.,and running be ...

•

Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box (Page No.05. Iitem no.1.5.3 of Vol-6- -KPWD 2023-2024)

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated/galvanized metal box suitable formounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall-1-2 W...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos.of machine screws,bolts nuts etc.,complete on the existing meta...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (Page No.09. Iitem no.3.6.1 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket (Page No.09. Iitem no.3.6.10 of Vol-6- -KPWD 2023-2...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder(Page No.10. Iitem no.3.14.7 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (Page No.09. Iitem no.3.6.9 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.16 - 32 A TP (Page No.21. Iitem no.5.46.4 of Vol-6- -KPWD 2023-2024)

•

Supplying of .....feet -PVC Batten with integrated LED tube ....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V@ 50/60Hz & Powe...

•

Supplyingof 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)(KPWD - Elec Vol-06, 2023-2024: Page No.43, Item No. 6.2.1)

•

Supplying capacitor type ceiling fan complete withdown rodblades,shackle,canopies etc,for operation on 230V,50cycles.Single phase AC supply conforming to ISS-374-1979 and with double ball bearings yst...

•

Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing 'S''hook with fan regulator to the existing board to get her with supplying and fixing 5A.ceiling rose,necessary leng...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clam...

•

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.(PWD SR 2023-2024, V-2, Pg No-119, It No-13.14)

•

S.C.I. gully or nahani grating 100 mm dia (PWD SR 2023-2024, V-II, Pg No-A34, It No-735)

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore-Horizontal (PWD SR 2023-2024, V-2, Pg No-117, It No-13.6.1.1)

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side...

•

Providing and fixing in position Honne wood half panelled shutters at bottom and half glazed at top for window shutters with stiles and rails of 30mm. thick, 75mm wide in two halves with panels of 20m...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :125x85x5.5 mm (heavy type) (Page No.107. Iitem no.12.75.1 of Vol-2- -KPWD 2023-2024)

•

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete 100x70x4 mm (ordinary type) (Page No.107. Iitem no.12.75.4 of Vol-2- -KPWD 2023-2024)

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10mm (Page No.107. Iitem no.12.76.1 of Vol-2- -KPWD 2023-2024)

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (Page No.107. Iitem no.12.62 of Vol-2- -KPWD 2023-2024)

•

Providing and fixing door latch with necessary screws etc complete.Bright finished brass latch (Page No.108. Iitem no.12.80.1 of Vol-2- -KPWD 2023-2024)

•

Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box (Page No.05. Iitem no.1.5.3 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (Page No.09. Iitem no.3.6.9 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.16 - 32 A TP (Page No.21. Iitem no.5.46.4 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (Page No.09. Iitem no.3.6.1 of Vol-6- -KPWD 2023-2024)

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder(Page No.10. Iitem no.3.14.7 of Vol-6- -KPWD 2023-2024)

•

Supplyingof 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)(KPWD - Elec Vol-06, 2023-2024: Page No.43, Item No. 6.2.1)

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 g/...

•

Supplying and fixing PVC/metal conduit Deep junction box 32 mm deep Junction box (Page No.05. Iitem no.1.5.3 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch (Page No.09. Iitem no.3.6.1 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch (Page No.09. Iitem no.3.6.9 of Vol-6- -KPWD 2023-2024)

•

Supplying and fixing of Modular MCB Devices (Tripper) With Breaking capacity of 6kA.16 - 32 A TP (Page No.21. Iitem no.5.46.4 of Vol-6- -KPWD 2023-2024)

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.6A Batten Holder(Page No.10. Iitem no.3.14.7 of Vol-6- -KPWD 2023-2024)

•

Supplyingof 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)(KPWD - Elec Vol-06, 2023-2024: Page No.43, Item No. 6.2.1)

•

S.C.I. gully or nahani grating 100 mm dia (PWD SR 2023-2024, V-II, Pg No-A34, It No-735)

•

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 g.(PWD SR 2023-2024, V-2, Pg No-119, It No-13.14)

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore (PWD SR 2023-2024, V-2, Pg No-117, It No-13.4.2)

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) :40 mm nominal bore-Horizontal (PWD SR 2023-2024, V-2, Pg No-118, It No-13.6.3.1)

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore-Horizontal (PWD SR 2023-2024, V-2, Pg No-117, It No-13.6.1.1)

•

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.flushing cistern, including flush pipe, with manually co...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

•

Compacting Original Ground-Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankmen...

•

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...

•

Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90kg/m3 (75:25 proportion) as per approved mix design procedure and thickness as per de...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Kerb Stones Supplying and fixing M15 grade precast cement concrete Kerb

•

stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (...

•

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...

•

Supply and erection of 14 Feet Height Street Light Pole 14Feet Height Street Light Pole on suitable cement concrete foundation with 2.5Feet height dia 5mm castiron decorative round pedestalas per desi...

•

KPWD SR 2023-24, Vol-06, Pg No-46, I.No-11.8.6,LED Street light. Supply of LED Street light luminaire with pressure diecast aluminium housing body for optimal thermal dissipation.Lampcompartmentcompri...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 -6 Sqmm,...

•

Optical Fibre Cable (OFC) and its Accessories HDPE/PLB Pipe 50/42 mm (Page No.30. Iitem no.(536)66.04 of Vol-6-KPWD 2023-2024)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW 4 Bydagi 41807CALL-2-400L Buliding.docx

Tender Document • 2.35 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

BASVARAJ KUMBAR

₹3.3 Craccepted-aoc