PROVN OF STORAGE AT TECH STORE AND ADDN, ALTERATION TO BLDG NO P-133 AT MIL STN NABHA UNDER GE SOUTH PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement plastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished complete all as specified and directed. Note : Water proofing compound shall be measured and paid saparately under item .

M&L 10mm thick cement plastering in cement mortar cement mortar 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from1.5 to 2.5mm as required for desired smoothness and levelling of surfaces in two or more layers)by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

M&L prepration of new plastered or unplastered surface of walls and applying two coats of distemper oil emultion complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed

M&l for rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparing old plastered surfaces of ceilings and applying one coat of white wash in all as specified and complete all as specified and directed

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

All as per srl item No 13 here in before but n. exc 1.5 sqm each complete all as specified and directed.

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 CO) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. (Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 CO, using graded crushed stone aggregates) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )

S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified and directed.

S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium 200mm anodised , barrel tower bolt of extruded complete all as specified and directed

S&F Aluminium anodised sliding door bolt of size 250mm, stove enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts complete all as specified and as directed.

S&F Aluminium handles 125mm cast type , anodised complete all as specified and directed.

S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed.

S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed

S&F Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified and directed including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows complete all as specified and directed.

S&F Steel ventilators fixed type with glazing bars complete all as specified and directed.

S&F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mm fixed with wooden beads tinned tacks of wire staples in repair complete all as specified and directed.

M&L for preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer all as specified and directed.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed.

M&L for demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates complete all as specified and directed.

M&L for Ceramic floor tiles of minimum size 600X600 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for anti skid coloured pressed ceramic floor tiles of minimum size 300X300 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid in complete all as specified and directed.

M&L for coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (350 x450 mm)X7mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed.

S&F Built in steel cup board shutter made out pressed steel frame of size 75mmx45mmx1.25mm thick with prressed steel shutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CP hanging rod of 20mm dia with brackets fixed on inner sie of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 all as specified and directed and shown on Drg No 178 sheet 2/3 and 3/3 dt 21.06.2001.in and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed. Note:- Drag is not made part of tender document but can be seen in the office of AGE B/R.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed.

Taking up or down steel tubing of size 15mm bore complete all as specified and directed.

Taking up or down steel tubing of size 20mm bore complete all as specified and directed.

Supply and laying of 20mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

Supply and laying of 25mm outer dia CPVC pipes SDR11 & plain CPVC SDR 11 fitting fixed on wall / celling or laying in floor complete all as specified and as directed.

S&F mild steel chromium plated 20mm curtain rod with and including fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as specified & directed as in repair . (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)

S&F 18 mm thick LEAD FREE PVC celuka ply of one side white and other side wooden finish color fixed with screws, slovent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed. NOTE: The weight of ply not less than 10kg per sqm.

S&F 12 mm thick LEAD FREE PVC celuka ply of approved colour, fixed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed.

S&F 6 mm thick LEAD FREE PVC ply fixed with screwxed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed.

S&F tower bolts 150 mm long of stainless steel 304 finished/of outer plate metal matt finished complete in position complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed.

S&F paino/continuous hinge of size 30 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions all as specifed and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position all as specified and directed

S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull out type like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position all as specified and directed.

M&L for dismantling of brick tiles or terracing tiles single layar on roofs complete att as specified and directed.

M&L for demolation of mud puska and removing from roof any thickness complete all as specified and directed.

M&L for PCC 1:3:6, type B-0 using 12.5 mm graded crushed stone aggregates as in padding over roof ,minimum thickness at khurra as 50mm maintain a slope of 1:100 using water proofing compound finish even and smooth without using extra cementcomplete all as specified and directed

M&L for PCC 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates as in roof kerbs or mud stops/ coping etc including weathering slightly rounded or chamferred finish even and smooth without using extra cement all as specified and directed

M&L for the following roof treatment. (a) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed. (b) Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm. (c) Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (d) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square metre including cleaning the surfaces all as directed and specified.

S&F 30mm thick PVC door factory made solid panell shutters consisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with heat moulded plain coulour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with screws complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed.

M&L for PVC(SWR) Floor trap 75mm plain with and including CP grating jointing to wate pipe with solvent cement complete all as specified and directed.

M&L for PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iron clamps 25x3mm complete all as specified including taking out old damaged AC rain water pipes.

S&F PVC (SWR) bends of any radius for 110 mm dia for rain water pipes with rubber ring joints a complete all as specified and directed

S&F Rotational moulded polythene water storage tank ISI marked cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl demolition of exisiting Rcc tank and incl 20 mm bore ball brass valves high pressure with polythene float and fly nut complete all as specified and directed.

S&F 125mm Brass chromium plated shower rose with or without swivel joints, fixed to steel pipe complete all as specified and directed.

S&F in Repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed all as specified and directed.

S&F in Repair Pillar taps hot and cold mixture Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts scrrewed for iron pipe and fixed complete all as specified and directed..

S&F stop cock cast copper alloy chromium plated fancy type ,high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified and directed.

S&F angle stop valve(Concealed type) cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified and directed.

S&F in Repair 20mm Stop valves/ gate valve , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in Repair 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed.

S&F Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed.

S&F Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete all as specified and directed.

S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed.

S&F Viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to traps and to flushing pipe, anti syphonage pipe complete all as specified and directed..

M&L Hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface using broken stone or boulderscomplete all as directed and specified

M&L PCC (1:3:6 type C-2 using 20mm graded crushed stone aggregates), 50mm thick as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed.

M&L 20mm thick black colure granite Machine cut as in border (Patti) laid over and including cement screed 15mm thick in CM 1:4 over and jointed with gray cement slurry mixed with pigment including rubbing and polishing complete all as specified and directed.

S&F Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 25mm thick cement concrete type B-0 (12.5mm graded aggregate) complete all as specified and directed.

All as per item No 79 here in before on vertical surfaces as in skirting/dado of size as required at site but excluding 25mm thick PCC complete all as specified and directed.

S&F Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

S&F Stainless steel wall mounted kitchen dish rack plate of size 750mm X600mm X 250 mm complete all as specified and directed.

S&F PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it and fixed with screws on wall complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and directed.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 75mm bore with sand cast paper complete all as specified and directed.

S&F cast iron 100mm dice cowl with cement joints and including CP complete all as specified and directed.

S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregates complete all as specified and directed.

S&F in repair 100 mm branch pieces, double/cross, Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branch complete all as specified and as directed.

S&F CI P & S trap including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1. complete all as specified and directed.

M&L for demolition and breaking up 150mm drain pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced) and removal of debris to low lying area to a distance not exceeding 100m complete all as specified and directed.

S&F Reinforced concrete pipes, class NP2 laid and jointed complete with collars bore in pipes 150mm complete all as specified and directed

M&L for150mm bore, cement concrete bed 1:3:6 type C2, using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and complete all as specified and directed.

M&L for Excavation in trenches not exc 1.5m wide and not exc 1.5m in deep and getting out in hard / dense soil for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc complete all as specified and directed.

M&L for removing excavated material(soil) to a distance not exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M&L for PCC 1:2:4, type B1, using 20mm size graded stone agregates as in bands, copings, etc., including necessary formwork complete as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed.

M&L for demolition of brick work built in cement mortar including all quions, arches, pillers, etc complete all as specified and directed.

M&L for brick work in cement mortar 1:4 with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cemnt complete all as specified and directed.

M&L for demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and directed.

M&L for reinforcement cement concrete (Normal mix )1:2:4 Type B1 (20mm graded crushed stone aggregate) as in slab support on wall , beams and collums in floor roof landing balconies deck slab and in shelves and the like complete all as specified and directed.

S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No 104 but 5mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

S&f Coolar stand Joist, channel, angle, or tee sections, fixed independently, without connecting plates, conforming to Fe 410-W (Gde-E-250) quality -A complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe 290(Gde-F-165) complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L PCC 1:4:8, type D-2 using 40mm graded stone aggregate, as in foundation etc. complete all as specified and directed.

M&L 40mm thick 1.2.4 type B-0 Damp proof course to horizontal or vertical surfaces including necessary formwork compleate all as specifiede and directed.

S&F Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glaged and gauged skelton shutters jointed interally with flat iron 40x4mm complete including grill of 8mm square bar, fixed horrizontally @ 10cm centre to centre, hinges, handle tower bolts,lugs etc all as shown on drawing noTD-219 (c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete all as specified and directed.(Note;- (i)for the purpose of measurement& payment double shuttre with frame shall be considered as one unit.)

M&L for Reinforced cement concrete (Normal Mix),Type B1, 1:2:4 using 20 mm graded crushed stone aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, Footings complete all as specified and directed.

M&L for Reinforced cement concrete (Normal Mix),Type B1, 1:2:4 using 20 mm graded crushed stone aggregate Chajjas on walls, beams lintel beam, roof beam , landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

Use & waste of formwork to sides and soffits of floor, column , roof beams ,lintels beam ,cantilevers ,shelves including supports ,overhangs and similar work , for rough finished flat surfaces complete all as specified and directed.

S&F Form work to sides of slab not exc 20cm wide for rough finish surface complete all as specified.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base,complete all as specified and directed.

M&L 100 mm thick (1:2:4) Type B-1, Plain cement concrete with using 20mm graded crushed aggregate as in hard standing etc finished with without using extra cement , complete all as specified and directed.

S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws as specified

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

M&L for rectangle / Square /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Grade YST 310 complete all as specified and directed. NOTE : (The rates shall inclusive of getting the truss designed by Thapar Engineering College, Patiala) or any Government approved college based on the span of 6 mtr and shall provide the design calculation done by Engineer-in-charge)

S&F mild steel plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings light fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) Necessity cutting chasing where ever required shall be part of job & making good the disturbed surfaces shall be part of job.

All as per item No 126 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed.

All as per item No 126 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed.

All as per serial item No 126 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed.

M&L for Modular switch 1 way 6A, 1 module type complete all as specified and directed.

M&L for Modular switch 1 way 16A, 1 module type complete all as specified and directed.

M&L for Modular Socket, 6A - 5 pin 2 module type complete all as specified and directed.

M&L for Modular Socket 6A/16A - 2/3 pin or 5 pin 2 module type complete all as specified and directed.

Supply and Fixing LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and directed.

Supply & fix of LED 10 Watt, 2 feet long, Cool day light with NEO Batten10 W 6500K having high efficiency Cat No. LHEXACP7IN1W010. Make -Havells. incl necessary electric conection complete all as specified and directed.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed.

Material and labour for lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts complete all as specified and directed.

Supply and fix LED Lamp 9W Warm White Ball Lamp complete all as specified and directed.

Supply and fix LED Lamp 15W Warm White Ball Lamp complete all as specified and directed.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires 230 Volts including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and directed.

Material and labour for Modular Bell push 6A 1 module complete all as specified and directed.

M & L for Fan step regulator, 120W - 1 module complete all as specified and directed.

S & F Energy saving Ceiling Fan BEE 5 star rating complete with accessories AC single phase 230V, 1200 mm sweep all as directed\ (Note:-Unsv C/Fan will be deposted to MES office).

S & F Exhaust fan 300 mm sweep, metal body type AC single phase 240 V with louver complete all as specified and directed. Note : Fixing of exhaust Fan on wall with suitable size anchor bolt , cutting wall for making hole suitable for 300 mm sweep exhaust fan, grouting and making good the disturbed surface shall be part of job at no extra cost. complete all as specified and directed.

S & F Ventilation 230 mm sweep, metal PVC body, AC single phase 230 V with PVC louver. Note : Fixing of Ventilation Fan on wall with suitable size anchor bolt , cutting wall for making hole suitable for 250 mm sweep Ventilation fan, grouting and making good the disturbed surface shall be part of job at no extra cost. complete all as specified and directed. (Note:-Unsv Ventilation Fan will be deposted to MES office.

S&F Wall mounted fan 450 mm sweep, 18 Inch, 1440 rpm metal body, 240 volts, energy efficent as per latest specifications complete all as specified and directed.

M&L for making hole for fixing of ventilation/Exhaust fan of size 230 mm sweep with louvers complete all as specified and directed.

Supply and fixing Vertical load line type TPN DB, 4 way 415 V, double door as per IS - 8623, IP-54 protection, universal mounting with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for accomodate MCCB TPN 100 Amp as incomer and TP&SP MCCB/MCBs as outgoing complete & making necessary electrical connection for incoming and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed. Note: (i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing shall be part of job.

Supply and fixing Vertical load line type TPN DB, 8 way 415 V, double door as per IS - 8623, IP-54 protection, universal mounting with suitable capacity copper bus bar with nuetral bus bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for accomodate MCCB TPN 100 Amp as incomer and TP&SP MCCB/MCBs as outgoing complete & making necessary electrical connection for incoming and outgoing cables, with copper lugs, crimpped with crimping tool complete all as specified and directed. Note: (i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) The disturbed surface shall be match with existing shall be part of job.

S&F in replacement of existing MCCB TPN, 63 Amps, 415 volts, 16 KA complete fixing in DBs including proper thimbles connections all as specified and directed.

S&F in replacement of existing MCCB TPN, 100 Amps, 415 volts, 16 KA complete fixing in DBs including proper thimbles connections all as specified and directed.

S & F SPN DB suitable for MCBs of single pole and neutral 8 Way as per IS - 8623, IP-54 protection,double door type with 200 amp rated bus bar complete all as specified and directed.. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. (ii) Dismantling of existing sheet metal box will be deposited to MES. (iii) Masonry work to fill the space of iron sheet box will be part of the job. (iv) Energy Meter will be refixed & connected after fixing of new DB. (v) MCB'S shall be fixed with copper wires FRLS 1.5/2.5 Sqmm incl appropriate size of brass/Cooper thimbles.

Supply and fix in replacement of MCB SP up to 6-32 Amp complete all as specified and directed.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and directed.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x4 sqmm ( line conductor) & 1x4 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm ( line conductor) & 1x6 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size. (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. All as specified and directed.

S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with suitable dia light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.

S&F Single Phase PVC Junction box suitable for mounting on LT RCC pole of 9 mtr long, box having Al busbar 20 Amp rating with 6 Amp MCB ('B' series) control, mounted on insulators with 2 clamps of copper strip for earthing of the armoured of the cable complete with making holes for connecting cables etc nuts bolts etc front openable hinged cover suitable for mounting on steel clamps nut bolt etc pvc adopters and PVC hose pipe upto cable treench for incoming and outgoing cables, factory made duly painted with powder coating process completeed as specified and directed.

M & L for fixing of GI pipe(light grade) bracket of 25 mm dia size of 1.2 mtr long bent to shape for fixing of LED street light fittings including fixing with steel clamps and accessories etc complete all as specified and directed.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x1.5 sqmm ( line conductor) & 1x1.5 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size. (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

S&F Geyser (water heater) vertical storage type 240 volts, 2000 Watt, BEE rating, 5 Star , water proof IPX-4 Pprotection having adjustable knob for temperature settings, copper cell of 25 Ltr capacity incl cost of anchoring arrangement (nut & bolts) to the wall, corded copper electric cable etc all as specified and directed.

Supply & Fix in replacement of PVC Conduit of size 15 mm incl all connected accessories (bends, clamps, PVC union & screws etc) for existing wiring complete all as specified and directed.

S & F Single pole and neutral enclosure with a two pin and earth plug and socket 240 volts complete with one single pole MCB 20 Amps suitable for 1.5 TR AC complete all as specified and directed.

Supply, laying, Jointing connecting in replacement of existing multijointed OH conductor into LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 4 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

Supply and fixing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm, 3.5 core laid in trenches /on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified. Note : Only punned sand shall be measured and paid.

Supply and laying GI tube 40 mm light grade as in cable protection pipe including all fittings & taking down / taking out from trench complete all as directed.

M&L for laying of well burnt Brick 23 cm x11.5 cm x7.5 cm for cable protection complete all as specified and directed.

RINKU BROTHERS (BID ID -3094114)

LM CONSTRUCTIONS (BID ID -3086503)

M/S RAJ KUMAR GUPTA (BID ID -3082089)

m/s k.k. construction co. (BID ID -3085777)