Construction of ACR at Higher Secondary School Martyr Dy. S.P. Gulbadan Singh Bhau Under Samagra Shiksha-2025-26 (Ist Call)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

P/Laying of cement conct. 1:5:10 Of specified grade excluding the cost of form work, cement using 40mm N/ size of agg.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) crushed

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

P/Laying of cement conct. 1:2:4 Of specified grade excluding the cost of form work, cement using 20mm N/ size of agg All work upto plinth level

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). crushed

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with brick of class designation 75 above plinth level upto floor V level in cement mortar 1:6

Extra for brick work with common burnt clay brick/cement concrete brick in super structure above plinth level upto floor five level

FILLING AVAILABLE EXCAVATED EARTH IN TRENCHES , PLINTH, SIDES OF FOUNDATION LAYERS NOT EXCEEDING 20 CM IN DEPT , CONSOLODATING EACH LAYER BT RAMMING AND WATERING

supply and filling in plinth with fine sand under floors including watering ramming consolidating and dressing complete

Centring and Shuttering including strutting, propping etc and removal of form work for Foundations, footings, bases for columns.

Centring and Shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams,girders, bressumers and centilevers.

Centring and Shuttering including strutting, propping etc and removal of form work Suspended floors, roofs, landings, balconies and access platform

Centring and Shuttering including strutting, propping etc and removal of form work Columns, pillars, piers, abutments, posts and struts

Centring and Shuttering including strutting, propping etc and removal of form work for Edges of slabs and breaks in floors and walls.Under 20cms wide

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in railing

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30mm

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1Okg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges, second class deodar wood 30 mm thick

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63mm for doors, windows and clerestory windows with hinges and necessary screws, second class deodar wood

200x10 mm Aluminium tower bolts

100x10 mm Aluminium tower bolts

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm handles

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.100 mm handles

100 mm hooks and eyes

Providing and fixing ISI marked 85 mm x 42 mm oxidized M.S. pull bolt lock conforming to IS: 7534 with necessary screws, bolts, nut and washers etc. complete.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand over a priming coat red oxide on new steel work two or more coats

Providing/laying 12 mm cement plaster of mix 1:4 fine sand

Providing 15 mm cement plaster of mix 1:6 fine sand

6 mm cement plaster to celling of mix 1:3 fine sand

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade on two or more coat on new work

Providing and applying white cement based putty of specified thicknessof approved brand and manufacturing over the plastered surface wall surface to prepare the surface even and smooth complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishingthe top smooth and curing complete

Wiring for light points, fan point ,exhaust fan point,call bell pointwith 1.5sqm FRLS PVC insulated copper conductor single core cablesin surface/recessed medium class PVC conduit,with piano typeswitch phenolic laminated sheets,suitable size MS bOx with earthing the pointswith 1.5sqm FRLS PVC insulated copper conducted single core cables etc.

Providing and installation of Ceiling Fan

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Re-lettering with black Japan paint of approved brand and manufacture.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Carriage of material with in avg. Lead from source to site of work Sand 10 KM by M.T

Carriage of material with in avg. Lead from source to site of work Agg. 10 KM by M.T

Seventeen Lakh Forty Five Thousand Nine Hundred & Ninety Nine and Paise Thirty Seven Only