Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.3 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹32.6 L+₹25,100 (0.78%)Rejected-Finance | L2 | Rejected-Finance Being Not Lowest | |
| 3 | L3₹37.5 L+₹5.1 L (15.8%)Rejected-Finance 0 0 BASANT AVENUE PHASE II PUNJAB GURDASPUR PUNJAB 143505 | GURDASPUR | PUNJAB | 143505 | L3 | Rejected-Finance Being Not Lowest | |
| 4 | L4₹38.5 L+₹6.1 L (18.9%)Rejected-Finance | L4 | Rejected-Finance Being Not Lowest | |
| 5 | L5₹43.1 L+₹10.8 L (33.4%)Rejected-Finance LOHIA NAGAR WARD NO 14 CHANDAULI UP 232104 | CHANDAULI | CHANDAULI | UP | 232104 | L5 | Rejected-Finance Being Not Lowest |
| Sl No | Description | Qty | Unit | MS JAGDAMBA ENTERPRISES L1 | M/S SAMRAT TRADING AGENCY L4 | PAPPU ROY CONSTRUCTION L8 | M/S Rohit Enterprises L6 | VIJAY ENTERPRISES L3 | RKT ENGINEER & SONS L5 | M/S SHEO KUMAR SINGH AND SONS L2 | M/s SKP CONSTRUCTION L7 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for preparing of existing construction/dummy joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 10 to 15 mm wide and 25 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed.
Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land. | 380 | Ten RM | 1,450 ₹5,51,000 | 2,050 ₹7,79,000 | 350 ₹1,33,000 Lowest | 2,000 ₹7,60,000 | 2,025 ₹7,69,500 | 2,150 ₹8,17,000 | 1,400 ₹5,32,000 | 1,999 ₹7,59,620 |
| 2.00 | M&L for preparing of existing construction/dummy joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 15 to 20 mm wide and 25 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed.
Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land. | 410 | Ten RM | 1,650 ₹6,76,500 | 2,550 ₹10,45,500 | 350 ₹1,43,500 Lowest | 2,200 ₹9,02,000 | 1,990 ₹8,15,900 | 3,100 ₹12,71,000 | 1,700 ₹6,97,000 | 1,999 ₹8,19,590 |
| 3.00 | M&L for preparing of existing expansion joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 25 to 30 mm wide and 30 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed.
Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land. | 100 | Ten RM | 1,800 ₹1,80,000 | 2,875 ₹2,87,500 | 350 ₹35,000 Lowest | 3,000 ₹3,00,000 | 3,000 ₹3,00,000 | 7,100 ₹7,10,000 | 1,900 ₹1,90,000 | 2,999 ₹2,99,900 |
| 4.00 | M&L for repair to broken/damage portion of concrete slab or pavement by cutting damaged portion of slab/spoiled edges to triangular/rectangular cross section with mechanical cutter and removing all loose and foreign materials and deposing the same to a distance exceeding 150m and not exceeding 250m and cleaning the surface by compressed air to remove all dust dirt etc and washing with hydrochloric acid and filling epoxy resin mortar after application of epoxy primer as per manufacture instructions with bull nosing the edges complete all as specified and directed. | 300 | 1000 CUCM | 280 ₹84,000 | 270 ₹81,000 Lowest | 550 ₹1,65,000 | 750 ₹2,25,000 | 310 ₹93,000 | 509 ₹1,52,700 | 300 ₹90,000 | 999 ₹2,99,700 |
| 5.00 | Cutting of exisiting runway/taxi track cracks and spalled edges by mechanical tools, making grooves at edges, cleaning through air blower and applying propriety primer on the cleaned surfaces to obtain tacked surface and finally filling elastomeric concrete of make as specifed by mixing part A, Part B and adding fiberglass sand (all as per manufacturer's instruction) to obtsin a homogenous mix and finally tooling the surface with har tools obtain grroved textured finish complete all as specified and directed.
Note:
(i) The rate shall include for providing masking tape at the joints and fdormwork required if any at spalled edges.
(ii) The quoted rate deemed to include for maiking good the disturbed joint filling around the area where material is applied.
(iii) All material shall only be procured directly from the manufacturer. | 1,010 | 1000 CUCM | 1,090 ₹11,00,900 | 995 ₹10,04,950 | 2,200 ₹22,22,000 | 1,400 ₹14,14,000 | 1,099 ₹11,09,990 | 700 ₹7,07,000 Lowest | 1,100 ₹11,11,000 | 1,499 ₹15,13,990 |
| 6.00 | M&L for applying one coat of aqua based runway / road marking paint golden yellow or white colour as approved to give uniform finish including preparation of old painted surfaces of runway/ taxi track / dispersal for painting lines, dashes, arrows, letters and the like exceeding 10cm wide or girth complete all as specified and directed. | 8,000 | Sqm | 60 ₹4,80,000 | 58 ₹4,64,000 Lowest | 200 ₹16,00,000 | 69.5 ₹5,56,000 | 64 ₹5,12,000 | 60 ₹4,80,000 | 58 ₹4,64,000 Lowest | 100 ₹8,00,000 |
| 7.00 | M&L for applying one coat of aqua based runway / road marking paint golden yellow or white colour as approved to give uniform finish including preparation of old painted surfaces of runway/ taxi track / dispersal for painting lines, dashes, arrows, letters and the like not exceeding 10cm wide or girth complete all as specified and directed.
Note for item No 6 & 7: Masking tape shall be used on edges of paint before painting and removing the same after paint is applied wherever required and as directed. | 2,700 | Ten RM | 60 ₹1,62,000 | 68 ₹1,83,600 | 200 ₹5,40,000 | 90 ₹2,43,000 | 54 ₹1,45,800 Lowest | 65 ₹1,75,500 | 65 ₹1,75,500 | 77 ₹2,07,900 |
Tender Value
₹55 L
EMD Value
₹1.1 L
Closing Date
1 Sept 2025, 6:00 pmClosed
CWE (AF) BAMRAULI
HQ CWE (AF) BAMRAULI, PRAYAGRAJ-211012
REPAIR/MAINTENANCE OF JOINT FILLING, PQC REPAIR AND PAINTING AT AF STN BIHTA
2025_MES_723005_1
87521/E8
Open Tender
Civil Works
Item Rate
273 days
BIHTA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹1,000
GE (AF) BIHTA
₹1.1 L
Yes
15 Sept 2025
28 Jul 2025
3 Sept 2025
28 Jul 2025
1 Sept 2025
18 Aug 2025
28 Jul 2025 - 4 Aug 2025
Amount
M&L for preparing of existing construction/dummy joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 10 to 15 mm wide and 25 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed. Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land.
M&L for preparing of existing construction/dummy joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 15 to 20 mm wide and 25 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed. Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land.
M&L for preparing of existing expansion joints including removing filled material in joints of runway / taxi track by removing the cracking out joints 25 to 30 mm wide and 30 mm deep including removing all loose material, cleaning the joints with brush and removing all loose fine particles with compressed air, and providing a suitable dia polyurethane back up rod/debonding strip and top 13mm primed and sealed with using polyurethane based sealing compound with suitable primer as per BS-4254 and EN 141875-2003 (for hydrolysis / water resistance test) priming the sides with minimum MAF± 30 %, with ten years performance guarantee and applying masking tape on edges of joint to prevent accidental spillage of sealent and removing the masking tape after sealent is applied complete all as specified and directed. Note: Old unserviceable material so obtain from remval of exisiting filled up materials shall be disposed off outside MoD land.
M&L for repair to broken/damage portion of concrete slab or pavement by cutting damaged portion of slab/spoiled edges to triangular/rectangular cross section with mechanical cutter and removing all loose and foreign materials and deposing the same to a distance exceeding 150m and not exceeding 250m and cleaning the surface by compressed air to remove all dust dirt etc and washing with hydrochloric acid and filling epoxy resin mortar after application of epoxy primer as per manufacture instructions with bull nosing the edges complete all as specified and directed.
Cutting of exisiting runway/taxi track cracks and spalled edges by mechanical tools, making grooves at edges, cleaning through air blower and applying propriety primer on the cleaned surfaces to obtain tacked surface and finally filling elastomeric concrete of make as specifed by mixing part A, Part B and adding fiberglass sand (all as per manufacturer's instruction) to obtsin a homogenous mix and finally tooling the surface with har tools obtain grroved textured finish complete all as specified and directed. Note: (i) The rate shall include for providing masking tape at the joints and fdormwork required if any at spalled edges. (ii) The quoted rate deemed to include for maiking good the disturbed joint filling around the area where material is applied. (iii) All material shall only be procured directly from the manufacturer.
M&L for applying one coat of aqua based runway / road marking paint golden yellow or white colour as approved to give uniform finish including preparation of old painted surfaces of runway/ taxi track / dispersal for painting lines, dashes, arrows, letters and the like exceeding 10cm wide or girth complete all as specified and directed.
M&L for applying one coat of aqua based runway / road marking paint golden yellow or white colour as approved to give uniform finish including preparation of old painted surfaces of runway/ taxi track / dispersal for painting lines, dashes, arrows, letters and the like not exceeding 10cm wide or girth complete all as specified and directed. Note for item No 6 & 7: Masking tape shall be used on edges of paint before painting and removing the same after paint is applied wherever required and as directed.
M/S SHEO KUMAR SINGH AND SONS (BID ID -3399680)
VIJAY ENTERPRISES (BID ID -3412899)
M/S SAMRAT TRADING AGENCY (BID ID -3404887)
RKT ENGINEER & SONS (BID ID -3405361)
M/S Rohit Enterprises (BID ID -3413414)
M/s SKP CONSTRUCTION (BID ID -3412332)
PAPPU ROY CONSTRUCTION (BID ID -3412989)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .