Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-AOC | L1 | Accepted-AOC FIRST LOWEST BODDER | |
| 2 | L2₹49.7 L+₹6.3 L (14.5%)Rejected-AOC SHAKTI NAGAR UDHAMPUR TEH DISTT UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-AOC SECOND LOWEST BODDER |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
11 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208 c/o 56 APO
REPAIRS AND RESTORATION TO VARIOUS TYPES OF STEEL BEDS WOODEN BEDS CHARPOY IP HARD TOP AND CHARPOY FOLDING UNDER GE NAGROTA
2023_MES_588812_1
GEN-03/2023-24
Open Tender
Civil Works
Works
180 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
₹99,600
Yes
28 Jun 2023
10 Apr 2023
18 May 2023
10 Apr 2023
11 May 2023
24 Apr 2023
Amount
Removing the mentioned unserviceable/broken components of wooden furniture without damaging the adjacent parts.Supply and fixing following new component duly as per mentioned size and shape shown on drg in the existing place with standard workmanship to make the item complete in all manner.The work shall be executed in BS Yard or at any site/unit as directed by GE/Engr-in-Charge:-
REPAIR TO BED PLY WOOD TOP (FD-246)
Removing of old unserviceable long rail,supply and fixing new long rail; made of teak wood ,fitted to footboard and head board by tongue and groove joint using adhesive and nails. complete all as shown on drawing and as specified .
Removing of old unserviceable headboard,supply and fixing new head board, made of teak wood battens,teak wood legs,teak wood rails including 4mm thick teak ply on both sides with 12mm dia half cut beading. complete all as shown on drawing and as specified .
Removing unserviceable 4mm thick teak ply from headboard including 12 mm dia half cut teak wood beading ,supply and fixing new 4mm thick teak ply in position duly fixed with adhesive and headless nails with all edges completely covered with 12 mm dia half cut teak wood beading by using adhesive and headless nails,complete all as shown on drawing and as specified .
Removing of old unserviceable footboard,supply and fixing new footboard ,made of teak wood battens,teak wood legs,teak wood rails including 4mm thick teak ply on both sides with 12mm dia half cut beading. complete all as shown on drawing and as specified .
Removing of old unserviceable 4mm thick teak ply from footboard including 12 mm dia half cut teak wood beading ,supply and fixing new 4mm thick teak ply in position duly fixed with adhesive and headless nails with all edges completely covered with 12 mm dia half cut teak wood beading by using adhesive and headless nails,complete all as shown on drawing and as specified .
Removing of old unserviceable Stiffners,supply and fixing new stiffeners of size 900mmx40mmx60mm made of 1st class teak wood ,complete all as shown on drg and as specified
Removing of old unserviceable leg from head board .Supply and fixing new leg made to shape and size 660mmx60mmx60mm,Complete all as directed and shown on drg.
Removing of old unserviceable leg from foot board.Supply and fixing new leg made to shape and size 500mmx60mmx60mm,Complete all as directed and shown on drg.
Removing of old unserviceable ply top,supply and fixing in position with new top of 12mm thick plywood BWP grade-AA conforming to IS-710 of size 1980mmx900mm with 12 x Nos of 40mm long countersunk wood screw.complete all as specified and as directed. Make- National/Century/Greenply
Removing of old unserviceable wooden bracket,Supply and fixing in position new wooden corner bracket of size 100mm x 100mm of thickness duly fixed with adhesive and counter sunk wood screw complete all as specified on drg and as directed.
Polishing to bed ply top with french polish of approved grade and brand by spray machine only after cleaning, dusting and scratching the entire wooden suface with sand emery paper of required grade and hand held grinder, filling putty to the bore holes, making the surface smooth by sanding and grinding with standard workmanship all as directed by Engineer-in-charge and as specified. The polishing shall be carried out after making the article intact by tightening all parts and carrying out anti termite and anti bug treatment complete all as specified and as directed
REPAIR TO BED PLY STEEL TOP (FD/E6/MAP/08(R)
Removing of old unserviceable PVC Shoes,Supply and fixing new High quality hard PVC shoes of size 38mm x 38mm,Complete all as specified and showin in drg.
Removing of old unserviceable prelaminated MDF board from head board ,Supply and fixing in position with new cut piece at head board of size 638mm x 201mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw.complete all as specified and shown on drg.
Removing of old unserviceable prelaminated MDF board from foot board,Supply and fixing in position with new cut piece at foot board of size 638mmx314mm made of 18mm thick prelaminated MDF board with 2mm thick PVC beading alround its edges duly fixed with suitable wooden screw .complete all as specified and shown on drg.
Removing of old unserviceable ply top,Supply and fixing in position with new top of 12mm thick Plywood BWP grade -AA conforming to IS-710 of size 1974mm x 824mm duly fixed with 12 x Nos of 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg. Make- National/Century/Greenply
Painting the frame of the Bed Ply Top Steel with one coat of dark Grey hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth. The Bed Ply Top Steel frame shall be made smooth by applying metal putty on etched surface only where required complete all as specified on drg and as directed
CHARPOY GI PIPE WITH PLY TOP,FD-220/220(R):-
Taking out existing unserviceable /broken plywood from the charpoy GI pipe by unscrewing nut,bolt ,washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and Supply and fixing new 12mm thick plywood BWP grade-AA made of wood and other lignocellulosic products conforming to IS-710 of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply ,flat iron and rail )with new GI nylon insert nut, bolt and washers 8mm dia 62 to 65mm long as directed by Engr-in Charge and all as specified.
CHARPOY IP HARD TOP,FD/MAP-II/01
Removing of old unserviceable Top ,Supply and fixing new top made of 12mm thick BWP Plywood grade-AA of size 1980mmx900mm fixed 12x Nos of 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg.Make- National/Century/Greenply
Removing old broken unserviceable stiffeners,Supply and fixing new MS Square tube stiffener of size 25mmx25mm of 18 Guage duly fixed in charpoy through welding in position as shown in drg.complete all as shown on drg and as directed
Painting charpoy with one coat of Dark Grey hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.
CHARPOY GI PIPE WITH NYLON NIWAR FD-220
Taking out existing unserviceable plastic/nylon niwar from the frame of charpoy GI pipe.Tightening each part of the entire frame of charpoy by using pipe wrench ,Supply and fixing of 02 Nos MS flat Iron of size 32mm x 5 mm duly painted in black colour of length equal to width of plywood/GI charpoy.Drilling holes 02 Nos each in long rails,02 nos each in short rails & 01 nos on both flat iron at centre .Supply and fixing 12mm thick BWP plywood ISI marked of grade AA made of wood and other lignocellulosic products conforming to IS-710 of size 1980mm x 900mm fixed over the GI pipe frame by fixing 3 components(i.e- ply ,flat iron and rail )with nylon inserts lock nut and flat head bolt of length 70 to 75mm and dia 8mm with washers as directed by GE/Engr-In Charge.Make- National/Century/Greenply
Removing existing unserviceable/short lengthed long rail of charpoy GI Pipe.Supply and fixing new GI pipe long rail of length 1890mm including threading at both ends upto 22mm.The GI pipe shall be of medium grade having internal dia not less than 32mm and it should be ISI marked confirming to IS-1239.complete all as specified and shown on drawing.Make of GI Pipe- TATA/Jindal/Prakash Surya.
Material and Labour for making Short Rail out of unserviceable long rails retrieved from Sr Item No above after cutting the broken ends threads and making new threads on both ends upto 22mm and fixing the same to charpoy GI pipe.The complete length of each short rail including threading should be 810mm.Complete all as specified and shown on drawing
Material and Labour for making Leg out of unserviceable short rails retrieved from Sr Item No above after cutting the broken ends threads and making new threads on one end only upto 22mm and fixing hard wood plug on other end made out of 35mmx35mmx40mm with height 15mm. The length of each leg including threading and excluding wooden plug should be 380mm.Complete all as specified and shown on drawing.
Removing existing unserviceable/short lengthed LEG from the charpoy by unscrewing ,Supply and fixing new GI pipe leg of length 380mm including threading at one end upto 22mm and fixing hard wood plug on other end made out of 35mmx35mmx40mm with height 15mm.The GI pipe leg shall be of medium grade having internal dia not less than 32mm and it should be ISI marked confirming to IS-1239.complete all as specified and shown on drawing. Make of GI Pipe- TATA/Jindal/Prakash Surya.
Removing existing unserviceable/broken three way 32mm dia GI Elbow from charpoy GI Pipe by unscrewing.. Supply and fixing new three way GI Elbow for 32 mm internal dia GI pipe duly ISI marked.complete all as specified and shown on drawing.Make-UNIK / KIRTI / NEW.
Removing existing unserviceable/broken 32mm dia GI checknut from charpoy GI Pipe by unscrewing . Supply and fixing new GI checknut for 32mm internal dia GI pipe having thickness not less than 13mm ISI marked.complete all as specified and shown on drawing.Make-UNIK / KIRTI / NEW.
CHARPOY FOLDING IP HARD TOP, FD-388[R]
Removing of old unserviceable top by unscrewing ,Supply and fixing new top made of 8mm thick BWP Plywood grade-AA conforming to IS-710 of size 1880mmx900mm duly fixed in position with 50mm long 8mm dia flat head nut , bolts and washers. complete all as specified and shown on drg.Make- National/Century/Greenply
Removing the old unserviceable MS conduit pipe stiffeners,Supply and fixing new MS conduit pipe stiffeners of 25mm dia of 18 guage to charpoy through welding. complete all as specified and shown on drg.
Removing of old unserviceable PVC shoes,Supply and fixing new best quality PVC shoes of dia 25mm and height 30mm shall be provided to legs of charpoy.complete all as specified and shown on drg.
Painting the charpoy folding with one coat of Dark Grey hammer tone paint with spray machine of approved quality after preparation of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.
BED WDN BOX TYPE ,TP
Removing of old unserviceable long sides of bed,Supply and fixing new sides of size 2010mmx260mm made of 18mm thick prelaminated MDF board with 4mm thick teak wood beading at all edges duly fixed to wooden legs in side grooves with countersunk wood screw complete all as specified on drg and as directed.
Removing of old unserviceable short sides of bed,Supply and fixing new sides of size 860mmx260mm made of 18mm thick prelaminated MDF board with 4mm thick teak wood beading at all edges duly fixed to wooden legs in side grooves with countersunk wood screw complete all as specified on drg and as directed.
Removing of old unservcieable legs,Supply and fixing new legs made in shape out of 70mmx70mm teak wood fixed win position to side walls of bed,Complete all as diertced and shown on drg.
Removing of old unserviceable top,Supply and fixing with Plywood 12 mm thick BWP ISI marked of size 2050mm x 900mm with 12 x Nos of 50mm long countersunk wooden screws. complete all as specified on drg and as directed.Make- National/Century/Greenply
Removing of old unserviceable wooden stifferners ,Supply and fixing with new wooden stiffeners of size 40mmx50mm.Complete all as specified on drg and as directed.
Polishing the bed with one coat of french polish at wooden parts with spray machine of approved quality after preparation of surface by sanding with sand emery paper and dusting the surface with clean cloth complete all as specified and as directed.
VEE KAY IND
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .