NITNo24ItemNo8

Repair/Replacement of existing sign board and fixing the retro reflected board with steel structure frame for Various Sewerage pumping station and other miscellaneous mechanical works at Adarsh Nagar SPS. Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) cum

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge In cement mortar cum

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge All kinds of soil cum

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg

13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work sqm

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC: 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage sqm

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes kg

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: :1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum

Repairing/ Replacement of of 100 mm dia and 250 mm dia MS Pipe Line Laying with allied Mechanical works at Adarsh Nagar SPS. Supply of 100 mm dia 4.5 mm thick M.S. pipe 5 mtrlong confirming to IS : 1239 Make :- As approved make DJB

Supply of 250 mm dia 5 mm thick M.S. pipe 5 mtr long confirming to IS : 1239 Make :- As approved make DJB

Supply of 100 mm daia DI Double flanged Sluice valve manual operated PN 1.6 (SOR Item Code-4.40.4) Make as per Approved make DJB

Supply of DI TP Kinetic Air Valve PN 1.6 (SOR Item Code-4.41.4) Make as per Approved make DJB(100 mm dia)

Hire charge of mechanical excavator for excavation of earth pit at site of work as per site requirement and refilling the same after completion of work, including diesel, mobile oil & lubricants etc as per site requirement. (DSR- 0020)

Refilling of fire extinguisher CO2 type of given capacity 450 Kg. (SOR Item Code-24.3.3)

Fixing of 100 mm and 250 mm dia MS Pipe and fixing of sluice valve and Air valve as per given above details with the help of fitter, welder, cutter, helper and supervisor, cutter set, oxygen cylinder, LPG cylinder, welding rod and other T&P required at site of work along with all safety material to ensure safe working at site & the safety of men & material at site of work and Testing and commissioning of rising main on full pressure and as per satisfaction of Engineer In-charge.

kanha Associates