Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹21.6 L
EMD Value
₹43,113
Closing Date
24 May 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Avionics Division, Hyderabad
Avionics Division, Hyderabad
Civil works for up gradation of community Hall in HAL township area
7247
HAL/HD/CE/T/24-25/5
Works
Accessories Complex- Avionics Divn-Hyderabad-Plant Maintenance
₹0
₹43,113
24 May 2024
3 May 2024
3 May 2024
24 May 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
GST NO.:
PAN No.:
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.
TURN OVER IN Rupees
Pls Enter Turn over in Rs. for all the 3 years
ESI & PF Nos with proof (If any)
Related Document to be Uploaded to e-Procurement Portal
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
80% (One Work)
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
Pls Accept The Delarication
DECLARATION II
Pls Accept the Delaration II
Applicable Cost Index:20%
Description of item
Providing and fixing 300x 450mm size Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of NITCO/KAJARIA/JOHNSON or equivalent make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as per directions of EIC.
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane of Dr fixit/STP make, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/ 250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.
Supplying and Painting on new surfaces with Two coats of aluminium paint of asian/berger make to give an even shade complete as per directions of EIC
Dismantling old plaster or skirting including scafolding charges, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete as per directions of EIC
Plastering internal/external walls, R.C.C work etc., with C.M 1:6, 20 mm thick trowelled to even and smooth finishing including cost of all materials, labour, tools, curing etc. at all heights complete as directed, approved and specified by EIC.
Finishing walls by painting with two coats of water proofing cement paint of asian paints/berger make, required shade (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat complete as per directions of EIC
Providing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete with rates including cost of all materials, labour, curing, scaffolding,etc.all as directed and approved by EIC.
Providing and laying 600 x 600 mm Glazed Vitrified tiles Matt/Antiskid finish of NITCO/KAJARIA/ JOHNSON (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade.
Dismantling existing 100mm dia PVC / C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead
Providing and fixing on wall face, floors etc., 110 mm dia unplasticised Rigid PVC rain water pipes/drainage pipes of PRINCE/SUDHAKAR make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/ shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, ater/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.
Demolishing R.C.C. work including cutting reinforcement bars by mechanical means and stockpiling at designated locations and disposal including including stacking of steel bars and disposal of unserviceable material carriage of materials by mechanical transport including loading,unloading dismantled materials up to a lead of 2 kilometre, stacking serviceable material separately complete with rates including cost of all labour, charges for mechanical means,fuel,leads,lifts etc., all complete as directed and approved by EIC.
Providing & fixing 2mm thick UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
Providing and constructing brick work with best locally available common burnt clay bricks in CM 1:6 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.
Earthwork excavation by mechanical means (Hydraulic excavator) / manual means for ,foundations, trenches etc., not exceeding 1.50 m in width and depth in all kinds of soils including bailing of water, if necessary, dressing of sides, shoring, benching, levelling and ramming the bottom of trenches and disposing excess excavated soil as directed and to be levelled by breaking clods, if any and neatly dressed) within a lead of 50m, etc., all complete as per specifications and as directed by EIC.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including cost of tools, transportation etc., all as specified and directed by the EIC.
Supplying and fixing in trenches to proper level gradient and alignment, 150 mm dia glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) and jointing including testing of joints etc. complete including making connection to the existing man holes wherever required cost of all material labor except cost of earth work (excavation and back filling will be paid separately).
Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular)bricks of class designation 7.5
S&F 110 mm dia PVC plain / plug bend or offset of Finolex / approved quality and make with air tight cement caulked / PVC cement solvent joints testing for leakages cutting/making openings in brick masonary / CRS masonry wall RCC, PCC etc for taking out the pipes and making good with CM including cost of all material labour wastages etc at all heights as directed and approved by EIC.
Supplying and fixing 0.5 HP single phase open well submersible pump of Havells/Vguard make with nonreturnable valve with rates including cost of materials, labour, tools, transportation, leads etc., complete as approved, specified and directed by EIC.
Supplying and fixing 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for GI pipe of ZOLOTO or any approved make all as per directions of EIC
Supplying and fixing 15mm dia GI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes including painting with anti corrosive bitumastic paint, and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.
Supplying and fixing 20 mm dia GI pipe B class of TATA / ZENITH make with G.I assorted fittings at all heights complying to IS 1239 and fixing in masonry with holder bat clamps chasing in the brick walls and embeddeing the G.I pipes including painting with anti corrosive bitumastic paint, and covering the same with CM 1:6 including cutting holes in any walls or PCC slab all as directed by EIC including all labour charges cost of all materials and fixtures.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door Frame size 65 x 125 mm & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 30 mm thick flush door shutter of required size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimumdensity of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
Providing and fixing C.P. brass long nose bib cock of 15 mm nominal bore of plumber or prayag make with quarter turn aerated type for splash free flow approved quality conforming to IS standards and weighing not less than 810 gms complete as per directions of EIC
Providing and fixing aluminium sliding door bolts size 250 x 16mm , ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete as per directions of EIC
Providing and fixing 125mm long aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per directions of EIC
Providing and fixing 200mmx 10m long aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per directions of EIC
Providing and fixing ISI marked aluminium 125 x 75 x 4mm butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. Complete as per directions of EIC
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per directions of EIC
Providing and fixing factory made P.V.C. door frame of TATA pravesh/ SINTEX make of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDMrubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. etc. including cost of all materials, labour for making ,fixing to the walls ,transportation, duties ,taxes etc. complete as directed and approved by EIC.
Providing and fixing factory made panel 30 mm thick pre laminated PVC door shutters TATA pravesh/ SINTEX make consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing including cost of materials ,labour,taxes,duties and all other incidental charges as directed and approved by Engineer In Charge.
Providing and fixing bright finished brass heavy duty parliamentary hinges 150x125x27x5 mmwith necessary screws etc. Complete as per directions of EIC
Providing and fixing bright finished brass tower bolts (barrel type) 250x10 mm with necessary screws etc. complete as per directions of EIC
Providing and fixing bright finished brass handles with screws etc. 125 mm complete as per directions of EIC
Providing and fixing bright finished brass door latch 300x16x5 mm with necessary screwsetc. complete as per directions of EIC
Providing and laying M20 Grade for RCC works with 20mm and down graded hard granite stone aggregate for RCC works like columns, lintel beams, chajas, stair case, slabs, etc including vibration, watering, curing, etc. complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC. (Steel reinforcement & form work shall be measured and paid separately.)
Providing and fixing reinforcement for all RCC items with TMT steel bars (Fe 500 grade as per IS 1786-1979) of VIZAG / TATA make including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved size and tying with binding wire of 20 SWG, forming grills for reinforcement work as per approved designs and drawings, cost and conveyance of steel bars from approved sources to site of work,cost of binding wire, cover blocks,all wastages, all incidental, operational, labour charges such as lifting charges , cutting, bending, placing in position, tying etc., complete for finished item of work with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.
Mirror polishing on marble work/Granite work/stone work in cladding and floors where ever required to give high gloss finish complete as per directions of EIC
Painting of steel surfaces with two coats of synthetic enamel paint of Asian paints or approved brand and to give an even shade as per directions of EIC
Providing wall painting, preparing the wall surface and applying two coats of interior grade premium grade Acrylic emulsion paint having VOC content less than 50 grams/litre of approved shade over a coat of water thinnable cement primer having VOC content less than 50 grams/litre, both of Asian paints or equivalent approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage etc., complete at all as approved, specified, and directed by EIC. Contractor, at his own cost, should ensure all safety measures if work is carried out at heights .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Scopeofwork.pdf
TENDER_DOCUMENT • 0.00 MB
NITCE5.pdf
TENDER_DOCUMENT • 0.30 MB
ChecklistofDocuments.pdf
TENDER_DOCUMENT • 0.02 MB
TBCE5.pdf
TENDER_DOCUMENT • 1.90 MB
PQCE5.xlsm
TENDER_DOCUMENT • 0.03 MB
coveringletterforEMDthroughSBIcollect.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIB.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureIIC.pdf
TENDER_DOCUMENT • 0.01 MB
EFTmandateform.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureL.pdf
TENDER_DOCUMENT • 0.01 MB
AnnexureI.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaA.pdf
TENDER_DOCUMENT • 0.01 MB
ProformaB.pdf
TENDER_DOCUMENT • 0.01 MB
PricebidCE52.xlsm
TENDER_DOCUMENT • 0.18 MB
PROCESSDOCUMENTFORSBICOLLECT.pdf
TENDER_DOCUMENT • 1.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .