GE 861EWS-57/2021-2022

Amount

S&F in repair earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in the ground or drawn in conduit /pipe or fixed to pole having size 32X6mm GI strip all as specified and directed by Engr-in- Charge.

S&F in replacement of Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, all as specified and directed by Engr-in- Charge.

Supply & fixing in replacement of Air termination, single pointed aluminium rod 12mm dia and 300mm long, including necessary fittings and fixtures, complete all as directed by Engr-in-charge.

M&L in replacement of Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw , complete all as directed by Engr-in-charge.

S&F in replacement of LED 36 Watt security light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as deffuser with IP66 protection and impact resistance of IKO7 complete all as directed by EIC. Make Bajaj Cat Part No ENXTP-36LWHCRPLSD or equivalent/CROMPTON GREAVES/GE/PHILIPS.

S&F in replacement of LED 60 Watt security light energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with acrylic cover as deffuser with IP66 protection and impact resistance of IKO7 complete all as directed by EIC. Make Bajaj Cat Part No ENXTP-60LWWCRPCSD or equivalent/CROMPTON GREAVES/GE/PHILIPS.

Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 25x4mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long copper strip of size 25x4mm with protection pipe of 20mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by -14.5%(Minus) (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

S&F 40mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors and roof for fixing of air termination rod complete all as specified and directed.

M/S Hilal Constructions

M/S AK ENTERPRISES

M/S Ghulam Hussain Lone

M/S HAMID & CO