Attending repair and renewals of 240HP 1480 RPM squirrel cage induction Motor unit 5 at Raw water Pumping station in salem corporation 155 MLD dedicated water supply scheme salem corporation

Amount

Charges for transporting the motor on to the lorry to workshop including loading the motor in the pump room site and unloading the motor at workshop including hire charges for movable crane in the workshop.

Dismantling of motor front and back side covers,bearing using hydraulic arrangements removing of rotor assembly using suitable tools plants etc.

Charges for Complete Cleaing of Stator and Rotor using High Pressure water washer and Pre Oven at 135 degree for Complete Removal of Moisture and Providing the Proper H class resin rich tapes Insulation in the exposed areas cost includes Oven charges for 22hrs and consumables and Labour ,tools .

Charges for Cleaning the complete rotor surface along with end rings,reconditiong the outer surface of bearing seated area by complete welding and finsihing true to size of orginal,dynamic balancing of the rotor,DP (Drip Proof) test carryingout on both short circuting rings and all joints of rotor bars on both ends for checking cracks in the presence of in the presence of testing engineer,Providing two coat of backtol red varnish of Dr.Beck make on the rotor surface and heading oven to attain curring Temperature cost include Oven charge and balncing Testing.

Providing of inner lead to coils end made of single core flexible copper cable with annealed tinned strands of original size up to the terminal box. These leads should having butyl type insulation, weather proof, rubber insulation termination of leads in the cable box.

Charges towards providing DE side end shield bearing seating sleeve in CI material turning finishing and checking the measurement to correct the bearing seating area to rectify the loose conditions.

Supply, delivery and fixing of Motor and Pump Coupling Set

Supply, delivery and fixing of DE side ball bearing 6320/C3-SKF using hydraulic arrangements and charges including applying of high quality lithium based grade crease.

Supply, delivery and fixing of NDE side Tapper roller bearing 29326 -SKF using hydraulic arrangements and charges including applying of high quality lithium based grade crease.

Charges for assembling motor by fixing DE side Beaing housing ,Greese cup collar ,end Cover and NDE side and Fan assembles ,Bearing housing cover and pulling of Rotor without damaging the coil with proper hydralic arrange and Skilled labours cost incluing tools and consumbales,Testing the 240HP at no Load with low frequency arrangements with presence of Company Engineer and two coat painting of motor with enamel paint etc.

Supply, delivery of SS shaft suitable size turning, grinding polishing, and threading for pump Head shaft including cost of materials and labour charge etc.after deducting the old scraps materials.

Charges for transporting the motor on to the lorry from workshop including loading the motor using movable crane in the workshop site and unloading the motor at Pumphouse including hire charges for movable crane in the Pump room site.

Supply and fixing of pully coupling rubber, bolt & nuts.

Charges for assembling and alignment the 240HP motor and carefully connecting LT Power Cable control Connection, tigting Pulley and Motor stool Bolts and nuts and aligning the Motor and Pump base stool carefully with necessary tools and arrangements.

KSP and Co (BID ID -1248934)