SPECIAL REPAIRS TO BLDG No. T 54 OF THE MLIRC AND SPECIAL REPAIRS TO BLDG No. P 107 SINGLE OFFICERS ACCN OF JL WING, THE INF SCHOOL BELGAUM UNDER GE I BELGAUM

Amount

Demolition of plain cement concrete in ground floors and pavings n. exc. 15cm thick, below or above GL all as specified and directed.

Demolition of plain cement concrete of any description and in any position, not otherwise specifically provided for all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar or lime cement mortar including all quoins, arches, pillars, etc. but excluding precast concrete articles, in any position below or above ground level all as specified and directed.

Cutting holes into or through stone walls built in cement mortar superficial area exc. 150 sqcm but n.exc. 400 sqcm each including making good in cement mortar 1:3 of cement concrete 1:2:4, type B-1 all as specified and as directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position, in un-framed work all as specified and directed.

Dismantling boarding of any description fixed in any position with nails all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed.

Taking down shutters of any description area n.exc 1 sqm each all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each all as specified and directed.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for all as specified and directed.

Dismantling of plain or corrugated steel sheets of any gauge and thickness, in roof coverings, valleys, gutters, etc. all as specififed and as directed.

Dismantling wall or ceiling boards or insulation boards/ slabs of any thickness including cover fillets all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed.

Demolition of stone slab and tiles of any description and any thickness in floors laid, bedded and pointed in any mortar all as specified and directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc., all as specified and directed.

Taking up or down existing unserviceable 15mm bore GI tubes of any grade and making good disturbed surfaces all as specified and directed.

Taking up or down existing unserviceable 20mm bore GI tubes of any grade and making good disturbed surfaces all as specified and directed.

Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in brick wall all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C0, using 12.5 mm graded stone aggregate and setting in CM 1:6 all as specified and directed.

M&L plain cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregate as in coping, bed blocks, eves filling between wall and tile/ sheet roofing including necessary form work all as specified and directed

Supply only approved integral water proofing compound all as specified and as directed.

M&L for 2nd class hard wood in scantling, clean sawn fixed in unframed work all as specified and directed.

M&L for aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc including dismantling of existing aluminium joineries and making good disturbed surfaces all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately.

M&L for aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and decorative teak veneered facing on both sides with lipping/ framing to match, fitted to chowkats all as specified and as directed.

S&F 6mm thick plywood, 5 ply, grade BWR, Type BB, fixed to timber work with screws all as specified and as directed.

Fixing only serviceable plywood obtained from dismantling, 6mm thick fixed to timber work with screws all as specified and as directed.

M&L for 18mm thick prelaminated particle board as in cupboard shutters, interior grade, prelaminated one side with decorative choice lamination on the other side with white lamination fixed to timber framework with screws all as specified and directed

S&F 1st class hardwood lipping to match the shutters, wrought, secured with nails or brads notexc. 3sqcm all as specified and as directed.

Easening and adjusting of existing wooden shutters exceeding 1 sqm and not exceeding 2 sqm each without taking down the shutter including easening and adjusting and re-securing in the same opening all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed

S&F stainless steel butt hinges 100mm in size, medium weight all as specified and directed.

S&F stainless steel butt hinges 75mm in size, medium weight all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm size all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm size all as specified and directed.

S&F extruded aluminium alloy handles, 150mm in size, fabricated type, anodised all as specified and directed.

S&F aluminium handle, 'D' type, anodised 125 mm in size all as specified and directed.

S&F 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed.

S&F in repairs Mild steel powder coated curtain rods, 25mm dia all as specified and as directed. Make: MARVEL or equivalent

S&F in repairs fancy type brackets, mild steel with antique finish or colour with rounded fancy ends suitable for holding 25mm dia single curtain rods, fixed to wall with necessary screws including drilling and plugging the holding screws and making good the wall surfaces all as specified and directed. Make: MARVEL or equivalent

Fixing only in repairs fancy type brackets holding single curtain rods, any description and size, fixed to wall with necessary screws including drilling and plugging the holding screws and making good the wall surfaces all as specified and directed.

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed.

S&F mild steel works in tubular trusses, rafters, purlins, etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 all as specified and as directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete conforming to Fe-410-W Gde-E-250 quality-A all as specified and as directed.

M&L for mild steel flats as in wind ties for roof including securing bolts and necessary drilling, conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L for pre-painted galvalume coated high tensile corrugated/ trapezoidal profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in roofing/ cladding fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.

M&L for pre-painted galvalume coated high tensile plain profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in ridges, valleys, hips, claddings, etc. fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.

S&F PVC (SWR) eaves gutter half rounded 150mm bore including pipe accessories PVC holder bats bolts nuts etc. including taking down existing unserviceable gutters of any description and size and making good disurbed surfaces all as specified and directed.

M&L for providing roof treatment with APP modified water proofing membrane with the following specifications all as specified and directed.

Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris to a distance exc 50m but n exc 100m

Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately

Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane 4mm thick and weight not less than 4.5kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying apply a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.

NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given IS 16540-2017/ IS 16532-2017. Contractor shall produce necessary test certificate of the manufacturer to the Engineer-in-charge before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.

M&L for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members all as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Make: Alstrong/ Aludecor/ Alucobond/ Eurobond

S&F 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminum anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc including provision three coats of white wash on ceiling including taking down existing unserviceable ceiling boards of any description alongwith cover fillets and making good disturbed surfaces all as specified and directed.

M&L for 12mm thick gypsum building board in false ceiling fixed with standard screws to existing grid frame work all as sper manufacturer's instructions all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring finished even and fair all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base for floors all as specified and directed.

M&L for coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm, as in floors, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured vitrified tiles, square or rectangular, dark shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

M&L for coloured matt finished ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured glazed ceramic tiles 350mm x 450mm x 7 to 8mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

M&L for machine cut granite slab, premium quality, any colour, 18 to 19mm thick, set and jointed with neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:4 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab, as in floors, platforms, steps, cills, etc. including rubbing and polishing complete all as specified and directed.

M&L for machine cut granite stone slab, 18 to 19mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 15mm thick backing coat in CM 1:4 all as specified and directed.

M&L for coloured, polished, designer cement concrete tiles 25cm x 25cm x 25mm thick, machine pressed, set, jointed and pointed in neat cement slurry, as in pathways, pavings, etc., laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for plain cement concrete 1:3:6, type C1, (Using 20 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. all as specified and directed.

M&L for forming 30mm deep x 10mm wide construction joint, filled with sealing compound grade "A" all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane, fixed in repairs, all as specified and directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer over 1mm thick layer of wall care putty, on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer over 1mm thick layer of wall care putty, on walls, pillasters, cornices, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable) over a coat of primer on ceilings, including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer on newly plastered surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of weather proof exterior acrylic emulsion paint over a coat of alkali resistant primer on surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for two coats of varnishing over oil staining over a filler coat of liquid transparent including necessary preparation of surface of wood and wood based materials, new or old, of any description and girth, not otherwise described all as specified and directed.

M&L for one coat of varnishing over oil staining over a filler coat of liquid transparent including necessary preparation of surface of wood and wood based materials, new or old, of any description and girth, not otherwise described all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including dismantling and taking down of existing PVC water storage tanks of any descriptionand capacity and testing complete all as specified and directed.

M&L for 500 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including dismantling and taking down of existing PVC water storage tanks of any descriptionand capacity and testing complete all as specified and directed.

S&F in repairs 25mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F in repairs 25mm dia PTMT ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

S&F 25mm bore CPVC pipes SDR 11 & CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable pipes of any grade and making good disturbed surfaces all as specified and directed.

M&L for 25mm bore UPVC pipes, pressure rating 10 kgf/ sqcm with and including provision of all fittings, fixed complete to walls/ roofs or laid in floors/ trenches including taking up or down existing unserviceable GI/ HDPE/ PVC pipes of any description alongwith its connections all as specified and as directed.

All as described in item No. 82 but 15mm bore UPVC pipes.

S&F 15mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S&F 25mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S & F in repairs 15 mm bore Bib tap, cast coppe alloy, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F in repairs 15mm bore bib taps, fancy type, brass CP, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Make: Cat No. CON 107 KN of JAQUAR or equivalent model in ESS ESS/ JOHNSON/ CERA

S&F in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. Make: Cat No. FUS 29041 of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed. Make: Cat No. ALD-CHR 563 of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipe all as specified and directed. Make: CAT No. CON-CHR 273 KNUPR of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed. Make: Cat No. CON 053 KN of JAQUAR or equivalent model in ESS ESS/ JOHNSON/ CERA

S&F in repairs towel ring, brass CP, fixed to wall with and including stainless steel screws & wooden/ plastic cleats all as specified and as directed.

S&F in repairs fancy type towel rod, brass CP, 600mm long, fixed to wall with plugs and chromium plated screws all as specified and as directed. Make: CAT No. ACN 1111 SM of JAQUAR or equivalent model in JOHNSON/ ESS ESS/ CERA

S&F in repairs brass chromium plated overhead shower set with flange, swivel type, suitable for fixing with 15mm bore GI pipe including CP shower arm, fixed with wall flange all as specified and directed. Make: Cat No. F160039 of HINDWARE or equivalent model in JAQUAR/ JOHNSON

S&F in repairs cascade type vitreous china wash down water closet pan (pedestal pattern), white, coupled with flushing cistern including 'P' or 'S' trap, seat and cover, fixing bolts etc, connecting to drain pipe and flushing pipe all as specified and as directed.

S&F in repairs vitreous china pedestal type wash basin, white, size 550x450mm, including swan neck fancy type pillar tap, waste pipe and waste fitting complete all as specified and directed.

S&F in repairs bass chromum plated toilet paper holder fixed to wall with wooden plugs, chromium plated brass screws and cup washers all as specified and as directed. Make: Cat No. 1151N of JAQUAR or equivalent model in JOHNSON/ ESS ESS/ ARK

S&F in repairs soap dish, vitreous china, white, any type, fixed to wall with CP screws all as specified and as directed.

S&F in repairs liquid soap container, PTMT, minimum weight 105 gms, fixed to wall with CP screws and wooden/ plastic cleats all as specified and as directed.

S&F in repairs 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, fixed to wall or laid trenches or in floors, all as specified and directed.

S&F in repairs 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, fixed to wall all as specified and directed.

S&F in repairs 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid trenches or in floors, all as specified and directed.

S&F in repairs 110mm bore UPVC (SWR) bends any radius all as specified and directed.

S&F in repairs 75mm bore UPVC (SWR) bends any radius all as specified and directed.

S&F in repairs 110mm bore UPVC (SWR) vent cowl all as specified and directed.

S&F in repairs UPVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement all as specified and as directed

S&F UPVC PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, 450mm long all as specified and directed.

Taking down carefully existing point wiring of light/ fan/ bell/ 5 Amps socket/ 15 Amps socket/ 2 way light point, etc. complete of any description including fittings and fixtures such as switches, sockets, call bells, ceiling roses, pendants, holders, regulators, call bells, light fittings, etc. and making good the disturbed surfaces of walls, floors, etc. all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC casing capping of suitable size and all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including 1/2 module surface mounting flush box with modular cover plate & frames for mounting switches/ sockets etc. for one light point controlled by one modular switch 1 way complete all as specified and directed.

All as described in item No. 112 but for one light point controlled by 2 Nos. of 2 way switches.

All as described in item No. 112 but for one ceiling fan/ exhaust fan point controlled by one switch and regulator.

All as described in item No. 112 but for one cal bell point controlled by one bell push.

All as described in item No. 112 but for one 05 Amps socket outlet on independent board.

All as described in item No. 112 but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 112 but wiring with 2.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable and with one run of single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable of size 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and directed.

M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and 1100 volt grade including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, including taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F modular switch, 1 module, 1 way, 6 Amps, 230 volts, AC, all as specified and directed.

S&F modular switch, 1 module, 2 way, 6 Amps, 230 volts, AC, all as specified and directed.

S&F modular bell push, 1 module, 1 way, 6 Amps, 230 volts, AC, all as specified and directed.

S&F modular switch, 1 module, 1 way, 16 Amps 230 volts, AC, all as specified and directed.

S&F modular socket outlet, 2 module, 6 Amps 2 cum 3 pin multipurpose all as specified and directed.

S&F modular socket outlet, 2 module, 2 pin 6A/ 3 pin 16 Amps, multipurpose all as specified and directed.

S&F modular fan regulator, step type, 2 module, 120 Watts, 230 volts, AC, all as specified and directed.

S&F PVC ceiling rose 3 terminal suitable for 230 volts AC supply all as specified and directed.

S&F in repairs call bell, ding dong, 230 volts AC supply all as specified and directed.

S&F in repairs, MCCB DB VTPN 8 Way, vertical type, suitable for MCCB as incomer 415 volts rated bus bars double door type including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCCB DB on board complete all as specified and directed.

S&F in repairs, MCB DB SPN 12 Way with 100 Amps rated bus bars double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

S&F in repairs, MCB DB SPN 8 Way with 100 Amps rated bus bars double door type and including provision of 2nd class hard wood board with sunmica top of suitable size fixed to wall and fixing of the MCB DB on board complete all as specified and directed.

S&F MCB TPN 63A 10KA 'C' series 50Hz AC supply all as specified and as directed.

S&F MCB DP 63A 10KA 'C' series 50Hz AC supply all as specified and as directed.

S&F MCB DP 40A 10KA 'C' series 50Hz AC supply all as specified and as directed.

S&F MCB SP 5-32A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed.

S&F surface mounting LED light fitting, 1x 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 1 No. of 20W LED, integrated electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F surface mounting LED light fitting, 1x 10W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 1 No. of 10W LED, integrated electronic driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F 42 Watts LED glare free luminaire recess mounted in square profile 2ft x 2ft size with 42 W high brightness SMD LEDs including electronic driver etc. complete with all accessories internally pre wired including cutting of false ceiling sheet to required size and fixing aluminium strip as per the existing size in false ceiling for fixing of light fitting and providing aluminium strip supports as reqd and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: HAVELLS VENUS NEO HE 2x2 or equivalent in CG/ Philips/ Wipro

S&F surface mounting LED down lighter 1x10W, 230V, with white powder coated polycarbonate housing and pressure die-cast heat sink and all accessories internally pre wired complete including provision of integrated LED strip 10 W and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: HAVELLS INTEGRA NEO SURFACE or equivalent in CG/ PHILIPS

S&F 9 Watts LED luminaire wall mounted, metal and satin nickel finish with glass cover with integral electronic driver etc. complete with all accessories internally pre wired 9W LED 2700K including provision of suitable size PVC board/ wooden board with sunmica top for fixing of light fitting and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: Cat No. 35027 of PHILIPS or equivalent in Crompton Greaves/ Havells/ Wipro.

S&F 2/ 3 Watts LED luminaire adjustable bed side lights in metal finish with glass cover with integral electronic driver etc. complete with all accessories internally pre wired 2/ 3W LED 3000K including connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: Cat No. 48042/ 48030/ 48031 of PHILIPS or equivalent in Crompton Greaves/ Havells/ Wipro.

S&F 25 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP65 protection, 25 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS or equivalent in Crompton Greaves/ Philips/ Wipro

S&F 15 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP65 protection, 15 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS or equivalent in Crompton Greaves/ Philips/ Wipro

S&F in repairs ceiling fan, 230 volts, single phase, 1200mm sweep, 5 Star rating with all accessories complete all as specified and as directed. Make: HAVELLS Model No. ES-50 Premium 5 STAR rating or equivalent model in makes CG/ ORIENT

Taking down ceiling fan from the existing location and refixing the same back to its original or at other locations as directed by Engineer-in-charge including replacement of required size copper conductor from ceiling rose to connector block of fan all as specified and as directed.

M&L for 50mm dia GI pipe medium grade cut to required length as per site requirement and fixed into walls in single piece without any joints as in supports for hanging of ceiling fans complete all as specified and directed.

S&F in repairs exhaust fan, 300mm sweep, 230/240 Volts, 1350 RPM, single phase, metallic finish powder coated, with wire grid protection and fixing arrangements with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan and testing including making circular hole of suitable in brick masonry wall and making good disturbed surfaces to match with existing surfaces all as specified as directed. Make: Havells VENTL-AIR DSP model or equivalent model in Almonard/ Crompton Greaves

S&F in repairs exhaust fan, 250mm sweep, 1200 RPM, 230 Volts, single phase, PVC body with gravity shutter and fixing arrangements including fixed into plywood base of suitable size with suitable bolts and nuts and fixing the plywood to existing window and provision of suitable size flexible copper conductor cable from connector to ceiling rose all as specified as directed. Make: Ventil Air-DX model of HAVELLS or equivalent model in USHA/ KHAITAN/ CROMPTON GREAVES

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in soft/ loose soil all as specified and directed.

Returning filling in with approved excavated soil including spreading levelling, watering and well ramming in layers n. exc. 25 cm thick all as specified and directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and directed.

M&L for approved riddled earth, spread dry in trenches as in cable cushioning at bottom and top including punning down all as specified and as directed. Note :- Punned thickness will be considered for payment.

M&L for burnt bricks, old size, sub class 'B' of designation 75, laid in trenches as in protection for UG cables all as specified and as directed.

M&L for GI tubes, light grade, 40mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 16 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete laid in repairs all as specified and as directed. Note: Excavation, earth work, sand cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

Supplying, installing, testing and commissioning of Main switch board, cubical type, factory made, indoor type, IP 54 protection class, 415 volts , 50Hz, 3 phase, 4 wire system with 200 Amps current carrying capacity, made out of 2mm thick CRCA sheet, 1.0m x 1.0m x 0.45m size, vermin and dust proof, front operated double door with locking arrangement and ventilator slots, cable glands, lugs, etc. and painting with epoxy powder coated over a coat of red oxide zinc chromate primer suitable to accommodate and including the following mentioned fittings with internal copper wiring complete including taking down existing unserviceable switch boards of any description and size all as specified and as directed.

(a) Aluminium bus bar of 200 Amps rating for 3 phase & neutral - 1 Set (b) MCCB 4 Pole 415 Volts 16 KA 100 Amps - 01 No. (Incoming) (c) MCB DP 240 Volts 10 KA 'C' series, 16 Amps - 01 No. (d) MCB DP 240 Volts 10 KA 'C' series, 32 Amps - 06 Nos. (e) Change over switch, 4 Pole, 415 V, 100 Amps -01 No. (f) LED Indicating lamps indicating R, Y, B -01 Set (g) Space for and fixing of 7 Nos. of HESCOM/ MES electric energy meters.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

M/s. J P CONSTRUCTIONS

M/s.Y.N.PATIL

M/S SANJAY B SHARMA

M/s. KIRAN M CHOUGULE

SHRI.H.R.PATIL

RAHUL SAYAJIRAO DESAI

M/S MAHADEV M PATIL