Supplying , Installation, testing and Commissioning of High mast pole at Terracon Homes in ward no 13, ANR Block in ward no 16, Anekal Chandapura main road in ward no 17 and Rathnamma Coloney in Chandapura TMC Limit

Installation Of Two High Mast at Chandapura TMC in Bangalore Urban District

Earth work excavation for Foundation by Mechanical means for all works & depth upto 3m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Removing of Unserviceable Soil with Disposal upto a Suitable Distance as Directed by the Engineer incharge of Work (PWD SR 20121-22 Vol-3 P-15, I No- 3.1) ---- As per bid document

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Fabrication, Supplying, Erection, Testing and Commissioning of 12 m/12.5 m Long - Top 100 mm and Bottom 310 mm dia long Polygon high mast with Single/Multiple telescopic sections having, (minimum ove...

Fabrication, Supplying, Erection, Testing and Commissioning of16 ms long Polygon high mast with Single/ Multiple telescopicsections having, (minimum overlap distance of 1.5 times of topsection) thickn...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit reaking capac...

Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-6...

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 100 to ...

Laying of UG Cables by Trenchless Technology (HDD) by adopting Horizontal Boring & Drawing of cable including preparation at site. Normal soil 5/6'' Bore. (BESCOM SR 2023-24 P-56, I No- 28.01) ----...

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Supplying and fixing Microprocessor Based Electronic timer (without contactor, Din mounting using necessary bolts, nuts and washers etc., 3-120 sec setting (BESCOM SR 2023-24 P-21, I No- 5.47) --...

Fabricating supplying and mounting MS Box made out 14SWG suitable for floor/wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

Supplying & fixing of 100Amps Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.(BESCOM SR 2023-241 P-14, I No - 5.7.4) ---- As per bid document

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc, and fixing on existing wood or metal box using NF screws (BESCOM SR 2023-241 P-9, I No -...

Supplying and Fixing 40x40x6 mm angle iron frame work fabricated out of M.S.Angle iron and M.S.Flat with bolts,washers, etc.,and painted with 2 coats of red oxide and then two coats of approved paint....