Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.9 LAccepted-AOC | L-1 | Accepted-AOC Accepted Being L-1 | |
| 2 | L-2₹7.9 L+₹1.9 L (32.7%)Rejected-Finance | L-2 | Rejected-Finance Other Than
L-1 | |
| 3 | L-3₹8.7 L+₹2.8 L (47.0%)Rejected-Finance | L-3 | Rejected-Finance Other Than
L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Copy of EPF code number/allotment letter has not been uploaded/submitted | |
| 5 | Rejected-Technical | - | Rejected-Technical Firm is not Enlisted in particular category of work |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR/RENEWAL OF STEEL/WOODEN FURNITURE AT SHARIFABAD MIL STN (ARMY UNITS) UNDER AGE (I) CIF (K).
2022_MES_541338_1
CA NO. AGE (I) CIF (K)- 60/2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹20,000
Yes
6 Sept 2022
27 Jul 2022
26 Aug 2022
27 Jul 2022
24 Aug 2022
10 Aug 2022
Amount
REPAIRS/RE-TAPPING OF CHARPOY GI PIPE (DRAWING NO.FD-220)
Removing of old unserviceable newar and S&F new plywood commercial 12 mm thick of size 1800 x 900 mm with 12 Nos screws after fixing two iron strips 2mm thick 1" wide and 3' long having both ends bending 1.5" around long rails with screw tightly complete all as specified and directed by Engineer-in-Charge.
Removing of old unserviceable/broken long rails of charpoy GI pipe and S&F new long rails made out of 32 mm GI pipe medium grade, ISI marked duly threaded on both sides including two Nos GI check nuts all as shown on drawings.
Removing of old unserviceable/broken short rails of charpoy GI pipe and fixing short rails made out from old long rails obtained from Ser item No 1.02 above including threaded both ends complete all as specified and directed by Engineer-in-Charge.
Removing of old unserviceable/broken elbow of charpoy GI pipe and S&F new GI elbow 32 mm bore 03 way, ISI marked as approved by Engineer-in-Charge.
Removing of old unserviceable broken legs of charpoy GI pipe and fixing legs made out of short rails and long rails including fixing hard wood plugs to the bottom of legs and also fixing of ser item No 1.02 & 1.03 above all as per drawings.
Taking out old unserviceable/broken GI check nuts from charpoy GI pipe and S&F new GI check nuts 32 mm bore size all as shown on drawings.
REPAIRS/ PAINTING TO ALMIRAH LARGE STEEL WITH SHELVES (DRAWING NO. FD-67/1031)
Preparation of steel surfaces, including rusted portion of almirah large steel by scraping with sand paper, applying one coat of synthetic enamel OG paint with spray gun on complete almirah inside and out side after completing welding, denting works wherever required. complete all as specified and directed by Engineer-in-Charge.
Removing of old unserviceable/broken handle of almirah large steel and S&F new C P handle as approved by Engineer-in-Charge and all as directed.
Removing of old unserviceable/broken lock of almirah large steel and S&F new lock of make: Godrej/Harrison/Link as approved by Engineer-in-Charge and all as directed
Removing of old unserviceable/broken single shelf of almirah large steel and S&F new shelf made out of M S sheet 1 mm thick fabricated to shape and size all as shown in drawings.
Removing of old unserviceable/broken legs of almirah large steel and S&F new legs made out of M S sheets 1 mm thick fabricated to shape and size all as shown in drawings
Removing of old unserviceable/broken clips for fixing of almirah large steel and S&F new clips made out of mild steel all as shown in drawings.
REPAIRS/PAINTING TO ALMIRAH MEDIUM STEEL WITH SHELVES (DRAWING NO. FD-67/1032)
Preparation of steel surfaces, including rusted portion of almirah medium steel by scraping with sand paper applying one coat of synthetic enamel OG paint with spray gun on complete almirah inside and out side after completing welding, denting works wherever required. complete all as specified and directed by Engineer-in-Charge.
Removing of old unserviceable/broken handle of almirah medium steel and S&F new CP handle as approved by Engineer-in-Charge and all as directed.
Removing of old unserviceable/broken lock of almirah medium steel and S&F new lock of make: Godrej/Harrison/Link as approved by Engineer-in-Charge and all as directed.
Removing of old unserviceable/broken single shelf of almirah medium steel and S&F new shelf made out of MS sheet 1 mm thick fabricated to shape and size all as shown in drawings.
Removing of old unserviceable/broken legs of almirah medium steel and S&F new legs made out of MS sheets 1 mm thick fabricated to shape and size all as shown in drawings.
Removing of old unserviceable/broken Clips for fixing of almirah large steel and S&F new clips made out of mild steel all as shown in drawings.
BOX KIT STEEL (DRAWING NO. FD-98) Repair/replacement of old broken/unserviceable handle, hinges, hasp and staple for locking arrangement of box kit steel and painting with one coat of synthetic enamel black paint with spray gun after completing all welding, denting works wherever required all as directed.
REPAIRS/PAINTING OF TABLE OFFICE CLERK STEEL (DRAWING NO. FD-84/1004)
Painting table office Clerk steel with one coat of synthetic enameled olive green paint after welding works and S & F new leg shoes wherever required all as directed by Engineer-in-Charge.
Removing of old unserviceable/broken top of table office clerk steel and S&F new top made out of pre-laminated particle board 18 mm thick exterior grade, ISI marked including 04 mm thick teak wood beading all around to top (Make : National/Kit Ply/Nova Pan/DEco/Bhutan Board) wooden surface shall be french polished all as directed by Engineer-In-Charge.
Removing of old unserviceable/broken drawers of table office Clerk steel and S&F new drawers made out of MS sheet 01 mm thick including spary painting one coat of synthetic enameled OG paint over one coat of primer paint, size and shape shall be as per drawings.
Removing of old unserviceable/broken drawers locks of table office clerk steel and S&F new drawers locks of make Godrej/Harrison/Link as approved complete all as specified and directed by Engineer-In-Charge.
LOCKER BED SIDE STEEL (DRAWING NO. FD-1029) Preparing steel surfaces of locker steel (with bilt) and applying one coat of synthetic enamel paint OG shade through spray gun to both inner and outer sides after completing necessary welding, denting work including hasp and staple, hingrs and hanging rod wherever required all as directed by Engineer-in-Charge.
REPAIRS TO BED PLY WOOD TOP (DRAWING NO. FD-246).
Removing of old unserviceable/broken ply top of bed ply wood top and providing new top of commercial ply wood 12 mm thick, BWR grade, ISI marked of existing size with screws, rest all as per drawing.
Removing of old unserviceable/broken head rest from bed ply and S&F new head rest made out of 1st class sheesham wood covered with 04 mm thick one side teak face plywood fitted on both side duly french polished complete all as directed.
Removing of old unserviceable/broken foot rest of bed ply wood. and S&F new foot rest of bed ply wood made out of 1st class sheesham wood covered with 04 mm thick one side teak face plywood fitted on both side duly french polished complete all as directed.
Removing of old unserviceable/broken long rail from bed ply and S&F new long rail made out of 1st class sheesham wood duly french polished, all as per drawing.
Removing of old unserviceable/broken Short rail from bed ply and S&F new short rail made out of 1st class sheesham wood duly french polished, all as per drawing.
REPAIRS OF CHARPOY GI PIPE DOUBLE BUNK (DRAWING NO.FD-263)
Removing of old unserviceable/broken ply top of bed ply wood top and providing new top of commercial ply wood 12 mm thick, BWR grade, ISI marked of existing size with screws, rest all as per drawing.
Removing of old unserviceable/broken head rest from bed ply and S&F new head rest made out of 1st class sheesham wood covered with 04 mm thick one side teak face plywood fitted on both side duly french polished complete all as directed.
Removing of old unserviceable/broken foot rest of bed ply wood. and S&F new foot rest of bed ply wood made out of 1st class sheesham wood covered with 04 mm thick one side teak face plywood fitted on both side duly french polished complete all as directed.
Removing of old unserviceable/broken long rail from bed ply and S&F new long rail made out of 1st class sheesham wood duly french polished, all as per drawing.
REPAIRS TO TABLE DINNING 8 PERSONS (DRAWING NO. FD-30/273)
Removing of old unserviceable/broken legs of table dining 8 persons and supply and fixing new legs made out of sheesham wood all as shown in drawings.
Removing of old unserviceable/broken long side rails of table dining 8 persons and supply and fixing new long side rails made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken short side rails of table dining 8 persons and supply and fixing new short side rails made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken stiffners long of table dining 8 persons and supply and fixing new stiffner long made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken stiffners short of table dining 8 persons and supply and fixing new stiffners short made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken top of table dining 8 persons and supply and fixing new top made out of 18/19 mm thick pre-laminated particle board, exterior grade including 04 mm thick 1st class teak wood beading duly french polished all as shown in drawings
REPAIRS TO TABLE DINNING 6 PERSONS (DRAWING NO. FD-30/273)
Removing of old unserviceable/broken legs of table dining 6 persons and supply and fixing new legs made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken long side rails of table dining 6 persons and supply and fixing new long side rails made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken short side rails of table dining 6 persons and supply and fixing new short side rails made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken stiffners long of table dining 6 persons and supply and fixing new stiffner long made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken stiffners short of table dining 6 persons and supply and fixing new stiffners short made out of sheesham wood all as shown in drawings
Removing of old unserviceable/broken top of table dining 6 persons and supply and fixing new top made out of 18/19 mm thick pre-laminated particle board, exterior grade including 04 mm thick 1st class teak wood beading duly french polished all as shown in drawings
REPAIRS TO TABLE DRESSING GENTS WITH MIRROR (DRAWING NO. FD-31/230).
Removing of old unserviceable/broken mirror of table dressing gents and S&F new framed mirror made out of sheesham wood with mirror of thickness all as shown in drawing.
Removing of old unserviceable/broken drawer of table dressing gents and S&F new one made out of sheesham wood all as shown in as per drawing.
Removing of old unserviceable/broken back of box of table dressing gents and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
Removing of old unserviceable/broken top of box of table dressing gents and S&F new top made out of 12 mm thick commercial ply wood duly covered with plastic laminated sheet 0.80 mm thick teak face all as shown in as per drawing.
Removing of old unserviceable/broken bottom planks of box of table dressing gents and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
Removing of old unserviceable/broken top planks of box of table dressing gents and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
POLISHING OF WOODEN FURNITURE ITEMS Preparing of wooden surfaces smooth for under mentioned furniture items and applying one coat of french polish all as specified and directed by Engineer-In-Charge. (Make of french polish: Rajdoot / Nerolac / Shalimar)
Bed Hard/Bed Newar (Drawing No.FD-21/246)
Chair Easy (Drawing No.FD-229/17(M)
Chair Dinning (Drawing No.FD-228/16(M))
Chair Writing (Drawing No.FD-280/20(M))
Chair WB with out arms (Drawing No.FD-285/56(M))
Table Writing (Drawing No.FD-249/27(M)/33(M))
Table Dinning 06/08 persons (Drawing No.FD-273)
Table 3' x 2' with drawers (Drawing No.FD-41/283/2895)
Table 3' x 2' without drawers (Drawing No.FD-42/284)
Table centre (Drawing No.FD-29/274)
Table dressing gents with mirror (Drawing No.FD-230/31(M))
Table peg (Drawing No.FD-384/25(M))
Table bed side (Drawing No.FD-FD-28(M))
Teapoy (Drawing FD 278/34(m))
Sofa set 02 seater (two single pieces) (Drawing No.FD-281/273)
Sofa set 05 seater (two single pieces and one long piece) (Drawing No.FD-281/273)
Sofa set 04 seater (four single pieces) (Drawing No.FD-281/234)
REPAIRS TO TABLE 3' x 2' WITH/WITHOUT DRAWER (DRAWING NO. FD-283/284/142) Removing of old unserviceable/broken parts of table 3' x 2' with/without drawer and S&F the new parts as under :-
Legs of hard wood sheesham, size and shape as per drawings.
Long side rails of hard wood sheesham, size and shape as per drawings.
Short side rails of hard wood sheesham, size and shape as per drawings.
Bottom long stiffeners of hard wood sheesham, size and shape as per drawings.
Bottom short stiffeners of hard wood sheesham, size and shape as per drawings.
Top made of pre-laminated particle board exterior grade 19 mm thick with teak wood beading all around the top, size and shape as per drgs. Wooden surface shall be french polished all as directed by Engineer-in-Charge.
Drawer for table 3' x 2' all as specified and shown in drgs.
REPAIRS TO TEAPOY WOODEN (DRAWING NO. FD-382)
Removing old unserviceable/broken legs of teapoy wooden and S&F new legs made out of 1st class hard wood sheesham, duly french polished made to shape all as shown in drawings.
Removing old unserviceable/broken front/back rails of teapoy wooden and S&F new front/back rails made out of 1st class hard wood sheesham, duly french polished made to shape all as shown in drawings.
Removing old unserviceable/broken side rails of teapoy wooden and S&F new side rails made out of 1st class hard wood sheesham, duly french polished made to shape all as shown in drawings.
Removing of old unserviceable/broken top of teapoy wooden and S&F new top made out of pre-laminated particle board 19 mm thick exterior grade, ISI marked including 04 mm thick 1st class teal wood beading all around including french polished to wooden surface all as specified and directed by Engineer-in-Charge.
REPAIRS TO CHAIR WRITING (DRAWING NO. FD-20(M)/280) Removing of old unserviceable/broken parts of chair writing and S&F the new parts as under :-
Rear legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front/back/side rails made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Bottom/top stiffners made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Arms made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
REPAIRS TO CHAIR DINING (DRAWING NO. FD - 16 (M)/228) Removing of old unserviceable/broken parts of chair dining and S&F the new parts as under :-
Rear legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front/back/side rails made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Top and bottom stiffener made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
REPAIRS TO CHAIR WOODEN BOTTOM WITHOUT ARMS (DRAWING NO. FD- 58/285) Removing of old unserviceable/broken parts of chair wooden bottom without arms and S&F the new parts as under :-
Rear legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front legs made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front/back/side rails made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Top/bottom stiffener made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
New seat made out of 6 mm thick commercial ply wood, BWR grade, ISI marked all as per drawing.
REPAIRS TO CHAIR EASY (DRAWING NO. FD-17 (M)/229) Removing of old unserviceable/broken parts of chair easy and S&F the new parts as under :-
Rear legs made out of 1st class sheesham wood having plastic shoes and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Front legs made out of 1st class sheesham wood having plasting shoes and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Arms made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
Removing of old unserviceable/broken top back of Chair easy and S&F top back made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drg.
Removing of old unserviceable/broken cane rail of chair easy and S&F new cane rails made out of 1st class sheesham wood and fixed with glue and bamboos pins duly french polished, size and shape all as per drawing.
REPAIRS TO TABLE PEG (DRAWING NO. FD-227)
Removing of old unserviceable/broken legs of table peg and S&F new legs made out of 1st class sheesham wood duly french polished having plastic shoes at bottom fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken front/back rails of table peg and S&F new front/back rails made out of 1st class sheesham wood duly french polished having plastic shoes at bottom fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken side rails of table peg and S&F new side rails made out of 1st class sheesham wood duly french polished having plastic shoes at bottom fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken top of table peg and S&F new top made out of pre-laminated particle board 18/19 mm thick one side teak face, exterior grade, ISI marked including 04 mm thick 1st class teak wood beading duly french polished, all as per drawing.
TEAPOY VERANDAH (DRAWING NO. FD-35(M)/256) Removing of old unserviceable top of teapoy verandah and S&F new top made out of pre-laminated particle board exterior grade 18 mm thick including teak wood beading all around the top complete all as shown in drawings.
LOCKER BED SIDE (DRAWING NO. FD-222/WDF-01) Removing of old unserviceable/broken parts of locker bed side and S&F the new parts as under :-
Back side of bed side locker locker made out of 06 mm thick commercial ply wood all as per drawing.
Top of bed side locker made out of 19 mm thick particle board with commercial ply wood on both side, all as per drawing.
Vertical partition of bed side locker made out of 12 mm thick particle board with commercial ply wood on both side, all as per drawing.
Shelves of bed side locker made out of 12 mm thick particle board, all as per drawing.
Shutters of bed side locker made out of 19 mm thick paricle board with commercial ply on both side, all as per drawing.
Handle aluminum 100 mm long (ISI marked) all as per drawing.
Hasp and staples 75 mm aluminum (ISI marked) all as per drawing.
Legs fo bed side locker made out of 1st class sheesham wood all as per drawing.
Re-Canning the following items of furniture with cane plastic (Make of Cane: Shah/Premier brand and its equivalent brand as approved by Engr-in-Charge), width of cane plastic shall be as per drg of respective items and shall be woven as per Godrej pattern (02 mm wide for canning and 03 mm wide for borders and 04 mm for chair verandah/ conduit pipe all as specified and directed by Engineer-in-Charge.
Chair writing (DRAWING NO. FD-20(M)/280)
Chair dinning (DRAWING NO. FD-228/279)
Chair Easy (DRAWING NO. FD-17(M)/229)
Chair Verandah (DRAWING NO. FD-19/256)
REPAIRS TO SOFA SET (DRAWING NO. FD-18/281)
Removing of old unserviceable tapestry cloth, lining cloth, hessain cloth, cotton layer and coir fiber from single sofa seats with arms and S&F new materials making it as per drawing, materials shall be used of make as approved by Engineer-in-Charge.
Removing of old unserviceable tapestry cloth, lining cloth, hessain cloth, cotton layer and coir fiber from two seater with arms and S&F new materials making it as per drawing, materials shall be used of make as approved by Engineer-in-Charge.
Removing of old unserviceable tapestry cloth, lining cloth, hessain cloth, cotton layer and coir fiber from four seater with arms and S&F new materials making it as per drawing, materials shall be used of make as approved by Engineer-in-Charge.
Removing of old unserviceable spring from sofa sets both from seat and back and S&F new one as per drawing and as directed by Engineer-in-Charge. Material to be used shall be as approved by Engineer-in-Charge.
Removing of old unserviceable tapestry cloth from sofa seat & back of sofa sets and supply and fixing new tapestry cloth and tapestry cloth to be used shall be approved by Engineer-in-Charge.
REPAIRS TO TABLE BED SIDE (DRAWING NO. FD-28/276)
Removing of old unserviceable/broken top of table bed side and S&F new top made out of prelaminated particle board 12mm thick exterior grade one side teak face all as per drawing.
Removing of old unserviceable/broken shelves of table bed side and S&F new shelves made out of prelaminated particle board 12mm thick exterior grade one side teak face all as per drawing.
Removing of old unserviceable/broken sides of table bed side and S&F new sides made out of prelaminated particle board 12mm thick exterior grade one side teak face all as per drawing.
Removing of old unserviceable/broken legs of table bed side and S&F new legs made out of sheesham wood all as per drawing.
Removing of old unserviceable/broken back of table bed side and S&F new back made out ofcommercial plywood 6mm thick all as per drawing.
REPAIRS TO BOOK CASE (DRAWING NO. FD-1028)
Removing old unserviceabl /broken back ply wood of book case and supply and fixing new ply wood commercial 6mm thick as per drawing.
Removing of unserviceable/broken top of book case and S&F new one made out of pre laminated particle board 18/19mm thick one side teakface and other side white colour all as per drawing.
Removing of old unserviceable/broken shutter of book case and S&F new one made out of block board 19mm thick teak face one side duly french polished as per drg. Drawer of side board and S&F of new drawers made out of Ist class sheesham wood and ply wood commercial 06mm thick all as per drawing.
Removing of old unserviceable/broken legs of book case and supply and fixing new one made out of sheesham wood duly french polished all as per drawing.
Removing of old unserviceable/broken side partition of book case and supply and fixing new one made out of 18/19mm thick pre laminated particle board all as per drawing.
Removing of old unserviceable/broken shelves of book case and S&F new one made out of 18/19mm thick prelaminated particle board all as per drawing.
Removing of old unserviceable knob of book case and S F new one size 32mm C P all as per drawing.
REPAIRS TO TABLE WRITING WOODEN (DRAWING NO. FD-249).
Removing of old unserviceable/broken long legs of table writing wooden and S&F new legs made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken short legs of table writing wooden and S&F new legs made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken side long rails of table writing wooden and S&F new side rails made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken side short rails of table writing wooden and S&F new side short rails made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken bottom large stiffener of table writing wooden and S&F new bottom large stiffener made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken bottom shorter stiffener of table writing wooden and S&F new bottom shorter stiffener made out of 1st class hard sheesham wood, duly french polished fixed with glue and bamboo pins all as per drawing.
Removing of old unserviceable/broken shutter of table writing and S&F new shutter made out of one side teak face black board 18/19 mm thick duly french polished, all as per drawing.
Removing of old unserviceable/broken top of table writing and S&F new top made out of pre-laminated particle board 18/19 mm thick one side teak face, exterior grade, ISI marked including 04 mm thick 1st class teak wood beading duly french polished, all as per drawing.
Removing of old unserviceable/broken drawer of table writing and S&F new drawer made out of 1st class sheesham wood and ply wood commercial 06 mm thick all as per drawing.
REPAIRS TO TABLE DRESSING LADIES WITH MIRROR (DRAWING NO. FD-251).
Removing of old unserviceable/broken mirror of table dressing ladies and S&F new framed mirror made out of sheesham wood with mirror of thickness all as shown in drawing.
Removing of old unserviceable/broken drawer of table dressing ladies and S&F new one made out of sheesham wood all as shown in drawing.
Removing of old unserviceable/broken back of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in drawing.
Removing of old unserviceable/broken top of box of table dressing ladies and S&F new top made out of 12 mm thick commercial ply wood duly covered with plastic laminated sheet 0.80 mm thick teak face all as shown in drawing.
Removing of old unserviceable/broken bottom planks of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in drawing.
Removing of old unserviceable/broken top planks of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in drawing.
REPAIRS TO MIRROR WITH SELF.
Removing old unserviceable/ broken mirror and S&F new framed mirror made out of sheesham wood all as per drawing
Removing old unserviceable/ broken S&F new one made of sheesham wood all as per drg.
Removing of old unserviceable/broken back of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
Removing of old unserviceable/broken top of box of table dressing ladies and S&F new top made out of 12 mm thick commercial ply wood duly covered with plastic laminated sheet 0.80 mm thick teak face all as shown in as per drawing.
Removing of old unserviceable/broken bottom planks of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
Removing of old unserviceable/broken top planks of box of table dressing ladies and S&F new one made out of sheesham wood plank 12 mm thick duly french polished all as shown in as per drawing.
REPAIRS TO SIDE BOARD (DRAWING NO. FD-241) Removing of old unserviceable/broken parts of side board and S&F the new parts as under :-
New Top of size 1220 x 445 mm made out of 18/19 mm thick prelaminated MDF Board , ISI marked, complete all as shown in drawing and as directed by Engineer - in- charge
New long rail of size 25mm x 45mm x 1120mm made out of 1st class hard wood, complete all shown in drawing and directed by Engineer - in -charge .
New leg of size 125mm x 45mm x 45mm made out of 1st class hard wood, complete all as shown in drawing and directed by Engineer - in -charge.
New short rail of size 25mm x 45mm x 400mm made out of 1st class hard wood, complete all as shown in drawing and directed by Engineer - in- charge.
New sutter of size 835mm x 585 mm made out of 18/19mm prelaminated MDF board duly edging with 5 mm thick 1st class hard wood beading, complete all as per drawing.
New drawer of size 385mm x 400mm x 125 mm sides of drawers 02 nos of size 19 x 125 x 400mm of hard wood back 19 x 25 mm x 385 mm (HW) and front 19 mm x 125 mm (MDF) Bottom 6mm ply of size 385mm x 400mm, complete all as shown in the drawing and as directed by Engineer - in- Charge .
New back made out of 6mm plywood commercial BWR grade, complete all as shown in drawing and as directed by Engineer- in- Charge .
New knob of best quality approved by AGE (I)/ Engr in charge . complete all as shown in drawing and as directed by Engineer- in- Charge .
Polishing two coats to new and old surfaces of side board after repair with french polish of approved quality after preparation of all surfaces, complete all as shown in drawing and as directed by Engineer- in- Charge .
REPAIR TO SOFA SET 5 SEATER (Two SINGLE SEATER AND ONE LONG PIECE FOR 3) (DRAWING NO. FD-281/373)
Removing of old unserviceable/broken front and rear legs of sofa set and S&F the new front and rear legs of sofa set 5 seater of size 70 x 35 x 530 mm made out of 1st class hard wood as per exiting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken back/front rail of Single seater sofa and S & F back /front rail of single seater sofa of size 35 x 100 x 530 mm made out of 1st class hard wood as per extisting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken Battens of Single seater sofa and S & F back /front rail of single seater sofa of size 20 x 50 x 535 mm, made out of 1st class hard wood as per extisting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken arms of sofa set 5 seater and S & F new Arm made out of 1st class hard wood as per existing shape ans size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken cushion from seat of sofa 5 seater and S & F new foam cushion 100mm thick 40 density /Make .Kurnal/sleepwel with new Cushion cover made out of approved tepestry cloth of best quality duly stiched with fine standard thread and providing best quality zip with runner on one side as approved by AGE(I)/Engineer- in - Charge, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken back /front rail of sofa 3 seater and S & F new back /front of sofa set 3 seater of size 1590x 35 x 100 mm made out of 1st class hard wood as per existing shape ans size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken rubber shoes and S & F new Rubber /PVC shoe of superior quality with steel plated screw suitable size, complete all as shown in drawing and directed by Engineer- in- Charge.
Polishing two coats to new and old surfaces of sofa set 5 seater after repair with french polish of approved quality after preparation of all surfaces, complete all as shown in drawing and as directed by Engineer- in- Charge .
Removing/ opening of old unserviceable cushion cover and S & F new cushion cover of size 21'' x 22'' x 4" made out of approved Tepestry cloth of best quality duly stiched with fine standard thread and providing best quality Zip with runner on one side as approved be AGE(I)/Engineer -in- Charge, complete all as shown in drawing and directed by Engineer- in- Charge.
REPAIR TO TABLE DINNING OR's PERSONS (DRAWING No FD-223)
Removing of old unserviceable/broken legs of table dining OR's persons and supply & fixing new legs made out of sheesham wood , complete all as shown in drawing.
Removing of old unserviceable/broken long side rails of table dining OR's persons and supply & fixing new long side rails made out of sheesham wood , complete all as shown in drawing.
Removing of old unserviceable/broken short side rails of table dining OR's persons and supply & fixing new short side rails made out of sheesham wood , complete all as shown in drawing.
Removing of old unserviceable/broken stiffner long of table dining OR's persons and supply & fixing new stiffner long made out of sheesham wood , complete all as shown in drawing.
Removing of old unserviceable/broken stiffner short of table dining OR's persons and supply & fixing new stiffner short made out of sheesham wood , complete all as shown in drawing.
Removing of old unserviceable/broken top of table dining OR's persons and supply & fixing new top made out of 18/19 mm pre-laminated particle board, exterior grade including 04 mm thick 1st class teak wood beading duly french polished, complete all as shown in drawing.
REPAIR TO SOFA SET SINGLE SEATER (ONE SINGLE SEAT) (DRAWING NO. FD-281/373)
Removing of old unserviceable/broken front and rear legs of sofa set single seater and S&F the new front and rear legs of sofa set single seater of size 70 x 35 x 530 mm made out of 1st class hard wood as per exiting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken back/front rail of Single seater sofa and S & F back /front rail of single seater sofa of size 35 x 100 x 530 mm made out of 1st class hard wood as per extisting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken Battens of Single seater sofa and S & F back /front rail of single seater sofa of size 20 x 50 x 535 mm, made out of 1st class hard wood as per extisting shape and size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken arms of sofa set single seater and S & F new Arm made out of 1st class hard wood as per existing shape ans size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken cushion from seat of sofa single seater and S & F new foam cushion 100mm thick 40 density /Make .Kurnal/sleepwel with new Cushion cover made out of approved tepestry cloth of best quality duly stiched with fine standard thread and providing best quality zip with runner on one side as approved by AGE(I)/Engineer- in - Charge, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing of old unserviceable/broken rubber shoes and S & F new Rubber /PVC shoe of superior quality with steel plated screw suitable size, complete all as shown in drawing and directed by Engineer- in- Charge.
Removing/ opening of old unserviceable cushion cover and S & F new cushion cover of size 21'' x 22'' x 4" made out of approved Tepestry cloth of best quality duly stiched with fine standard thread and providing best quality Zip with runner on one side as approved be AGE(I)/Engineer -in- Charge, complete all as shown in drawing and directed by Engineer- in- Charge.
Note :- An amount of Rs.8,500.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
DUKE CONSTRUCTION
M/S RATHER STEEL WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .