Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹32.3 L+₹5.9 L (22.4%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹28.3 L
EMD Value
₹56,680
Closing Date
19 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
PROVN OF OVERHAUL/ R4 REPAIR OF SMALL ARMS WITH ALLIED FACILITY AT BLDG NO P-118 AT 7011 EME BN AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT
2022_MES_549037_2
GE/JULL/ET-60/2022-23
Open Tender
Civil Works
Item Rate
183 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹56,680
Yes
1 Dec 2022
31 Oct 2022
26 Nov 2022
31 Oct 2022
19 Nov 2022
7 Nov 2022
Amount
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
Demolition of two way trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
Material and labour for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised, D-type, 125mm size, all as specified and directed.
Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.
Material and labour for 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.
Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified
Material and labour for 15mm thick cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.
Dismantling of brick tiles single layer as in roof covering all as specified and directed.
Demolition of mud in roofs any thickness including plastering and leaping (whether full thickness removed or only a part therof) removing surplus spoil out of defence land where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Material and labour for cleaning top surfaces of cement concrete by wire brushing and applying 15mm thick cement plaster in cement mortar (1:3) on concrete surface of roof slab complete all as specified.
Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed
Material and labour for APP based polymeric membrane minimum weighing 3.60kg/ sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed
Material and labour for cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, padding, roof kerbs or mud stops, coping etc rounded or chamfered on edges complete all as specified and directed
Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
Material and labour for chequered cement concrete tiles 25cm x 25cm x 20 to 22mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:3) complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tanks, 500 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed.
Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.
Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.
Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed, complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor fixed in repairs complete all as specified.
Supply and fixing vitreous china white wash down water closet pan with 'P' Trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed
Supply and fixing in repair CP jet spray with holder for EWC 1.5m long complete all as specified and directed
Demolition and breaking up drain pipes (Salt Glazed ware, AC or PVC) in event n.exc 150mm dia including all fittings complete all as specified and directed.
Supply and fixing cast iron soil, waste and vent pipes of size 100mm in any length with or without ears, with cement joints, laid in trenches or in floors fixed to wall complete all as specified and directed
Supply and fixing cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 110mm bore pipe complete all as specified and directed.
Supply and fixing 110mm bore cast iron vent cowls complete all as specified and directed.
Material and labour for cast iron trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
Supply and fixing 150mm dia cast iron gully trap setting and jointing with lead joint complete all as specified and directed
Supply and fixing in repair mild steel CP grating 125mm dia with centre hole all as specified and directed.
Supply and fixing PVC white low level flushing cistern 10 litre capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, PVC short bend etc. fixed on existing brackets fixed in repairs complete all as specified and directed.
Supply and fixing vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.
Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.
Supply and fixing in repair angle/stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed, complete all as specified and directed.
Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, size of urinal 59cm x 39cm x 37.5cm complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed.
Supply and fixing in repairs bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed.
Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed..
Removal of surplus spoil to a distance n. exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and directed
Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed
Surface dressing not exceeding 15cm deep in soft/ loose soil including removing bushes/ small trees etc complete all as specified and directed
Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/ loose soil, getting out, returning, filling in, watering and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.
Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc complete all as specified and directed.
Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.
Material and labour for 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed.
Material and labour for 20-25mm thick machine cut Kota stone slab and pre-polished 550mm x 550mm size on floor top, step etc over and including 15mm thick bedding layer CM (1:3) complete all as specified and directed
Material and labour for 20-25mm thick Kota stone slab in riser of steps, skirting, dado and pillar laid over cement screed and jointed in 15mm thick cement plaster in CM (1:3) rough finished surface complete all as specified and directed
Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.
S&F compound girder complete all as specified and as and stanchions, lattice girder, aerial masts, staging of water tanks and the like including caps, bases splices etc built up from two or more beam or channel section for angle with plates including all lattice bar stiffeners, gussets plate etc Fe-410 (Gde E-250) Quality-A complete all as specified and directed
Supply and fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
Supply and fixing Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed
Material and labour for anodised aluminium cabin having 100mm x 44mm x 3mm thick stile bottom rail and top rail including necessary fitting joinery cleat glaring packing snap beading 10mm x 10mm, 2 Nos of anodised aluminium handle 150mm size, 2 No chromium plated butt hinges 75mm size and 2 No 100mm long aluminium tower bolt etc including frame of section 100mm x 44mm x 3mm and including 5.5mm thick float glass and fixing complete all as specified and directed
Material and labour for powder coated aluminium anodised door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150mm x 44mm x 2.85mm thick middle rail 100mm x 44mm x 3mm thick stile and top rail including necessary fittings joinery cleat, glazing packing snap beading 10mm x 10mm, anodised aluminium handle 200mm long (02 No), 3 No 100mm size chromium plated butt hinges, 2 No 200mm size aluminium tower bolt and aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100mm x 44mm x 3mm and door shutter, bottom portion covered with 9 mm thick pre-laminated particle board, interior grade, pre-laminated on both sided with decorative choice lamination (colour/design approved by Engineer-in-charge) fixed to aluminium frame work and top portion covered with 5.0mm thick float glass and pattern. One mortice lock (Make: Harrison) with shutter and fixing complete all as specified and directed.
Material and labour for 100mm thick PCC (1:3:6) type C-1 (using 20mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed & directed.
Material and labour for 30mm sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, laid in floor/ path/ hardstandings in any pattern as approved, laid over complete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE.
Material and labour PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling, post holes, mass concrete, surface channels, drains and other similar works complete all as specified and directed.
Material and labour for Mild steel work wind tie etc for roof including securing bolt, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.
Supply and fixing MS chain link fencing 10 guage thick galvanised steel wire and 50mm x 50mm size mesh fixed to steel fencing post by nut & bolts etc including provision of binding wire complete all as specified & directed by Engr-in-Charge.
Supply and fixing mild steel in flat, round or square bars, in available lengths conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified.
Supply and fixing wall hung basin full padestal type with fixing accessories, size 610 x 465 x 275mm white, complete all as specified and directed. Make: Jaguar (QPS-WHT-7303PM) or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.
Supply and fixing central hole basin mixer popup waste system with 450mm long braded hoses, complete all as specified and directed. Make: Jaguar (SOL-6169B) or equivalent in 'Group 1' of Appendix 'B' to Particular Specifications.
Supply and fixing stainless steel railing of 75mm dia size pipes in horizontal and vertical directions all welded together, bend to shpae as directed and fixing both ends in floor and wall all as specified and directed.
Material and labour for cutting holes into for through brick wall exc. 150 sqm but n. exc. 400 sqcm built in cement mortar and making good in cement mortar (1:3) or concrete (1:2:4) type B-1 complete all as specified and directed.
Supply and fixing hermetically sealed single double leaf painted GI lead door, shutter thickness 45mm thick with 0.8mm thick GI shutter width of 45mm which is sealed and PUF insulated with 40 Kg/ Sqm density. Frame profile 100 x 50mm with 1.2mm thick GI lead 2mm thick led sheet embedded in the door leaf & door frame and making good around door. Accessories for door or as directed by manufacturer or as directed by Engineer-in-Charge :- (a) Standard arm door closer TS-1002 (Brand Dorma)-01 No. (b) Stainless steel ‘D’ type of handles on pull side 1 pair per leaf (c) SS ball bearing hinges 144 x 101 x 3.5mm per leaf (Brand Dorma)-04 Nos (d) One side key operated locking arrangement
Material and labour for preparation of new plastered or un-plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light and for taking credit of unserviceable light as per Sch of credit and making good disturbed surface walls, roof, floors etc with any type of civil work involved complete all as specified and directed
Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled by one switch complete all as specified and as directed.
All as per srl item No 87.00 here-in-before one socket outlet 5 Amp controlled by one switch on independent board.
All as per srl item No 87.00 here-in-before but One fan point controlled by one switch
All as per srl item No 87.00 here-in-before but with 2.5 Sqmm (nominal area) PVC stranded copper conductor cable 3 pin 15 Amp socket outlet with 2.5 Sqmm PVC insulated with stranded copper conductor cable for continuous earth continuity conductor independent board complete all as specified and directed.
Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.
Supply and fixing in replacement socket out let 5 Amp, 5 pin flush type complete all as specified.
Supply and fixing in repair ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.
Supply and fixing in repair batten holder ISI marked insulated body complete all as specified.
Material and labour in replacement sheet metal enclosure DBs when MCBs to be used, SPN 8 ways 240 V, with copper bus bar, double door, epoxy/ powder coated inside and outside with earth bar and neutral bar, prewired complete all as specified.
Supply and fixing MCB SP 6 to 32 Amps, B-curve, 10 KA complete all as specified and directed.
Supply and fixing MCB SPN 32 Amps, B-curve, 10 KA complete all as specified and directed.
Supply and fixing in repair MCB TPN 40 Amp, 240 volts,10 KA, C-curve complete all as specified.
Supply and fixing Deco Ultra Slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack 20 W LED 6000K with square decorative end caps complete all as specified and directed.
Supply and fixing energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaire with heat resistant glass and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 25mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's
Supply & fixing steel body exhaust fan, 380 mm sweep, 900 rpm (min), single phase, 230 volt, heavy duty, with loweres shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, including making the hole in wall incl necessary civil/ plastering work to match the disturbed surface complete all as specified and directed by Engineer-in-Charge.
Supply and fixing steel body exhaust fan, 300mm sweep, 900 RPM (min), single phase 230 Volts, heavy duty, with louvers shutter including provision of three core flexible cable of required length of size 23/.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washers, including making the hole in wall incl necessary civil/ plastering work to match the disturbed surface complete all as specified and directed by Engineer-in-Charge.
Supply and fixing air circulator fan, 450mm sweep, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers, making the hole in wall including necessary civil/ plastering work to match the disturbed surface complete.
Supply and fixing PVC body exhaust fan 250mm dia sweep, 230V, 50 Hz with louvers including cutting of hole in wall and making good to disturbed surface complete all as specified and directed
Supply and fixing in repair energy saving bulk head light luminaire with opal diffuser LED 10 watt 6000 K, power factor more than 0.90, IP-65 class-I protection with high efficiency BIS marked LED electronic driver, surge protection 2 KV, operative on 140 volts to 270 volts AC supply complete prewired, connecting and testing complete all as specified and directed. Notes:- (i) Contractor shall provide 2 years written warranty for the LED fixture complete including driver from the certified date of completion from the local office bearer of manufacturers. (ii) Contractor shall produce LM-79 and LM-80 Report of NABL accredited Laboratory from manufacturer. (iii) Products must be made in India only.
Supply, laying, jointing, testing and commissioning of LT cable XLPE insulated PVC sheathed, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 10 Sqmm 2 Core all as specified and directed
Supply, laying, jointing and testing XLPE insulated, PVC sheathed , steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed
Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and directed
Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed
Supply and fixing 40mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.
Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4 mm dia by means of nut, bolts, check nut & washer of galvanized iron and GI lead protected with protection pipe of GI light grade 15mm dia with thickness of not less than 15cm in alternate layers of charcoal and salt on all sides of earth plate with funnel with wire mesh and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and directed and testing on completion including PCC (1:3:6) type C-1 cover and frame, excavation and earth work and testing etc complete all as specified. Note : On testing, after completion of job, if desired earth resistance is not obtained the earthing shall be redone by the contractor without any extra coat to the department
Supply and fixing socket outlet multipurpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified
Material and labour in replacement sheet metal enclosure DBs when MCBs to be used, TPN 4 ways 415 V, with copper bus bar, double door, epoxy coated inside and outside with earth bar and neutral bar, prewired complete all as specified.
JAGDISH KUMAR SEHGAL
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .