Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹72.8 LAccepted-AOC | L1 | Accepted-AOC LOWEST AND REASONABLE | |
| 2 | L2₹74.7 L+₹1.9 L (2.66%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹76.5 L
EMD Value
₹1.4 L
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF SRIANGAR
CWE AF SRIANGAR
WORKS SERVICES FOR INSTALLATION OF STATIC AIRCRAFT ARRESTING GEARS AAGs AT AF STN SRINAGAR
2022_MES_550697_1
CWE(AF)sgr/sgr-23/2022-23
Open Tender
Civil Works
Item Rate
365 days
AF SRINAGAR
AS PER NIT
8 documents required · 8 mandatory
₹1,000
GE P AF SRINAGAR
₹1.4 L
Yes
4 May 2023
8 Sept 2022
8 Dec 2022
8 Sept 2022
6 Dec 2022
22 Nov 2022
Amount
Road/Hard Standing/Culvert
Excavation over area not exceeding 1.5m deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation over area exceeding 1.5m and not exc 3.0m deep and getting out in soft/loose soil, complete all as specified and directed.
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.
Surface dressing not exceeding 15cm deep soft/loose soil, complete all as specified and directed.
Plain cement concrete (1:4:8) type D-2 using 40 mm grade stone aggregates as in foundation filling and mass concrete or in sub base of floors, complete all as specified and directed.
RCC (RMC) Design Mix M-35 in foundation including raft footing, foundation beams, plinth beams, bases for column etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.
RCC (RMC) Design Mix M-35 in Beams, cantilevers, lintel columns pillars, piers, posts, struts, chullah hoods, stair case, arches, domes, vaults, shell roofs, arch ribs folded plates, slabs, balconies, canopies, deck slabs etc, or in similar articles, complete all as specified and directed.
Use and waste wooden form work fair finished surfaces to sides of concrete fdns & footing sides, complete all as specified and directed.
Formwork to edges of concrete flats with fair finished surfaces treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work not exc 5cm wide, complete all as specified and directed.
Formwork to edges of concrete flats with fair finished surfaces treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide, complete all as specified and directed.
Formwork to edges of concrete flats with fair finished surfaces treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.
Mild steel 10mm dia and over TMT bars, as in reinforcement cut to length bent to shape required including cranking hooking at ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as shown on drawing.
All as per ser item No 1.12 here-in-above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
Material and labour for MS plate Fe 410-W (Gde E250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment to provide any shape and any size as per site requirement, complete all as specified and directed.
Material and labour for preparing of newly untreated horizontal concrete or bituminous surfaces exceeding 10cm width or girth with wire brushed etc and painting lines, dashes, strips, circles and other marking with two coat of water thinable/matt finished road marking paint white/orange/yellow/Red or any other colour as approved, complete all as specified and as directed.
Supplying and laying of CPVC pipe 250mm inner diameter with CPVC Schedule 40 pipes & plain Schedule 80 fittings as a fair lead tube all as specified and as shown on drawing.
Hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as shown on drawing.
Material and labour for 75mm thick cement concrete 1:3:6 (40mm graded aggregate) in sub base, floor and pavings, complete all as specified and directed.
Material and labour for 100 mm thick plain cement concrete (1:2:4) type B-1 (20mm graded stone aggregate) in floor, finished even and smooth without using extra cement, complete all as specified and as directed.
Material and labour for finishing plinth walls with White Acrylic smooth exterior paint for new work (Two or more coat applied @ 1.67 ltr/10sqm over and including priming coat of exterrior primer applied @ 2.20 kg/10Sqm), complete all as specified and directed.
Material and labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application, complete all as specified and directed.
Material and labour for Hand packing (any thickness) of broken stone and boulders at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed.
Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A' for thickness 250mm, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.
Removing excavated material to a distance exceeding 500 meters but not exceeding 1.0 KM and depositing where directed at a level not exceeding 1.50 meter above the starting point, complete all as specified and directed.
Material and labour for concrete slab of cuboid shape of dimensions of 750 x 750 x 300mm using 12.5mm crushed aggregates, complete all as specified and directed.
Material and labour for core cutting in the cuboid shape of dimension 750 x 750 x 300mm, complete all as specified and directed.
Elect Supply
Supply and fixing Bi-directional high intensity inset runway Edge light 105W C/Y with 12 inch shallow base, necessary gaskets, sealants, etc including removal of old items complete and depositing the dismantled/unsv material with MES/IAF (Part No.INL-RE-2X105W-WY-SC-1C IDM-6688-1. Make : SAFEGATE or eqvt
Supply and fixing AFLS Primary cable 5 kV, XLPE insulated single core 8.35 sqmm, multi-stranded, copper conductor including removal of old items complete and depositing the dismantled/unsv material with MES/IAF. Make : NEXANS or eqvt
Supply and fixing AFLS Secondary cable 1 KV, rubber insulated, twin core 2.5 sqmm multi-stranded, copper conductor including removal of old items complete and depositing the dismantled/unsv material with MES/IAF. Make : NEXANS or eqvt
Supply and fixing CI Box for Trf housing including removal of old items complete all as per sample and depositing the dismantled/unsv material with MES/IAF.
Supply and fixing End Joint kit for AFLS secondary cable (plug & receptacle type, both inclusive) including high adhesion insulation tape over joint for necessary moisture sealing complete. Make : EFLA or eqvt
Supply and fixing End Joint (Connector kit) for AFLS primary cable (plug & receptacle type) including HT Tape over the joint followed by high adhesion insulation tape for necessary moisture sealing complete. Make : EFLA or eqvt
Material and labour for laying of HDPE Conduit PN-12.5 size 40mm inner dia with wall thickness of min 3.7mm suitable for laying of single core underground Cable upto 8.35 sqmm, 5 KV complete all as specified and directed.
Material and labour for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.
Excavating in trenches, not exc 1.5 m wide and not exc 1.5m in depth; for foundation, cable/pipe laying etc. in soft/loose soil and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm.
Removing excavated soil material to a distence not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point.
Material and labour for Chemical earthing with copper earth plate 90x60cmx5mm & copper earth strip 50x6mm or eqvt round solid conductor duly insulated with rigid PVC conduit (Machinery - 4, Electric panel - 4), complete all as specified and directed.
Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core including SS/GM glands at terminations, complete all as specified and directed.
Material and labour for river sand for masonary mortars / cable cushioning including spreading & levelling, complete all as specified and directed.
Supply and laying Bricks, common burnt clay building bricks, sub-class ‘B’, complete all as specified and directed.
Material and labour for Galvanised steel tubes 50mm bore, light grade for cable protection, complete all as specified and directed.
Supply and fixing LT panel outdoor type factory made cubical type with front and rear door openings made out of 3.15mm MS sheet, powder coated with metering & accessories prewired, over ISA4040 base frame with 60cm legs including suitable PCC pedestals, connected earthwork, foundation etc.suitable to accommodate and including following : a) MCCB 63 Amps, 25 KA 4 pole - 01 No b) Aluminium bus bar 100 Amps TPN 50cm long
Supply and fixing Aviation obstruction light luminaire LED type, IP-65, 240Vac raised upto 3m over the base/hut using GI pipe 25mm dia bore light grade, complete all as specified and directed. Note: Rate quoted by the bidder shall be deemed to be inclusive of the cost of pipe, fixing arrangement, etc. Make: BGAV 302 LED, Bajaj or eqvt
Material and labour for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of upto 150 mm dia suitable for 0.4 MPA (Blue/Green/Yellow colour) working pressure, complete all as specified and directed. Note : Make/model of items for Air Field Lighting System, cabling and accessories are to be pre-approved by GE as per site requirement.
Area Drainage
Excavation in trenches, not exc. 1.50m wide and not not exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil, complete all as specified and directed.
Material and labour for PCC 1:2:4 type B2 (40mm graded aggregate) in surface channels and drains, complete all as specified and directed.
Removing excavated material to a distance exceeding 500 meters but not exceeding 1.0 KM and depositing where directed at a level not exceeding 1.50 meter above the starting point, complete all as specified and directed.
M/S A.R.TANTARY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .