Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
28 Sept 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
CLW
90 days
Expenditure
General
63
3 conditions
Preferably manufacturers should participate. Participating traders/agents must provide authorization letter issued by the OEM. Authorization letter should preferably be tender specific. In case of general authorization letter, it must clearly indicate the validity period/expiry date. Offers with general authorization letter silent on validity period/expiry date will not be considered for placement of order and that offer is liable to be ignored. Bidders must submit authorization letter along with their offer failing which the offer is liable to be ignored. For orders placed on dealers/traders/agents, documents certifying that the material is sourced from the OEM/OEM authorised dealer will have to be produced by the firm at the time of bidding.
This item reserved for procurement through CLW approved sources only.
The Purchaser reserves the right to procure either entire or bulk quantity (minimum 80% of Net Procurable Quantity) from the CLW Approved Vendors as available on U-VAM for Item ID:2100498. The approval status of the firm for the said item will be reckoned as on the date of tender closing and not thereafter. But, in case of downgrading/removal/suspension/banning etc. after opening of tender, such changes shall be taken into account while considering the offers. Bidders should submit documentary evidence failing which offer is liable to be ignored. The offers from developmental vendors" may be considered for developmental orders totalling up to 20% of the net procurement quantity. Ref: Clause 3.0 of Section II of CENTRAL Railway BID DOCUMENT (Updated Latest).
16 conditions
FREE AT DESTINATION
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
BY CONSIGNEE
Test & Warranty certificate of OEM to be submitted at the time of supply of material to consignee.
Offers will be evaluated strictly as per the eligibility criteria as defined under para ELIGIBILITY CONDITIONS : Special Eligibility Criteria of this tender document. Any other eligibility criteria if mentioned anywhere in any of the uploaded documents will have no relevance with respect o evaluation of the bids.
1 location across Maharashtra · 300 Set total
SET OF HARDWARE FOR WAG9/WAP7
63265035D~CR
63265035D
Open - Indigenous
Goods
Maharashtra
₹0
Exempted
28 Sept 2026
7 Sept 2026
3 items · 300 Set total
Set of hardware for WAP-7 loco suspension tubes (one set consisting of 5 items 100 nos) as u nder: 1) Socket head cap screw Size M12x30 full threaded as per DIN 7984, property class 8.8 to ABB Drg. No. IB012-00761, Qty-32 Nos. (2) Socket head cap screw Size M6x20 as per DIN 912 Property class 12.9 to ABB Drg. No. 182.00620-20 Qty- 02 Nos. (3) Hex head screw M12 x 40, Property class 8.8 to IS: 1367 Qty- 16 Nos. (4) Safety washer VS 6 to CLW Drg. No. 1209 01 411 046 Article No. 001. Qty-02 Nos. (5) Safety wa sher VS 12 to CLW Drg. No. 1209 01 411 046, Article No. 004 Qty-48 Nos. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER(ARNO) TMW NKRD, CR | Maharashtra | 100.00 Set |
| Total | 100 Set | |
Set of hardware for WAG-9 loco suspension tubes (one set consisting of 5 items 100 nos) as under: 1) Socket head cap screw Size M12x30 full threaded as per DIN 7984, property class 8.8 to ABB Drg. No. IB012-00761, Qty-32 Nos. (2) Socket head cap screw Size M6x20 as per DIN 912 Property class 12.9 to ABB Drg. No. 182.00620-20 Qty- 02 Nos. (3) Hex head screw M12 x 40, Property class 8.8 to IS: 1367 Qty- 16 Nos. (4) Safety washer VS 6 to CLW Drg. No. 1209 01 411 046 Article No. 001. Qty-02 Nos. (5) Safety wa sher VS 12 to CLW Drg. No. 1209 01 411 046, Article No. 004 Qty-48 Nos. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER(ARNO) TMW NKRD, CR | Maharashtra | 100.00 Set |
| Total | 100 Set | |
SET OF HARDWARE FOR WAG9/WAP7 LOCOS SUSPENSION TUBES (ONE SET CONSISTING OF 5 ITEMS 100 NOS) AS UNDER: 1) SOCKET HEAD CAP SCREW SIZE M12 X 30 FULL THREADED AS PER DIN 79 84, PROPERTY CLASS 8.8 to ABB DRG NO. IB012-00761 QTY- 32 NOS. 2) SOCKET HEAD CAP SCREW SIZE M 6 X 20 AS PER DIN 912 PROPERTY CLASS 12.9 to ABB DRG.NO.182.00620-20 QTY- 02 NOS. 3) HEX HEAD SC REW M12 X 40, PROPERTY CLASS 8.8 IS:1367 QTY-16 NOS. 4) SAFETY WASHER VS 6 to CLW DRG.NO.1209 01 411 046 ARTICLE NO.001 QTY- 02 NOS. 5) SAFETY WASHER VS 12 CLW DRG.NO.1209 01 411 046, ARTIC LE NO.004 QTY- 48 NOS. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SR. SECTION ENGINEER(ARNO) TMW NKRD, CR | Maharashtra | 100.00 Set |
| Total | 100 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5699427.pdf
ATTACHMENT
5689309.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .