85848/E8,SPECIAL REPAIR TO POWER HOUSE P6 AT AF STN JAIPUR

Amount

Taking down cement plaster on brick or stone walls, RCC ceiling etc. including raking out joints, hacking for keys, scrubbing down with water, etc all as specified and as directed in Engineer-in-charge.

M&L for rendering 15 mm thick in CM 1:4 on stone masonary or surface other than fair face of brick works etc or similar surfaces and making surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on brick works, concrete surfaces or similar surfaces and making surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on concrete surface in ceillings complete all as specified and directed.

M&L demolition of Concrete(un reinforced)in ground floor and pavings n exc 15 cm complete all as specified and directed.

M&L demolition of Concrete(un reinforced)in ground floor and pavings exc 15 cm thickness but above ground floors etc complete all as specified and directed.

M&L demolition of RCC chajja, landings, beams etc complete all as specified and directed.

M&L Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) avg. 40 mm thich in levelling course for laying floor finish complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 10mm cement mortar screed base (1:6) thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and as directed by Engineer - in-charge.

M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc over screed bed of cement mortar 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L Glazed ceramic tiles in vertical surfaces 450x350x7mm thick over cement mortar(1:4) backing coat 10 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed (1:4) and jointed jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and as directed by Engineer -in-charge.

M&L upto 6m height from ground including neccessary suttering and form work for applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster surface preparaion etc and applying RCC (1:1.5:3) OR 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing surface of ceiling, beams, chajja and alike complete all as specified & directed.

M&L making V groove at the junction of roof and wall applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1 (Nitobond SBR 45) : 1(water) : 3 (OPC) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface including removal of loose / disintegrated old concrete / plaster surface preparaion etc and applying RCC (1:1.5:3) OR 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45 ) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50 KG Cement with 13 litre water addition, finished surface to match with existing surface of ceiling, beams, chajja and alike complete all as specified & directed.

S&F in position 10mm dia and above TMT steel reinforcement of approved make including cutting, bending, fabricating, making dowel, hooks rings providing spacer, plastic or steel chairs including binding, welding if required including wastages etc. complete all as specified & directed.

Description all as per Srl Item No.15 here-in-before but 6mm to 8mm dia TMT bar etc complete all as specified and directed.

M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) all as specified by Engineer -in- charge.

Demolition for Brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

Taking down Chowkatts or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed.

Taking down Chowkatts or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc complete all as specified and directed.

S&F Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and directed.

S&F 5.5 mm thick tinted sheet glass and glazing, fixed in aluminium frame n exc 0.5 sq.m in each pane in square/ rectangle shape and size cutting and fixxing etc complete all as specified and directed.

S&F 4.8 mm thick black filmed ordinary quality sheet glass glazing in aluminum shutters n.exc .5 sqm each pane in square/ rectangle shape and size cutting and fixxing etc complete all as specified and directed.

-Ditto- item no.25 but exc 0.5 sq.m in each pane etc complete all as specified and directed.

S&F for Aluminium wire cloth 0.45 mm nominal dia of wire and average width of apparture 1.4mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed etc complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F 100 mm butt hinges medium weight stainless steel ISI marked etc complete all as specified and directed.

S&F 150 mm long Aluminium handles cast type anodised etc complete all as specified and directed.

S&F 200 mm Alumunium anodised barrel tower bolt of extruded section fixed etc complete all as specified and directed.

S&F 300 mm aluminium alloy, anodised sliding door bolts with haps and staples staples bolt types and fixing clips of sheet ,cast and extruded sections and fixing bolts of extruded sections or cast alumunium alloy and fixed etc complete all as specified and directed.

S&F in repair size 450x300mm Vitreous China wash basin, white, flat back, excluding ditto but including brackets etc complete all as specified and directed.

S&F in repair Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed.

S&F for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F 32mm Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as specified and directed.

S&F Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) etc complete all as specified and directed.

S&F 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) for wash hand basin etc complete all as specified and directed.

S&F 15mm CP stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair etc etc complete all as specified and directed.

S&F in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including P trap 100 mm, including connection to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

M&L low level flushing cistern 10 Ltr capacity white complete with inlet ball valve float , syphon assembly, handle including brackets etc etc complete all as specified and directed.

Dismantling water tanks Exc 250 & n exc 500 ltrs capacity and removing to store etc complete all as specified and directed.

Dismantling water tanks Exc 500 & n exc 1000 ltrs capacity and removing to store etc complete all as specified and directed.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position over 100mm thick PCC (1:2:4) using type Bq, 20mm graded stone aggregate in tank platform all as specified in SSR Part I.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position over 100mm thick PCC (1:2:4) using type Bq, 20mm graded stone aggregate in tank platform all as specified in SSR Part I.

M&L 20mm Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and directed.

Taking up or down steel tubing 15mm and connections, including cleaning for re-fixing or removal to store etc complete all as specified and directed.

Taking up or down steel tubing 20 mm and connections, including cleaning for re-fixing or removal to store etc complete all as specified and directed.

M&L 15mm Tubes, 'Md grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

M&L 20mm Tubes, 'Md grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.

S&F 20mm Gun metal globe or Gate valves with iron wheel head screwed both ends for iron pipe concealed and fixed etc complete all as specified and directed.

S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm etc etc complete all as specified and directed.

S&F in repairs 15mm bib taps fancy type cast copper alloy CP with crutch of butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc complete all as specified and directed.

S&F in repairs 15mm Stop valves fancy type cromium plated with long shank and cup (consealed Type) screwed both ends for iron pipe and fixed etc complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and directed.

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in grating 100 mm dia of PTMT (Min Wt 25 gms) etc complete all as specified and directed.

S&F in repair vitrous china Urinal, full/half stall type, white (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed. Make:- Hindware/Perryware or equilent.

M&L PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F PVC (SWR) floor trap of 75 mm dia outlet plain with grating including jointing with solvent cement etc complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75mm dia etc complete all as specified and directed.

S&F 110mm PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia etc complete all as specified and directed.

S&F 110mm PVC (SWR) vent cowl etc complete all as specified and directed.

S&F 110mm PVC (SWR), junction double, (double T), equal or unequal etc complete all as specified and directed.

S&F 100mm Cast iron soil, waste and vent sand cast pipes, in any length with or without ears with cement joints, laid in trenches or in floors etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F Steel rolling shutters of 1.25 thickness of laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type etc complete all as specified and directed.

M&L for New or previously untreated surfaces of new surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of Synthetic enamel (ordinary tint) paint all as directed by Engineer-in- charge.

M&L for Welded steel wire fabric supplied n exec 4 Kg per Sqm and fixed complete to wood or steel members etc complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, GDE Fe 410-S fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) for supporting of kota stone laid beside the drains and as directed by Engineer- in- charge.

M&L 9 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and directed.

M&L Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive,fixed with screws to timber frame work etc complete all as specified and directed.

S&F in repairs Mild steel, plain black sheet 1.60mm thick in hearths; covering to door shutters; covering to door chowkats (frames); chullah hoods; waters tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets,etc. as required etc complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and directed.

S&F stack clams out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 110mm dia pipe etc complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as plinth protection/hard standing finishing surfaces even and smooth with out using extra cement etc complete all as specified and directed..

Demolition of Concrete padding from roof including unserviciable tarfelt etc complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-1, using 20mm graded stone aggregate as in padding, finished slope of 1:40 for making bond with RCC slab etc complete all as specified and directed.

M&L 10mm thick plaster in CM (1:4) with water proofing compound @ 3% by weight of cement be applied on paddding concrete when concrete is till green etc complete all as specified and directed. Note:- Water proofing compound measured and paid separately.

Supply only water proofing compound etc complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. Not less than 150 gms/sqm) land over bitumen primed surfaces by Torch application etc complete all as specified and directed.

M&L for complete removal of existing treatment from ceiling and applying three coat of white wash on undecorated surface complete all as specified and directed by Engineer- in- charge.

M&L for Complete Removal of existing treatment from wall or similar surfaces preparation of old decorative plastered unplastered surfaces and applying two coats of distempering on walls with distemper oil emulsion, white or tinted over a coat of chalk whitining on plastered sufaces etc complete all as specified and directed.

M&L for Complete Removal of existing treatment from wall or similar surfaces applying two coats of cement based paint on walls in different patterns shade including preparation of old decorative surfaces etc all as specified and as directed by Engineer-in-Charge.

S&F cast iron manhole cover, drain cover and the same etc complete all as specified and directed.

S&F spikes Galvanized single sheet steel bird spikes attached to bldgs ledges, balconies, ledges, neams, rafters, railings, windows, gutters, roof perimeters etc completed all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats distempering on walls with distemper oil emulsion, white or tinted over a coat of chalk whitining on plastered sufaces etc complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc complete all as specified and directed.

M&L in replacement for concealed point wiring by using 1.5 Sqmm PVC insulated unsheathed copper conductor multistrand drawn in new terminal pvc modular metal flush box and PVC rigid non metallic conduit medium density ISI marked fixed with all fittings and all accessories i.e. modular white cover with plate suitable for mounting of modular switches and socket complete for one light/fan point controlled by one switch including provn of 1.5 sqmm PVC insulated copper conductor continues as earth wire connected to earth dolly complete all as specified and directed by Engr-in-Charge. Note:- Switches, sockets etc shall be measured and paid seperately .

-Ditto-as per item no.94 above but for one 5 Amp socket outlet independent etc complete all as specified and directed.

-Ditto-as per srl item no.94 here-in-before but for one socket outlet 5 Amp on same board etc complete all as specified and directed.

-Ditto-as per item no.94 above but for one 15 Amp socket outlet independent with 2 run of cable of size 2.5 sq mm and one run of 1.5 sq mm cable as earth continuity complete all as specified and directed by Engineer-in-Charge.

S&F switch modular type 1 way 6 A, 240 volts etc complete all as specified and directed.

S/F for modular switch socket combination 2 in 1 , 5 pin 5 Amps flush type etc complete all as specified and directed.

S/F for modular switch socket combination 2 in 1 , 5 pin 15 Amps flush type etc complete all as specified and directed.

S&F E-LITE LED 18W Decorative ultra slim linear LED LIGHTING FIXTURE with extruded Al . heat sink, environmental friendly, energy efficient ready to use pack. of including tube rod making electric connection from ceiling rose to tube light fitting complete all as directed in Engineer- in- charge . Make:-cat part no.of Havells LHEXBLP7PN1W018

S&F Lamp Holder,in replacement of PVC / Polycarbonate type,with back plate for batten fittings with one PVC block of size 75mmX75mm for mounting the fitting includingwith LED 1X9 watt etc complete all as specified and directed. Make:- Havells/Philips.

S&F ceiling fan regulator elecronic step type including connection etc complete all as specified and directed.

Repair/servicing of existing of exhaust fan of 600/450 mm sweep including bush shaft, rewinding etc complete refixing same with electrical connection etc complete all as specified and directed.

S&F PVC rectangular block (10 x 10 x 5) Cm depth with 3mm thick plastic sheet top cover etc complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals etc complete all as specified and directed.

Dismantling and taking down Electric distribution board inclluding MCBs and Isolators of any type or size and close space by brick work plastering matching with existing colour etc complete all as specified and directed.

S&F in replacement sheet metal enclusure for DBs when MCBs to be used single pole and neutral 4 way with 200 Amps rated bus bar, 240 volts fixed sunk / flush to the wall etc complete all as specified and directed.

-Ditto- as item no. 108 but for 8 way etc complete all as specified and directed.

S&F in replacement sheet metal enclusure for 4 way TPN DBs double with provision as TPN MCCB use as incoming with 200 Amps rated bus bar, 420 volts etc complete all as specified and directed.

S&F MCCB 4 pole 63 Amps etc complete all as specified and directed.

S&F MCB SP, 240V, 6-32 Amps etc complete all as specified and directed.

S&F MCB SPN, 240V, 6-32 Amps etc complete all as specified and directed.

S&F MCB TPN 32 Amp 415 V etc complete all as specified and directed.

S&F wiring for circuit/submain wiring 2 X 2.5 sqmm alongwith 1.5 sqmm earth wire single core cable of FRLS, PVC insulated copper conductor multi stranded, in PVC conduit on surface/ recessed as required etc complete all as specified and directed.

-Ditto- as item no.115 but for wiring 2 X 4 sqmm alongwith 2.5 sqmm earth wire single core cable etc complete all as specified and directed.

-Ditto- as item no.115 but for wiring 2 X 6 sqmm alongwith 4 sqmm earth wire single core cable etc complete all as specified and directed.

S&F, laying, testing 1100 volts grade heavy duty cable PVC/XLPE insulated, stranded aluminium conductor served with inner sheathing of PVC tape, armoured with GI steel or tape and over all PVC sheathing laid in trenche, pipe , floor and under roads etc of size 10 sqmm 2.0 core etc complete all as specified and directed.

S&F in replacement LED security light 35 Watt watt 5700K, made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, long life IP65 roadway luminaire and electronic driver including 1 mtr long 25 mm dia GI pipe suitable shape complete all as directed by Engineer-in Charge. Make :- Havells cat part No LHETBXU7PAIS035 or equivalent in Bajaj/ Crompton Greaves.

S&F in replacement LED flood light 70W 5700K with WSPD, made up of pressure die cast housing with toughned glass and individual high power LEDs with archtectural facade, long life IP65 luminaire and electronic driver including fixing arrengement of iron sheet, clamp nut bolt complete all as directed by Engineer-in Charge. Make :-Havells cat part No LHETBXU7PA7B070 or equivalent in Bajaj/Crompton Greaves.

S&F in repair insulators for supporting earthing strip on wall/floor etc complete all as specified and directed.

M&L in repair Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth strip of size 25x4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point etc complete all as specified and directed.

M&L for Air termination, 5 pointed, copper rod 15mm dia and 900 mm long with suitable fixing arrengement etc complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 20x3 mm copper strip with ceramic spacer WITH interval of 1 mtr etc complete all as specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screwed etc complete all as specified and directed.

M&L for Earthing complete with copper earth plate electrode 60×60cm.×3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to copper strip of 20x3 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion etc complete all as specified and directed.

Ravi Enterprises