e-NIT No. 91 of 2022-23 Constt.

Amount

Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 Cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) including all lead lift carriage complete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% boulder including all lead lift carriage complete

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 insuper structure Cement mortar 1:6 ( 1 cement : 6 fine sand) including all lead lift carriage complete

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 co.:Hse sand 4 graded stone aggregate 20mm nominal size i Nallah including all lead lift carriage complete

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors,balconies, landings and staircase having upto 15° slope. excluding cost of centering and shuttering ,all work upto floor V level including all lead lift carriage complete

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Centring and shuttering including strutting, propping, etc.and removal of form for suspended floors, roofs, landings, balco-nies and access platform with water proof ply 12mm thick

Centring and shuttermg including strutting, propping etc. and removal of form for· Foundations: footings, bases of columns etc. for mass concrete.

Centring and shuttermg including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and centilevers.

6mm Cement plaster of mix: 1 : 3 ( 1 cement : 3 fine sand) including all lead lift carriage complete

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) including all lead lift carriage complete

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) including all lead lift carriage complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 500x500 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades,in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 500x500 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing 1st quality ceramic glazed floor tiles conformingtoIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Rate for thickness of shutter in mm per sqm Deodar wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 1 Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary 35 second class Deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35mm

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth Crushed

Providing and applying white cement based putty of specified thickness of approved brand and manufactrurer over the plastered wall surface to prepare the surface even and smooth compleet 1mm thick

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade

Finishing walls acrylic smooth extreior paint required shade on New work (two or more coats applied @ 1.67 ltr/10Sqm over and inluciding priming coat of exterior primer applied @ 2.20kg/10Sqm

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite Work

Painting top roofs with bitumen of approved quality 17KG per 10 Sqm impregenated with a cost of caorse sane at 60 cudm per 10 sqm including cleaning the slab surface with brushed and finally with a piece of cloth lightly soacked in kerosene oil completed with residual type petroleum bitumen of grade VG 10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick tiles of class designation 10.0

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diameter

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 110 mm diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings

Providing and fixing PVC /supreme brand heavy pipes 100mm

Providing and fixing PVC/supreme brand heavy pipes 75mm

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore medium

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 20 mm dia. nominal bore medium

Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.a) 15 mm nominal bore

Providing and installation of Jet of approved brand

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder C.P. brass

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thicknesscomplete

Providing and fixing bright /matt finished Stainless Steel handles of approvedquality & make with necessary screws etc all complete. 125 mm

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 75 mm

Providing and fixing Door bend of supreme brand heavy

Providing and fixing Plainr bend supreme brand heavy

Providing and fixing T 100mm x 75mm

Stainless steel kitchen sink-withou~ drain board 610 x 510 mm bowl depth 200 mm

Providing and fixing PVC waste pipe including PVC waste fittings complete 32mm dia.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing 100 mm Stainless steel grating for gully, floor or Nahani trap.

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Square shape 350mm internal dimensions

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed fitting arrangements, weighing not less than 1 06gms.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls 20mm nominal bore, 120mm long, weighing not less than 198gms

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.200x10 mm

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.150x10 mm

Providing and fixing lSI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etccomplete.100x10 mm

Providing and fixing of sliding bolt 150mm

Providing and fixing of sliding bolt 200mm

Providing and fixing Hinges 100mm x 10mm

Providing and fixing Hinges 75mm x 10mm

Providing and fixing of Steel I -Hook 100mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to steel windows by welding

Providing and fixing Service Line(Aluminium 10 sq m)

MCB 6-32 Amp.

MCB 6-40 Amp.

Providing and fixing Wiring for light point/exhaust fan point/ ceiling fan point /heating pointwith 1.5/2.5/4 sqmm FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit,with modular switch,modular plate suitable GI box as required. Make:- Anchor/Havells or equvalent.

6 Module (200mmx75mm)

6 pin 15/16 A socket outlet & 15/16 A Switch

5 pin 5/6 socket outlet & 5/6 switch

Providing and fixing suitable size 3 Module GI Box with modular plate and cover infront including providing 5 pin 5/6 A modular switch/socket including connection etc. as required. Make:- Anchor/Havells or equivalent.

Providing and fixing following 5 pin 5/6 A modular switch/socket on the existing modular plate and switch box including connection etc as required. Make:- Anchor/Havells or equivalent.

Providing and fixing 5 inch dia fan box/concealed box with round sheet cover for covering the base and bottom and dual painted with red oxide ,Make:- Anchor/Indoasian/Havells or equivalent

CFL saver 14 watt of approved quality Make:- Anchor/Havels/Orient etc

Providing,Installation,testing and commissioning of cieling fan . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Providing,Installation,testing and commissioning of Exhaust 450 mm dia. Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Providing,Installation,testing and commissioning of Gyser of 25 lt . Size of Bajaj, Orient, Khaitan, Usha or Polar brand and manufacturers.

Jai Singh Manhas

BIDHEE SINGH

MOHINDER LAL GANGAL

Sanjay Kumar Gupta

harbans Lal

AVINASH SHARMA

Mahesh Kumar

M/S ROSHAN LAL