Providing Safety Gaurd to Palakkarai roundabout in Virudhachalam Municipality

Earth work excavation and depositing on bank within initial lead of 10 M and initial lift of 2M in hard stiff clay, stiff black cotton, soil, hard red earth, shales, murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS 20B for foundation.

Supply and Collection of fine river sand for basment Filling,including cost and conveyance of sand laboure charges for filling in layer by layer, each layer not exceeding specification.15cm thick, etc. complete.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. -Mixing by manual means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including Super Plasticiser, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers - manual mix

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Brick work in following Cement Mortar using best quality of Country Bricks of size 8-3/4" x 4-1/4" x 2-3/4"for foundation and basement including curing, etc., complete complying with standard specifiction.

Plastering cement mortar 1:5 mix 12mm thick including cost and conveyance of all materials from approved quarry and including all other labour charges etc., completed as per standard specification.

Painting New Plastered Wall Surface with Three finishing coats of ready mixed (Emulsion)of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specificationand as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting, Priming Coat on new Iron work of approved quality and colour in all floors including the cost of primer etc., etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) (SUB-DATA)

Manufacturing, supplying and fixing of Model Gopuram of Virudhagrishwarar Temple cement statue design specifications involve using durable, often black, powder cement for hand-built sculptures, with dimensions and materials customized to the specific deity and architectural style. Key elements include detailed artistic and religious accuracy, such as correctly forming facial features, hair, and iconic symbols like the trident for Shiva. The process typically uses wire mesh for creating molds from paper templates, followed by pouring and solidifying the cement mixture to achieve the desired form and detail, ensuring a strong, long-lasting final product that can last for decades with proper sealing and care,Sketching & Templating: Start with paper cutouts to sketch facial features, which are then taped to a cylindrical foundation to test size and symmetry, Molding: These paper templates are used to create wire mesh molds, with extra mesh providing depth for the features, , Assembly: The wire mesh molds are secured to the foundation, Cement Application: Cement is then poured and allowed to solidify into the desired form, Material:Primarily uses cement, with black powder cement being a common type for certain statues,Durability:The statue should be made with high-quality cement and a thick construction to ensure it lasts for decades, Designs can range from traditional to contemporary, though contemporary designs may still adhere to certain cultural or religious themes etc., All the members are finshed with Painting New Plastered Wall Surface with One finishing coats of ready mixed (Emulsion) complete and as directed by the departmental engineers

ADD GST 18 %

Please Enable Macros to View BoQ information