Loading
Loading…
Loading…
Tender Value
₹43.2 Cr
EMD Value
₹23.1 L
Closing Date
23 Apr 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
WORKS
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Definition of similar works: 1.Any Bridge work involving RCC work and other Misc. works - (Value of component is Rs.33.79Cr) AND 2.Any Bridge work involving superstructure with structural steel having span of 12.20m or more (Value of structural steel component in superstructure - Rs.8.13 Cr.) AND 3.Any Bridge work involving superstructure with PSC work having span of 12.20m or more (Value of PSC component in superstructure-Rs.1.31 Cr.)
87 conditions · 4 needing a document upload
In case of Proprietary Firm / Proprietary Concern, the tenderers shall scan and submit with his offer (i)An undertaking that he is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which he was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (ii)All other documents in terms of explanatory notes in clause 10 of IRSGCC - April-2022-Part-I. (iii)All other documents as per Clause 14 of IRSGCC - April-2022- Part-1.
In case of Partnership Firm, the tenderer(s) shall scan and submit with their offer, the following documents: (i)A notarized copy of partnership deed or a copy of partnership deed registered with registar . (ii)A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract (iv)Other documents as mentioned in terms of para 10 tender form (2nd sheet) of IRSGCC April-2022- Part I. (v) All other documents as per Clause 14 and Clause 18 of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a Company, the tenderer(s) shall scan and submit with their offer, the following documents: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)An undertaking that the Company is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which the Company was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (v)All other documents in terms of para 10 of tender form (2nd Sheet) of IRSGCC-2022 (vi) All other documents as per Clause 14of IRSGCC -April -2022- Part 1.
In case, the Tenderer is a JV Firm, the tenderer(s) shall scan and submit with their offer the following documents: In case one or more of the members of the JV is/are (A)Partnership firm(s), following documents shall be submitted: (i)A notarized copy of the Partnership Deed or Copy of partnership deed registered with registar , (ii)A copy of consent of all the partners or individual authorized by partnership firm, to enter into the Joint Venture Agreement on a stamp paper, (iii)A notarized or registered copy of Power of Attorney in favour of the individual to sign the MOU/JV Agreement on behalf of the partnership firm and create liability against the firm. (iv) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. In case one or more members is/are (B) HUF, the following documents shall be enclosed: (i) A copy of notarized affidavit on Stamp Paper declaring that his concern is a proprietary concern and he is sole proprietor of the concern or he who is signing the affidavit on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. In case one or more members of the JV is/are (C)Companies, the following documents shall be submitted: (i)A copy of resolutions of the Directors of the Company, permitting the company to enter into a JV agreement, (ii)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (iii)A copy of Certificate of Incorporation (iv)A copy of Authorization/copy of Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender, sign MOU/JV Agreement on behalf of the company and create liability against the company. (D) In case one or more members of the JV is/are LLP firm/s, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation of LLP(iii) A copy of resolution passed by partners of LLP firm, permitting the Firm to enter into a JV agreement.(iv) A copy of Authorization /copy of Power of Attorney issued by the LLP firm (backed by resolution passed by the Partners) in favour of the individual, to sign the tender and/or sign the MOU/ JV agreement on behalf of the LLP and create liability against the LLP. (v) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In case one or more members of the JV is/are Society/s or Trust/s, the following documents shall be submitted: (E)A copy of Certificate of Registration
i)A copy of Memorandum of Association of Society/Trust Deed A copy of Rules & Regulations of the Society (ii) A copy of Power of Attorney, in favour of the individual to sign the tender documents and create liability against the Society/Trust. (F)Other documents as mentioned in terms of para 10 of Tender form(2nd sheet) of IRSGCC-April-2022 Part-I. (G)All other documents as per Clause 14 , 17 & 18 of IRSGCC-April 2022 -Part 1 are to be submitted.
In case the Tenderer is HUF, the following documents shall be submitted along with the tender: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii)An undertaking that the HUF is not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of opening of bids, either in individual capacity or as a member of the partnership firm or JV in which HUF was / is a partner/member. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the General Conditions of Contract. (iii)All other documents in terms of Para 10 of Tender form(2nd sheet) of IRS GCC April 2022. (iv) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case tenderer is a LLP Firm registered under LLP Act-2008, the following documents shall be submitted: (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv). An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (vi) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
In case the Tenderer is a Registered Society & Registered Trust, the following documents shall be submitted: (i)A copy of the Certificate of Registration (ii)A copy of Memorandum of Association of Society / Trust Deed (iii)A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) Copy of rules and regulations of the society (v)All other documents in terms Para 10 of Tender form(2nd sheet) of IRSGCC- April-2022 Part-I. (v) All other documents as per Clause 14 of IRSGCC -April -2022- Part 1.
Any other document required for evaluation of his/ their bid as deemed fit by the tenderer.
Scanned copy of Statement of Bank details, PAN & GST (as per Pro forma - 5).
Request for Mobilization Advance if applicable (as per Proforma- 8).
Proforma-9 for self-Certificate in regard to meeting the Minimum Local Content requirements as per Make in India Policy for Procurement Order Value less than of Rs.10 Crores. (as per Special Conditions of Contract) OR Proforma-10 of Certificate on percentage of Local Content as per Make in India Policy for Procurement Order Value more than Rs.10 Crores. (as per Special Conditions of Contract)
Uploading of Scanned copy/copies of formal agreement duly executed and notarised by the main tenderer/contractor with the subcontractor for the component(s) of work in a composite work proposed to be executed through subcontractor(s).
The tenderer whether sole proprietor/Company or a partnership firm/JV venture (JV) / Registered Society / Registered Trust/HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific persion whether he/they be partner(s) of the firm or any other person agreement, receive money, co-ordinate measurement through contractors authorized engineer, witnessed measurement, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign " No Claim Certificate" and refer all or any disputes to arbitiration the above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/memorandum of understanding/Article of Association or such other document, failing which, tender is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are advised to read the instructions contained in the User Manual for Contractors for IREPS (Works Module) available in the learning centre in website www.ireps.gov.in before preparation of Bid Online.
(a) To submit bid on line, the Tenderer shall navigate different tabs such as Eligibility Conditions, Compliance Conditions, General Instructions, Special Conditions, Technical/ Commercial Compliance Conditions, Undertakings, Checklists and other miscellaneous conditions included by the Railway in the tender document. It is also indicated against each condition whether the bidder is required to confirm whether he complies or not with the requirements of the condition (by clicking on the yes/no buttons), whether the bidder is allowed to enter his comments/remarks against the clause, and whether documents uploading against the condition is Allowed (Mandatory), Allowed (Optional) or Not Allowed. The tenderers are advised to read all the instructions/conditions contained in such documents carefully, before submitting their bid online.
E-Tender Forms shall be issued free of cost to all tenderers. Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website.
BID security of those tenderers will be forfeited who resile from their offers within the validity period of the tender.
Joint Venture is applicable for tenders valuing more than Rs.10.00 Cr. only.
Tenderers are advised to submit scanned copies of all documents including notarized documents. The responsibility of submitting the correct documents lies with the tenderer. Tenderers may ensure that all scanned and uploaded documents are readable and that there are no errors/ omissions/discrepancies / over- writings anywhere in such documents before submitting online. Railway will not be responsible for any incomplete/erroneous documents uploaded.
The tenderer shall not add any condition(s) on their own anywhere in their offer including documents uploaded with the offer. Any such conditions if stated and if are in violation of the Railways Tender conditions, may lead to summarily rejection of the offer. Railway reserves the right to reject such offers summarily without assigning any reasons whatsoever.
No post tender correspondence will be permitted and the tender shall be decided based on the documents submitted / attached with the offer only. However, Railway reserves the right to verify / seek for any clarification on the documents/credentials already submitted by the tenderer along with the offer.
Railway reserves the right to verify/seek clarification from authority/professional who has issued Certificate towards Technical/Financial eligibility of the tenderer.
Railway reserves the right to cancel the tender without assigning any reason thereof.
Railways reserve the right to reject any or all offers without assigning any reason thereof.
If the Tenderer(s) deliberately give(s) wrong information in tender or create(s) circumstance for the acceptance of tender, Railway shall without prejudice to any other right or remedy, shall reject such offer at any stage and forfeit the amount deposited as Earnest Money besides suspending the business for a minimum period of five year.
Even for the working contractors of this Railway, the onus of establishing the credentials of the tenderers from the office records or otherwise does not lie with the Railway. Railway shall evaluate the offer only from the certificates/documents which are submitted / attached with the offer.
The Tenderer(s) shall keep the offer open for a minimum period of 60 days in the case of Single Packet system of tendering and 90 days in the case of Two Packet system of tendering from the date of closing of the tender.
If eligible L-1 tenderer resiles/withdraws offer after closing of the tender such tenderer shall be debarred from participation in the tender for this work and Bid Security shall be forfeited.
The General Conditions of Contract governing the performance of the works covered by this tender are the Indian Railway Standard General Conditions of Contract [IRSGCC]- April-2022 as amended from time to time up to date. A soft copy of the Indian Railway Standard General conditions of Contract is given as attached documents to the tender for reference. The tenderer(s) is/are deemed to have fully read, understood and agreed all the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date while submission of offer and any claim that the tenderer (s) is/are not aware of same shall not be entertained.
The decision of the Railway regarding the corrections/suitability of the certificates is final and binding on the tenderer. The tenderer shall not have any claim whatsoever in this regard.
Unreleased Bid Security, if any, held with the Railway Administration shall not be adjusted towards the Bid Security to be remitted online for the present tender.
The tenderers are advised to visit the site of work in their own interest and acquaint themselves with the site conditions and expected quantum of work. The rate should be quoted duly considering the site conditions. The tenderer shall not have any claim later whatsoever in this regard.
Refund of Bid Security - (a) In Single Packet System, the Bid Security of the unsuccessful tenderers will be returned on finalisation / award of tender. (b) In case of Two Packet System, the Bid Security of the tenderers who do not get shortlisted on evaluation of technical bid will be returned by Railways. The price bids of shortlisted tenderers will be further evaluated for consideration and award of work and thereafter Bid Security of unsuccessful tenderers will be returned.
Corrigendum Notice: For the purpose of Corrigendum in the tender, the Notice Inviting Tender (NIT) period is split as under: (a) Advertisement period: Time during which all information pertaining to tender shall be available but offers cannot be submitted. (b)Offer submission period: Fifteen days prior to opening of tender during which tenderers can submit their offers. Issue of corrigendum will be done only during Advertisement period. No corrigendum will be issued during offer submission period. However, the tenderers may note that for cases requiring corrigendum during offer submission period, the tender under the said Tender Notice may be cancelled at the discretion of Railways and shall be re-tendered. (c) Date of inviting tender shall be the date of publishing tender notice on IREPS website if tender is published on website or the date of publication in newspaper in case tender is not published on website
Mobilisation Advance is applicable for advertised Tender value of more than Rs.50.00 Crore. Tenderers may read the terms and conditions for grant of such Mobilisation Advance given in the Tender Document. The rate of interest will be as notified by Railway Board in advance of each financial year and will be applicable for tenders opened in that financial year. Tenderers may submit their request for grant of Mobilisation Advance in Pro forma 8 attached with Tender Document.
An Proprietor / Partnership Firm / Company /JV Firm/ HUF /LLP Firm / Registered Society etc., & Registered Trust can submit only one offer either in his/their individual capacity or as a Proprietor or as a partner of Partnership firm / JV Firm / HUF / Society etc., or as a Director of/LLP Firm any Company etc. In case of more than one offer received and any person is also a Proprietor/Partner of Partnership Firm/JV or Director of a Company/Subsidiary Company which also participated in the same tender, then all such offers shall be considered as "Invalid".
The tenderer shall quote his rate as a percentage above or below or at par with the Schedule of Rates except where he is required to quote item rates and must tender for all the items in the Schedule of Quantities as appearing in the Financial Offer Page. The tenderer can also offer rebate (in percentage) on the Gross Bid value in the rebate field provided on the Financial Offer Page. The Net Bid value shall be calculated by applying rebate on the Gross Bid value. The offers shall be ranked on the basis of the Net Bid value.
Instructions regarding applicability of Price Variation Clause (PVC) is contained in the Tender Documents. Tenderers are advised to read such conditions before preparing their bid.
The offer shall be submitted by the tenderer or the person authorised by the tenderer to digitally sign the tender documents / contract documents on behalf of the tenderer.
The detailed item description of NON-USSOR items is given in the document attached with the tender. Tenderers are advised to read carefully before preparing their bid.
The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfil the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials, submitted by the tenderer, shall be self-attested/digitally signed by the tenderer or authorised representative of the tendering firm. Self-attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as documents supporting the claim of qualifying the laid down eligibility criteria, will be considered for evaluating his/their tender.
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway thereunder.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Bid Security, Performance Guarantee (PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
The Railway will not be bound by any change in the composition of the Partnership firm made subsequent to the submission of tender. Railway may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor
If the JV is dissolved on account of death, retirement of any member or for any reason what so ever, before fully completing the whole work or any part of it, undertaken by the contract agreement, the surviving member shall remain jointly, severally and personally liable to complete the whole work to the satisfaction of the Railway and to pay compensation for loss sustained if any by the Railway due to such dissolution. The amount of compensation shall be decided by the Railway and this shall be final and binding on the contractor.
Any bidder from a country which shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. Please refer Clause - 27 of SCC 2022 for further details.
The successful bidder shall not be allowed to sub-contract works to any contractor from a country which shares a land border with India unless such contractor is registered with the Competent Authority.
The work experience certificate shall be issued by an officer not below the rank of JA grade or bill passing Officer in Railways and Bill passing Officer/Executive In-Charge of work in other Govt. /Govt. bodies /PSUs. The certificates should bear the signature and seal of the issuing officer, name of the department. Etc.,
In Case JV firms are allowed to participate, Technical and financial Eligibility of the JV firm shall be adjudged based on satisfactory fulfilment of the clause No 17.15.1 & 17.15.2 respectively of Part- I of IRSGCC- April-2022 with upto date correction slip.
In Case participation of partnership firm, Technical and financial Eligibility shall be adjusted based on satisfactory fulfilment of the clause No 10,14I & 18 of Part-I of IRSGCC- April-2022with upto date correction slip.
DRAWINGS FOR WORKS: The percentage rates for the schedule items and itemized rates for the non-scheduled items quoted by the tenderer as may be accepted by the railways will, hold good irrespective of any changes, modifications, alterations, additions , omissions in the locations of structures and detailed drawings, specifications and /or the manner of executing the work. It should be specifically noted that some of the detailed drawings may not have been finalized by the Railway and will, therefore, be supplied to the contractor as and when they are finalized on demand. No compensation whatsoever on this account shall be payable by the Railway Administration. No claim whatsoever will be entertained by the Railway on account of any delay or hold up of the works arising out of delay in approval of drawings, changes, modifications, alterations, additions, omission and the site layout plans or detailed drawings and design and /or late supply of such materials as are required to be arranged by the Railway or due to any other factor on Railway Accounts.
As per clause No. 5 part I of IRGCC 2022 the details of exemptions/ discount of Earnest Money payment is as follow:
i) Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of earnest money deposit.
ii) 100 % Govt owned PSUs shall be exempt from payment of earnest money deposit
iii) Labour Cooperative Societies shall deposit only 50 % of earnest deposit as mentioned in the tender.
The tenderer whether sole proprietor/company or a partnership firm/ JV venture (JV) / Registered Society / Registered Trust / HUF etc., if they want to act through agent or individual(s), should submit along with tender, a copy of Power of attorney duly stamped and authenticated by a notary public or by magistrate in favour of specific person whether he/they be partner(s) of the firm or any other person specifically authorizing him/them to submit the tender, sign the agreement, receive money, co- ordinate measurement through contractors authorized engineer, witness measurements, sign measurements books, compromise, settle, relinquish any claim(s) preferred by the firm and sign "No claim certificate" and refer all or any disputes to arbitration. The above power of attorney shall be submitted even if such specific person is authorized for above purpose through partnership deed/ memorandum of understanding / Article of Association or such other documents, failing which, tender liable to be rejected.
Hosapete - Harihar Section: - Construction of ROB in lieu of LC No.37 @ km.43/275 between Stations Hagaribommanhalli and Vyasa colony + Proposed Construction of RUB as RCC Box (Pre Cast Segmental) of Size 1x7.5 X 5.15m (Clear Height 5.0m) in lieu of LC No.38 at 43/795 between Vyasa Colony and Kottur Station of Hubli Division. (Composite Work)
SWR-RSP-LC-37-38-ROB-07
SWR-RSP-LC-37-38-ROB-07
Open
Works - General
24 Months
Dharwad, Karnataka
₹0
₹23.1 L
23 Apr 2026
27 Mar 2026
9 Apr 2026
348 items across 12 schedules · ₹40,34,78,348.72 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| REINFORCEMENT CEMENT CONCRETE | — | — | — | — | |
| PRE-CAST RCC | — | — | — | — | |
| 1 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 50 | 10,585.9 | 5,29,295 |
| STONE WORK | — | — | — | — | |
| RANDOM RUBBLE MASONRY | — | — | — | — | |
| Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : | — | — | — | — | |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 200 | 7,311.25 | 14,62,250 |
| FLOORING | — | — | — | — | |
| TILE FLOORING | — | — | — | — | |
| Chequered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : | — | — | — | — | |
| 3 | Medium shade pigment using 50% white cement, 50% ordinary cement | Sqm | 500 | 1,483.6 | 7,41,800 |
| FINISHING | — | — | — | — | |
| POINTING ON STONE WORK | — | — | — | — | |
| Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : | — | — | — | — | |
| 4 | Flush/ Ruled pointing | Sqm | 400 | 385.4 | 1,54,160 |
| DISMANTLING AND DEMOLISHING | — | — | — | — | |
| General | — | — | — | — | |
| Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. | — | — | — | — | |
| 5 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 500 | 2,434.25 | 12,17,125 |
| 6 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 250 | 3,551.25 | 8,87,812.5 |
| 7 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. | Sqm | 25 | 1,147.2 | 28,680 |
| Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | — | — | — | — | |
| 8 | In cement mortar | cum | 25 | 2,060.2 | 51,505 |
| Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : | — | — | — | — | |
| 9 | In cement mortar | cum | 225 | 2,458.95 | 5,53,263.75 |
| 10 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 2000 | 5.65 | 11,300 |
| Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : | — | — | — | — | |
| 11 | Water bound macadam road | Sqm | 2051 | 217.45 | 4,45,989.95 |
| 12 | bituminous road | Sqm | 11051 | 428.5 | 47,35,353.5 |
| ROAD WORK | — | — | — | — | |
| ROADS | — | — | — | — | |
| 13 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. | Sqm | 4663 | 218.9 | 10,20,730.7 |
| 14 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). | cum | 2026 | 24.85 | 50,346.1 |
| SURFACE DRESSING | — | — | — | — | |
| 15 | Surface dressing on new surface in two coats with bitumen of grade VG - 10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. | Sqm | 10125 | 311.85 | 31,57,481.25 |
| PREMIX CARPET | — | — | — | — | |
| Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : | — | — | — | — | |
| 16 | On W.B.M. @ 0.75 Kg / sqm | Sqm | 2197.5 | 60.5 | 1,32,948.75 |
| 17 | On bituminous surface @ 0.50 Kg / sqm | Sqm | 12322.5 | 48.2 | 5,93,944.5 |
| 2 cm premix carpet surfacing with 1.8 cum and 0.90 cum of stone chippings of 13.2 mm size and 11.2 mm size respectively per 100sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). | — | — | — | — | |
| 18 | With Refinery Modified Bitumen CRMB 55 conforming to IRC: SP: 53 | Sqm | 10125 | 233.15 | 23,60,643.75 |
| Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification). | — | — | — | — | |
| 19 | 25 mm thick | Sqm | 2426 | 854.15 | 20,72,167.9 |
| SEAL COAT | — | — | — | — | |
| 20 | Providing and laying seal coat of premixed fine aggregate ( passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. | Sqm | 10125 | 88.55 | 8,96,568.75 |
| MISCELLANEOUS | — | — | — | — | |
| 21 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylonitrile ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | Each | 528 | 206.3 | 1,08,926.4 |
| Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. | — | — | — | — | |
| 22 | 50 to 100 mm average compacted thickness with bitumen of grade VG- 30 @ 3.50% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | cum | 924.35 | 8,505.65 | 78,62,197.58 |
| Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. | — | — | — | — | |
| 23 | 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. | cum | 847.25 | 12,126.2 | 1,02,73,922.95 |
| Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. | — | — | — | — | |
| 24 | Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm | Each | 10 | 7,183.35 | 71,833.5 |
| 25 | Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm | Each | 8 | 5,559.75 | 44,478 |
| 26 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | Sqm | 109.9 | 747.8 | 82,183.22 |
| 27 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 810.6 | 972 | 7,87,903.2 |
| 28 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- charge). | cum | 77 | 10,117.6 | 7,79,055.2 |
| Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | — | — | — | — | |
| 29 | With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 | cum | 2684 | 2,924.85 | 78,50,297.4 |
| 30 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. | cum | 2971.5 | 2,914.3 | 86,59,842.45 |
| Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. | — | — | — | — | |
| 31 | 80 mm thick C.C. paver block of M- 30 grade with approved color design and pattern. | Sqm | 241 | 1,091.5 | 2,63,051.5 |
| Schedule total | ₹5,78,87,057.8 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ASC-FEB-BRS_1.pdf
ATTACHMENT
BS110RGUIDELINESFORFABRICATIONOFSTEELGIRDERPROCEDUREMarch16_2.pdf
ATTACHMENT
IndianRailwayStandardCodeofPracticesformetalarcweldingforstructural.pdf
ATTACHMENT
IndianRailwayStandardspecificationforfabricationanderectionofsteelgirderbridges.pdf
ATTACHMENT
IRGCCuptoAC8.pdf
ATTACHMENT
IRGCC-ACS-9.pdf
ATTACHMENT
IRGCCACS-10.pdf
ATTACHMENT
SCCforLC3738.pdf
ATTACHMENT
Steel2024.pdf
ATTACHMENT
TSforcementworks.pdf
ATTACHMENT
TSTRANSPPORATIONOFPWAYMATERIALS.pdf
ATTACHMENT
Inspectionclause-ST.pdf
ATTACHMENT
TechnicalsupplementTELE.pdf
ATTACHMENT
TechnicalGuidelinesforSTContractualWorks_.pdf
ATTACHMENT
TechnicalSpecificationSIGNAL.pdf
ATTACHMENT
TECHNICALSPECIFICATIONELECTICAL.pdf
ATTACHMENT
SPECIALCONDITIONSOFCONTRACTElectrical.pdf
ATTACHMENT
TSforTrackWorks2022_repaired.pdf
ATTACHMENT
programmechart.pdf
ATTACHMENT
Proforma-2024.pdf
ATTACHMENT
weblinkadressfortechnicalspecificationforUSSORDSR2023items.pdf
ATTACHMENT
splattentiontobidders.pdf
ATTACHMENT
GCCACS11.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .