PROVISION OF COVERED SHED FOR FOL DUMP AND PROVISION OF COVERED SHED AT BUILDING NO. P-234 AT KALIMPONG UNDER GE 867 EWS

Amount

Excavation in post holes (for similar holes) each not exceeding 0.50 Cum, getting out, in soft/loose soiland removing surplus soil to a distance not exceeding 50m complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:3:6 mix type C2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

S&F mild steel work in trusses, posts, purlins, rafters etc., including special shaped washer etc. complete using round or square or rectangular hollow sections of grade st 240 complete all as specified and directed by Engineer-in-Charge.

S&F Fe 410-W (Gde-E- 250) quality-A rolled mild steel plates (plain or chequered), as in base plates etc., square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed by Engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet (trepezium or tile pattern etc.) 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engineer-in-Charge. Make for Item No. 5&6: TATA BLUESLOPPE/ LLYODS /JMBS/EVEREST INDUSTRIES LTD/CRIL or equivalent as approved by GE.

M&L for preparation of new or previously un treated surfaces of steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. Make: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/NEROLAC

S&F Fe 410-W (Gde-E- 250) quality-A Rolled steel sections, joist, channel, angle, flat or Tee sections fixed independently with angle cleats or other connecting plates etc., including dismantling exing steel work complete all as specified and directed by Engineer-in-charge.

S&F PVC false ceiling, coloured choice of wooden pattern consisting of 600 x 600 mm, 5mm thick PVC sheet used as panel insert in a frame work made of anodised aluminium T section of size 25x25mm, 19 gauge or 1mm thick in square pattern of grid 600 x 600mmwith suppoted on side walls with aluminium angle of size 25x25 mm, 19 gauge or 1mm thick and hanged from the ceiling with the help of J hook and GI wire/MS rod of 6mm dia of reqired length to maitain proper level complete all as specified and as directed by Engineer-in-charge. Make: - RAJSHRI PLASTIWOOD/ NANDI/ UNIVERSAL/ACCURA/SAINT GOBAIN/GYPSTONE/EVEREST

M&L for 10mm thick vetrified ceramic tiles of dark shade (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick vetrified ceramic tiles of dark shade (square/rectangular) polished area of each tile not exceeding 0.36 sqm, in skirting etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-charge. Make for Item No 10&11: NITCO/ SOMANY/ ASIAN / JOHNSON/ORIENT

S&F powder coated coloured aluminium frame for partitions, doors, windows, ventilators with one or more rebates, grills including joining cleat for fixing etc., complete all as specified and dierected by Engr-in-Charge.

S&F powder coated coloured aluminium window and ventilator glazed shutters sliding type with glazing bars, with standard aluminium sections for shutter top & sides , shutter bottom, shutter interlock of sizes 95 x 45 mm and 1.2 mm thick (min) and 4mm thick tinted and frosted sheet glass as panel inserts, including necessary handles, jointing cleats, glazing clips, rubber packing, rollers, locking plates, screws, etc. as per manufacturer's instructions complete all as specified and directed. Make for Item No. 12&13: JINDAL/INDALCO/HINDALCO

SANJAY MITTAL

Sri Gupta Construction

SANJAY KAUSHIK

DEEP CHANDRA JOSHI

MS MAYA PRAKASH GOEL AND SONS

GARGO TRADERS

M/S G. K. SUTHAR