PROVN OF PAVED AREA BEHIND BLDG NO 027 COVER SHED IN CHILDREN ACTIVITY AREA PROVN OF TOILET VISIOTRS PARENTS AT BLDG NO O18 AT NAVY CHILDREN SCHOOL AND ADDN ALTN FOR ROOF SHEETS AND CONNECTED WORKS IN P29 AND PROVN OF CHAIN LINK FENCING AND GATE AT S

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc and n.exc 10 Sqm on plan and not exc1.5 metre in depth for pits, independent holes etc, including getting out in any type of soil, complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and directed.

M & L reinforced cement concrete 1:1.5:3 in foundation, footing, etc complete. including raft footing foundation beams, plinth beams, bases for columns etc and mass concrete,etc complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separetly).

M&L for use and waste of formwork to sides of concrete foundations, footings and plinth beams and similar work vertical or batter, surface for rough finished etc, complete all as specified and directed.

M & L reinforced cement concrete 1:1.5:3 in column /pillars supported on top of footing, complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separetly).

M&L for use and waste of formwork to sides of columns/ walls for square, rectangular for fair finished surfaces etc, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 in slabs (using 20mm graded stone aggregate) supported on walls, beams and columns, floors, roofs, landings,shelves etc, complete all as specified and directed. (Note - Reinforcement and form work will be measured and paid separetly).

M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick horizontal rough finished surface complete all as specified and directed

M&L for reinforced cement concrete 1:1.5:3 (using 20mm graded stone aggregates) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. (Note- Reinforcement and form work shall be measured & paid separately).

M&L formwork to sides and soffits of floor or roof beams and lintels, cantilevers, overhangs etc for flat and fair finished surfaces.

M&L for TMT steel bars 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

M&L for TMT steel bars 8mm dia and over, upto and including 10mm dia as in strirups, spacers, binders cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and directed.

Returning, filling in with approved earth including spreading leveling, watering and well ramming in layers n exc 25 cm thick etc, complete all as specified and directed.

Removing excavated material/soil to a distance exceeding 500 metre and not exceeting 1000 metre and depositing where directed at a level not exc 1.5 metre above the starting point, complete all as specified and directed.

M&L Formwork to edges of concrete slabs, treads, breaks in floor, window cills,concrete railing and similar work exc 10cm but n.exc 20cm wide, for fair finished surfaces, complete all as specified and directed.

M &L Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish complete all as specified & directed by Engineer in charge

M & L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

Spreading, levelling approved earth/moorum in layers n.exc 25 cm thick, wall ramming including watering as required in floors etc, complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauze n.exc 63 mm, depositing, spreading and levelling in layers not exc 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone agreegate) as in sub base etc, complete all as specified and directed.

M&L for providing 30 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in levelling course, finished even and rough using extra cement including provision of neccesary form work, complete all as specified and directed.

M&L for rendering 20mm thick in cement mortar 1:4 in two coats (15+5mm) both coats mixed with water proofing compound @ 3% by weight of cement, surfaces of top layer finished even and smooth (without using extra cement) including necessary scaffolding etc complete all as specified and directed. (Note : WPC will be measured and paid separately as supply only).

M&L for rendering 15mm thick in cement mortar (1:6) on surfaces of walls including finishing the surfaces even and smooth without using extra cement and also including providing sagol finish etc, complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) to ceiling and finishing the surfaces even and smooth without using extra cement and also providing sagol finish etc, complete all as specified and directed.

M&L preparation of new plastered surface on ceiling and applying three coats of white wash.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall, chajjas, soffitis, beam, column etc and applying two coats of 100% anti fungal acrylic exterior emulsion paint over one coat of primer all as per manufacturer's instructions including necessary scaffoldings etc complete all as specified and directed.

M&L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane over roof etc, complete all as specified and directed.

M&L for providing 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 m and turnings) duly filled with fine sand and bitumen in the ratio of 3:1 ,complete all as specified and directed.

M&L granite (of any type) slab 18 to 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete for platform/ window cill/jambs over 20mm thick screed bed or bedding in cement mortar 1:4 etc complete all as directed .

Supply only 5mm thick glass figured glass, pinhead type for aluminium joinery etc, complete all as specified and directed.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wire cloth shall be measured and paid separately as supply only under respective items.

S&F aluminium anodised Grills of approved design for window / ventilators and fixing with aluminium anodised F/U channel, complete all as specified and directed. Note: The Grills shall be of Model DG-102/DG-104 of Make Deco or equivalent make as approved by the GE.

M & L Coloured glazed ceramic tiles 450 x 300 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,complete all as specified and shown in drg for SI No. 8095 on ser page No.160 in SSR-2010 (Pt-II).

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S.frame shall be covered with heat moulded plain colour PVC`C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification & drawing-for S.I No. 8080 on Sr page No. 156 in SSR-2010(Part II), complete all as specified and directed.

Supply and fix stainless steel butt hinges of size 100mm, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F cast iron Nahani trap with 75mm dia out let including provision of grating,connecting, jointing to waste pipe with lead joints, including embedding the same in PCC 1:2:4 type B-1 (using 20mm graded stone aggregates), complete all as specified and as directed .

M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement.complete all as specified and as directed .

S&F flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene of low or high density or PVC, 32mm dia, complete all as specified and directed.

S&F Wash basins, Vitreous China (oval shaped table top type) 550 X 400 mm size, including cutting for and pinning in ends of brackets or erecting stand and fixed in position complete

S&F PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed.

Supply & fix 15mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.

Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 15mm bore stop valves, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F 15mm bore bib taps, cast copper alloy,chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or brass ferrule etc, complete all as specified.

S&F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe, complete all as specified.

S&F pillar taps, cast copper alloy, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore, complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT (Minimum Weight 40 gram), complete all as specified and directed.

S&F vitreous China wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and directed by the Engineer-in-charge

M&L for 150mm NP 2 RCC pipe laid in trenches and jointed withsocket and spigot complete all as specified and directed, NOTE:- Excavation and earth work shall be measured and paid separately.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded agg) as in bed to drain pipe of 150mm bore including packing under and haunching against the sides of pipe after they are laid and tested including necessary shuttering and supports to concrete and laying beds to falls, complete all as specified and directed.

S&F CI soil, waste and vent pipes 100mm bore in any length with ears with and including lead joints laid in trenches or in floors or fixed to walls complete all as specified and directed. NOTE: Excavation and earth work shall be measured and paid for separately.

S&F cast iron cowls for 100mm bore CI pipe with cement joints,complete all as specified and directed.

M&L Pre-construction Antitermite treatment for treating the backfill in contact with foundation using chloropyriophos emulsion (1% concertration) conforming to IS-8944 at the rate of 7.5 litres of emulsion per square meter of vertical surface (area of the sub structure in contact with backfill to be measured), complete all as specified and directed.

M&L Pre-construction Antitermite treatment for treating the top surface of filled earth using chloropyriophos emulsion (1% concertration) conforming to IS-8944 at the rate of 5 litres of emulsion per square meter of surface,complete all as specified and directed.

M&L Pre-construction Antitermite treatment for treating the soil under plinth protection using chloropyriophos emulsion (1% concertration) conforming to IS-8944 at the rate of 5 litres of emulsion per square meter at surface area,complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed.

S & F Precast plain cement concrete prepolished coloured chequered floor tiles 300 x 300 x 8 to 10 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately) Note: Make Duracrete/ Vitco/super/Rustica/ Ringlets/ Radio/ Icon or equivalent of Eurocon/ Ultra tiles.

M & L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles all as specified.

M & L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of wall finished surface etc complete.

Dismantling of Cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M & L PCC type A2 Nominal mix M20 (1: 1 1/2 : 3 )using 20mm graded aggregate

Form work to edges of concrete flats and similar work and fair finished surfaces complete all as specified

Supplying & fixing Framed work such as grills, gratings,plane or chequered plates with angle frame etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165

M & L Preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint ( Ordinary tint) over one coat of red oxide primer.

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

M&L for Sand filling under floors or in foundation including watering and consolidation all complete.

M&L PCC Type C2 1:3:6 (40mm graded agg) in foundation, paving etc all as specified .

Excavating in post holes n. exc 0.5 Cum each , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around,in layers not exceeding 25cm watering ,and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil.

S&F steel work in tubular trusses /posts including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS -1161-1979 grade ST -240 all as spd and directed

S & F rolled mild steel sections such as channel, angle or tee section. MS plate etc confiming to Gde fe 410 as in post hip and jack rafter brackets, rafters, railing and purlins including necessary welding etc. complete all as specified and directed by Engineer-in-charge

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes. RMR 1040 profile width 1125mm Note : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed. Note: Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including any pattern roof coverings complete all as specified and as directed by the Engineer-in-charge.

All as per item No 80.00 above but plain sheets in ridges

S& F in repair Gypsum Board 12mm thick in ceiling fixed to framework with screws as in ceiling flat or sloping completed all as specified and directed Note:(i)The unit rate is not included for frame work only taking down the old gypsum board and S&F new gypsum board is catered.

S&F in repairs GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall along with centre/ intermediate channel 0.9 mm thick having equal flanges of 15 mm each and web of 45 mmsuspended from soffit/purlin at appx 900 mm c/c all necessary fittings complete and Hangers 6mm dia GI (upto 1200mm length) adjusted level fixed to purlines by means of GI wire

Dismantling mild steel work as in roof truss/purlins/gusset plates/cleats of any description and in any position.

S&F Rolled sections/tubular sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Demolition to brick work laid dry built in cement mortar complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster of any description from brick or stone walls including raking out joints, hacking for key , scrubbing down with water etc complete all as specified

M&L Preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over a coat of primer over one coat of wall care putty.

Complete removal of existing treatment and applying two coats of acrylic paint using necessary scaffoldings at any heightover a coat of weather proof primer.

M&L for complete removal of existing treatment on old decorated surfaces on walls, preparation for distempering and applying two coats of oilbound distemper over a coat of primer over a coat of wall care putty including stopping of nails holes,cracks etc. complete all as specified and directed.

M & L for cement concrete 1:2:4 , type B-1 (using 20mm graded stone aggregate) as in coping/roof kerbs including necessary form work.

M&L Preparation of new ceiling surfaces and applying two coat of oil bound distemper over a coat of primer including preparation of surfaces by filling of cracks with POP/putty including making the surface of gypsum board smooth with POP complete all as specified.

M&L for plain cement concrete 1:2:4 type C-2 (using 40mm graded aggregate) as bed blocks, foundation and complete all as specified and directed by Engineer-in-Charge

S&F for PVC coated galvanised chain link fencing of wire mesh size 50 mm x50mmx3mm weighing not less than 2.18 kg/sqm (weight inclusive of PVC coated) PVC coated line wire etc including fixing line wire to angle iron posts / rails straining bolts with provision of binding wire etc complete all as specified

S&F framed work as in door or gates of angles or other section with gueset plates, rails, braces grills . fittings etc. complete all drilled for fixing of steel sheeting or other covering doors etc.to be prepared for hanging for sliding with hooks and pintel hinges and fasteing commplete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1: 4 complete all as specified and directed.

MADHU ENTERPRIZES

sri ram construction

RAJU AND CO

Satyanarayan Trading Co.

M/s. MAYUR ENTERPRISES

jkconstruction