Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF NEW TOILET FOR GOVT HIGHER PRIMARY SCHOOL AT SHANTINAGARA IN CKM TOWN OF CHIKKAMAGALURU TALUK (GENERAL)

Rural Development and Panchayat Raj Department

RDPR Division Office Chickmagaluru | Karnataka

Amount: ₹5.2 LCloses: 2 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published26 Aug 2024
Closed2 Sept 2024
Retendered26 Aug 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 26 Aug 2024

Tender Value

₹5.2 L

EMD Value

₹13,000

Closing Date

2 Sept 2024, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SANTHOSH

Mobile Number

Work Description

CONSTRUCTION OF NEW TOILET FOR GOVT HIGHER PRIMARY SCHOOL AT SHANTINAGARA IN CKM TOWN OF CHIKKAMAGALURU TALUK (GENERAL)

Tender Information

Tender ID

RDPR/2024-25/BD/WORK_INDENT7357

Reference Number

RDPR/2024-25/BD/WORK_INDENT7357

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Chickmagaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredKPWD Registered Class-IV Certificate or Attach above contractor Registration Certificate

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years 2019-20 to 2023-24 achieved in at least One financial years a minimum financial turnover in all classes of civil engineering construction works only of Rs.4.36 lakhs. usually not less than One time the estimated annual payments under this contract. Approved by CA with UDIN Number and also Profit & Loss statements 26 AS

RequiredTo qualify for Award of this contract, each Tenderer should have in his name in the last five years, satisfactorily completed as prime contractor, Similar nature of work of value not less than Rs.2.18 lakhs. Attach Work done Certificate issued by competent authority of rank not less than Executive Engineer.

RequiredGST Declaration Certificate /sign the declaration certificate as uploaded in tender document

RequiredAttach Adhaar Card, Pan Card and GST Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

The tenderer should be a PWD registered Contractor

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should follow strictly prevailing rules of labour act.

Conditional tenders will not be accepted.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPP Portal.

All Scanned Documents of the Original should be up-loaded, Executive Engineer/ Superintending Engineer/ Chief Engineer reserves the right verify the Original Documents before approval, 0riginal documents / Certificates for qualification shall be produced when called for during evaluation of tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The Tenderer should maintain the Work during defective liability period as indicated in The Contract Data

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work.

If the tender of the successful tenderer is seriously unbalanced in relation to the Employers estimate of the cost of the work to be performed under the contract, the Employer may require the Tenderer to produce detailed price analysis for any or all items of the Bill of Quantities, to demonstrate the internal consistency of those prices with the construction methods and schedule proposed. After evaluation of the price analyses, the Employer may require that the amount of the performance security set forth in Clause 24 be increased at the expense of the successful Tenderer to a level sufficient to protect the Employer against financial loss in the event of default of the successful under the contract.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount separately. And Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2021-22 and prevailing GST (18% of Amount Put to tender) amount is kept in form of Lump sum in sanctioned estimate according to guidelines in Common SR (GO:PWD 51 RDF 2019 Bengaluru Dt:18.03.2022). Tender has been inviting through an Option with INCLUSIVE. But the item wise rates do not include GST. Hence, GST will be paid separately for the quoted amount accordingly.

The employer reserves the rights to reject one or all tenders without assigning any reason.

In case if the death of a contractor, after executing the agreement / commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

PERFORMANCE SECURITY - The successful tenderer shall furnish Performance Security Deposit (Achievement Guarantee) at 5% of the amount put to tender with in 20 days after approve of tender as per rule 29.5 of the tender and clause 44 of the agreement in the form of D.D duly pledged in the nature of EXECUTIVE ENGINEER, PRED, Chikmagaluru

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Item for which no rates or price has been entered in will not be paid for by the Employer when executed & shall be deemed covered by the other rates & prices in the bill of quantities.

The tender validity period is 90Days from the date of opening of Tender

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Bid document.

Name, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹13,000

Important Dates

Last Activity

26 Aug 2024

Published

26 Aug 2024

Download Ends

27 Aug 2024

BOQ Preview

•

CONSTRUCTION OF NEW TOILETB FOR GOVT HIGHER PRIMARY SCHOOL AT SHANTINAGARA IN CKM TOWN OF CKM TQ

•

Demolishing brick work manually/ by mechanical means including stackingof serviceable material and disposal of unserviceable material to theappropriate disposal area as per direction of Engineer-in-ch...

•

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)( P 9 I.N:5.2) Volume-2 CSR-23-24)

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)( P 9 I.N:5.4) Volume-2 CSR-23-24)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates an...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x150x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing M.S. grills of required pattern in frames of windows

•

etc. with M.S. flats, square or round bars etc. including priming coat with

•

approved steel primer all complete. Fixed to ste...

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

•

Providing 12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...

•

Providing & fixing factory made PVC Door frame of size 50x47mm witha wall thickness of 5mm, made out of extruded 5mm rigid PVCfoam sheet metered cut at corners & jointed 2 No.s of 150mmlong brackets o...

•

Providing & fixing 30mm thick factory made rigid foam Prelam PanelledDoor Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top & bottom rails, covered with heat moulded Prel...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, I...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing white vitreous china water closet squatting pan(Indian type) :(P 134 I.N14.13.2)Orissa pattern W.C. pan of size 580x440 mm(Volume-2 CSR-23-24)

•

White Vitreous China Wash basin size 630x450 mm with a single 15 mmC.P. brass pillar tap(P 128 I.N14.7.2)Volume CSR-23-24)

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.(P 128 I.N14.23)Volume CSR-21-22)

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with allfitting arrangements & all necessary accessories complete.( P 6 I.N:13.59) Volume-1 CSR-23-24)

•

Providing and fixing brass bib cock of approved quality :15 mm nominal bore.( P 115 I.N:13.2.1) Volume-2 PWD SR-21-22)

•

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore( P 115 I.N:13.5.2) Volume-2 PWD SR-23-24)

•

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete( P 127 I.N: 13.58) Volume-2 PWD SR-23-24)

•

Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting

•

arrangements & all necessary accessories complet( P 127 I.N: 13.60) Volume-2 PWD SR-23-24)

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Supplying & errection of RCC rings for well steining of 0.3 MtrDepth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size wellcompacted includin...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two coats on new work afterthoroughly brooming the surface to remove all dirt, dust, mortar dropsand foreig...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adh...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box (I.no.1.5.2)

•

Supplying and flush mounting powder coated / galvanizedmetal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting inBrick/Stone/C.C wall(I.no...

•

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc,200 x 90 ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cut...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One WaySwitch(I.no.3.6.1)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket(I.no.3.6.3)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module(I.no.3.6.4)

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch(I.no.3.6.4)

•

Supplying And fixing/replacing of 6/16/32A electrical

•

accessories on existing switch board.(I.no.3.14.6)6A Lamp Holder

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

GST DECLARATION CERTIFICATE PRED.docx

Tender Document • 0.01 MB

CORRIGENDUM_4_2024-25.pdf

Tender Document • 0.39 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

CONSTRUCTION OF NEW TOILET FOR GOVT HIGHER PRIMARY SCHOOL AT SHANTINAGARA IN CKM TOWN OF CHIKKAMAGALURU TALUK (GENERAL)

Rural Development and Panchayat Raj Department

RDPR Division Office Chickmagaluru | Karnataka

Amount: ₹5.2 LCloses: 2 Sept 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published26 Aug 2024
Closed2 Sept 2024
Retendered26 Aug 2024