RESTORATION OF SILT EJECTOR AT RD 11100 OF BDC

Amount

Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and Technical Specifications.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil by Mechanical Means depth 3m to 6m.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

Plain/Reinforced Cement Concrete M-25 in Open Foundation complete as per Drawing and Technical Specifications With Batching Plant, Transit Mixer and Concrete Pump

Cement concrete 1:4:8 mixing by mechanical means using concrete mixer volumetric type

Plain/Reinforced cement concrete in sub-structure RCC M25 complete as per drawing and Technical Specifications Height upto 5m

Furnishing and Placing Reinforced/ Prestressed cement concrete in superstructure as per drawing and Technical specification RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump For Solid slab super-structure including centering and shuttering Height up to 5m

Dismantling brick work tile, masonry or tile lining in cement

Brick masonry work in 1:3 insub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications

Supply of Skin plate

Cl Housing cover with worm Wheel Assembly, shaft. Handle G.M Bust with triple start threading inside for Spindle complete including labour charges.

Supply of Spindle for hoist mechanism threading including machining and complete in all respect to entire satisfaction of engineer in charge. M.S Spindle with double start or triple start threading 11‘ Height 1/3/4" dia. (i) up to 1.50 ton capacity.

Gate wheel assembly complete in all respects to entire satisfacation of engineer in charge

Providing grease nipple.

Supply of GI pipe hollow /pipe of any size.

Providing of hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & fixing of Galvanized nut & bolts of all size & length required.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide

Commissioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing and applying epoxy treatment including formulation of base by micro concrete, applying water sealing chemical, applying bonding chemicals etc.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Supply of multipurpose synthetic Hetiv Grease

Supply of multi grade mobile oil.

Drilling' boring bole including complete in all respects and to entire respects and satisfaction of engineer-in-charge 0-10 dia.

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres

Cement concrete 1:3:6 M10 With brick ballast 20mm gauge mixing by mechanical means using concrete mixer volumetric type

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.

12.5 mm thick cement plaster 1:4

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm)

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. 35mm thick

Teak wood wire gauge shutters without spring (Single Leaf)

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil, Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). 600x600mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi matt/Glosy/HighlyGlosfinish/Highlighter/ embosconforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry@ 3.3kg per sqm including pointing in whitecement mixed with pigment of matching shadecomplete.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro?hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths)

Wiring fan point (with fan box)

Wiring light point

Wiring 6 amp wall socket point

Wiring 16/20 amp power plug control point

Single Pole 16/20amp. Switch with indicator Flush Piano type

5pin 6amp. Wall Socket Flush Piano type

Step type Fan Regulator Flush Piano type (Socket size)

6/10amp. One Way Modular Switch (One Module)

Modular Cover Frame One or Two Module

Modular Cover Frame Six Module

Powder Coated Concealed Metal Box with Brass Lugs One/Two Module

Powder Coated Concealed Metal Box with Brass Lugs Six Module

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge

CPVC SDR 11 Pipe & fitting 25mm o/d

CPVC SDR 11 CPVC & fittings 20mm o/d

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good the same & finishing according to existing finish where required.

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making Size 150mm X 150mm good the same to its original condition.

C.P. brass Bib cock long nose/ long body foam flow without flange

Brass Bib cock/Stop cock 15mm x 400gm

Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (ii) Double Layer Tanks

Supplying and Fixing Sheet Pile including all charges like transportation charges for the sheet piles, transportation charges for the vibro hammer with excavator machine etc.

Any Other Item

THE GHAGGAR COOPERATIVE LABOUR AND CONSTRUCTION SOCIETY LIMITED