Estimate for Service Connection of Govt. Primary School at village Karanjikheda Under Budni D/c of (OandM) Dn. Budni

11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP)

140 Kg.,8.0 Mtrs. long PCC pole

PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR

Single Phase 5-30 Amp. LT Static Whole Current Energy Smart Meter as per IS-16444

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

11 KV(45KN) Composite Polymer Disc Insulators

11 KV Strain hardware (T&C type) fittings

11 KV D.O. Fuse Unit Polymer type

9 KV Gapless type ( 5KA) Polymer for DTR

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

M S Channel 100X50x6 mm

M S Channel 75X40x6 mm

Danger Boards Enamelled 11 KV

Bi-metallic clamps Distribution Transformers Bushing

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

M.S.Flat 50x6 mm

M.S.Angle 50x50x6 mm

Red oxide paint

Aluminium paint

MCB of 16 Amp

3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E

Switch Board

PVC Bush

Wooden Board 10"x8"

Rack Bolt/Screw

G.I. WIRES (16 SWG)

G.I. Wire 3.15 mm. (10 SWG)

Meter board 200x150x40mm Made up of Fiber glass Reinforced Polyster IS:13410 (1992)

LED Lamp with 9 Watt (Complete)

Concreting of structures & foundation (1:3:6).

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Stay Insulators 90X65mm

Complete jumpering of DTR

M.S.Nuts with Bolts

Meter cum protection box for 25 KVA DTR

G.I. STRIP 25X3 MM1

G.I.Pipe 40 mm Dia C grade type

Bentonite compound powder

Galvanized nut & bolt with washer

Stone Block/Pre cast block for base pedding(450X450X75MM)

DTR S/s fencing (31 feet) of 5' barbet fencing on PCC support of 7No, 6' Height

Double Gate (2No-2.5'x5x) set of MS angle (25x25x4mm) with mesh & locking

Additional Erection Charge

Labour Charges & all Fabrication Charges (STC Sub Division will provide the raw material like M.S. angle, M.S. Channel, M.S. flat, etc. to the contractor and the contractor will fabricate the items like V-cross arm, Top clamp, D.C. Channel, clamp, etc. as per site condition. Those fabrication charges are included in the Labour charges.) no extra amount will be paid.

Transportation Charges for All Equipments & Materials from area store to site & Site to Area store Bhopal

GST on Transportation @5%

GST on (Contractor side Material + Labour) @18%

Please Enable Macros to View BoQ information