DNIT for installation of deep T/Well for drinking water in Central Jail 2nd Hisar Drilling, installation development of One No Tubewell of 250 mm dia upto a depth of 65 meters B GL 1 No Tubewell Chamber 1 No Submersible Pumping set of ISI marked a

Amount

Drilling of bore 250mm dia bore by mechanical means in all kinds of soils including cost of all stablilzing material, transportation of rig and contingent equipment to the site of works including cost of casing pipe while boring and extracting the same against earth frictions etc. complete to the satisfaction of the Engineer-in-Charge. 1 to 168 mtrs. Depth.

Supplying & lowering of 250mm o/d PVC rigid housing pipe as per ISI marked 12½ kg. cm2 of standard length with required number of socket with inside thread to match the pipe threads in to borehole in vertical position includingncost of all scaffolding, derricks, Jim, poles, tools and plants, ropes, gays M.S. Clamp embedded in foundation etc. complete in all respects to the satisfaction of the Engineer-in-Charge of the work inclouding cost of all cutting, threading of pipe, where required and all sockets. 163 mtrs.

Providing and fixing of 10" i/d M.S. Rest piece completed in all respects

Providing and fixing of G.I. Nipple 4"x12" Long including 2 No. Flanges with Welding completed in all respects

Supplying and fixing following C.I. specials, with G.M. Flap including cost of jointing materials, excavation, laying, refilling the same including making adequte supports of masonry / concrete / steel for delivery pipe from submersible pump set upto 1.5 meter outside the outer wall of pump chamber as per plan shown as per specification given in Schedule No.II. (A) Detail of Pipe & specials. (a) C.I. D/F Bends,C.I. Tee, reducers, etc. upto 150 mm i/d. for installation of T/well & Raising Main

Deveopment of tubewell by Gen. Set Sub. Pumping Set as amended upto date and specification attached and as directed by the Engineer-in-Charge of the work including the cost of all consumeable stores, fuel, oil compressors, pumps and machinery etc. as required of this work.When developed by Gen. Set Sub. Pumping Set , 1 No. x 32 Hours= 32 Hours

Supplying and fixing of 100 mm M.S. clamp as per 15226/1975 as amended uptp date for supporting the housing pipe supported on two girders not less than 100 mm x150 mm and two meters long each embedded ub suitable foundation as approved by the engineer- in - Charge

Supply & erection of "Wall mounting type, solenoid driven, motor-less, electro-magnetic disphragm Dozing Metering pump working on single-phase 220/240 V 50 Hz electric supply with standard electronic controls, suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure" complete with necessary accessories. Make Fontus or any other standard make along with supply & erection of 1 No. voltage stablizer with each sozing pump alongwith 1 No. 300 ltrs. Capacity ISI marked HDPE storage tank, with each dozing pump of "Sintex or other reputed & approved make.

Supplying, erection testing and commissioning of submersible pumping set as per BIS specification No.8034-1989 (as amended upto date for pumps) and IS. 9283-1979 (as amended upto date for motor) the pump motor set should be capable of pumping clear fresh cold water having characteristics as specified in Clause-4 of IS 8034/1989 and clause 4.1 of IS 9283/1979. each Pump motor set shall be supplied with joint free 3 Mtr. double length PVC, insulated and PVC sheathed flexble 3 core flat type submersible copper cable of finolex make and junction box for jointing of submersible cable and submersible pumping set as per speciification given Make Texmo, Lubi, Kirlosk. 600 LPM 60 Mtrs. Head

Bidder Name

Amount

sonu sangwan contractor

SANDEEP KUMAR CONTRACTOR

Narottam Contractor

Pankaj

sonu sangwan contractor

Pankaj

SANDEEP KUMAR CONTRACTOR

Pankaj

Narottam Contractor

SANDEEP KUMAR CONTRACTOR