Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.8 LAccepted-AOC CONTRACTOR CAMP H NO A 40 02 WARD NO 18 VINDHYA COLONY DISTT UMARIA M P 484555 | NOWROZABAD | UMARIA | MADHYA PRADESH | 484555 | L-1 | Accepted-AOC M/S MANOJ SINGH IS L-1 BIDDER | |
| 2 | L-2₹1.6 L+₹5,857.92 (3.82%)Rejected-Finance A 49 10 VINDHIYA COLONY PINOURA NOWROZABAD DIST UMARIA M P | NOWROZABAD | UMARIA | MADHYA PRADESH | 484555 | L-2 | Rejected-Finance M/S MANOJ SINGH IS L1 BIDDER | |
| 3 | L-3₹1.6 L+₹9,540 (6.22%)Rejected-Finance QTR NO B 28 VINDHYA COLONY P O PINOURA NOWROZABAD DIST UMARIA M P | NOWROZABAD | UMARIA | MADHYA PRADESH | L-3 | Rejected-Finance M/S MANOJ SINGH IS L1 BIDDER |
Tender Value
₹1.7 L
EMD Value
₹2,200
Closing Date
7 Oct 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
STAFF OFFICER JOHILLA AREA
OFFICE OF THE STAFF OFFICER JOHILLA AREA PO NOWROZABAD DISTT UMARIA MP 484555
Shifting of qr no C 4 at 9 no colony at Umaria Sub Area of Johilla Area
2022_SECL_257404_1
SECL/JHL/S.O.(C)/ eNIT-40/22-23/460 dtd. 24.09.22
Open Tender
Civil Works - Buildings
Item Rate
15 days
JOHILLA AREA
3 documents required · 3 mandatory
₹2,200
28 Nov 2022
26 Sept 2022
8 Oct 2022
27 Sept 2022
7 Oct 2022
27 Sept 2022
27 Sept 2022 - 4 Oct 2022
Amount
By Mechanical Transport including loading,unloading and stackingLime, moorum, building rubbish Lead - 5 km
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete.
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) Neat cement punning.
Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
Brickwork with fly ash brick in cm1:6 in super structure
Brickwork with fly ash brick in cm1:6 in foundation and plinth
Refixing of CGI sheet(only sheet will be provided
labour rate for structural steel work
Total impact of GST for the purpose of CTC
ABADH KISHOR SHARMA
PRABHAKAR TIWARI
stage.html
html • 0.04 MB
techsummary_266162.pdf
PDF • 0.29 MB
finsummary_266162.pdf
PDF • 0.43 MB
LOA624.pdf
PDF • 1.67 MB
finance_266162.pdf
PDF • 0.25 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .