Construction work of interlocking tiles From Viru to Jyoti Jewellers from D-386 to Ganpati from Gogi to D-300 from D-200 to D-175 from D-288 to D-327 from D-248 to D-268 from D-251 to D-208 from D-247 to D-275 from D-239 to in Ward-75 Lajpat Nagar

Dismantling Of Tile Work Complete as per MORD Analysis of rate.

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 15000 m as per Technical Specification Clause 301.5

Brick masonry work in 1:4 cement mortar in foundation complete excluding pointing and plastering, as per drawing and Technical Specification Clauses 600, 1202 & 1203

Plastering with cement mortar(1:4),12 mm thick on brickwork in sub structure as per Technical Specification Clauses 613.4 & 1204

Providing and laying plain/reinforced cement concrete in open foundations complete as per drawing and technical specifications Clauses No. 800 & 1200 III

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Supply & laying of 80 mm thick ISI Marked I Shaped (gray base) machinacaly compressed Interlocking Cement concrete pavers blocks, smooth high laoss finish,skid resistant, manufactured from rubber moulds through vibrocompression mechanism, high pressure and control vibration machine having plan diamention 200x(160+120)mm with minimum 5mm thick toping. The compresive strength of Concrete paver blocks shall not be less than 30 MPa & weight 4.5 Kg per No confirming to IS:15658-2006 as per PWD SOR Bulandshahr Ch-2 SI No 5a .including cost of material and blanket layer of 3.00cm thick local sand labour, T&P etc. required for proper competion of work as direceted by Engineer-in-charge as per tech. Spc. 1500

Providing and laying in position machine battched and machine mixed design mix M- 20 grade cement concrete for RCC work using cement content as per approved design mix. Including pumping of concrete to site of laying but including the cost of centreing, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impaaining strenght and durability as per direction of Engineer - In - Charge .cement content considered in the item is 330Kg/cum as per MORD Analysis, clause 800,1205.4 & 1205.50.

Reinforcement & Structural Steel (Sail Rate) TMT steel Reinforcement /HYSD (Fe 550) s.no 13 (a) as per UPPWD sor 2025

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 500 mm internal diameter As DSR-2023 Item-19.19.2.2