ADDN / ALTN AND SPECIAL REPAIRS TO MD ACCN AT KALIMPONG UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Supply & Installation of pre-painted, high tensile 550 Mpa yield strength, Bare Galvalume Steel Sheet having maximum pitch of 250mm c/c & minimum 30mm crest depth in length as per site requirement. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal complete all as per manufacturers specifications and as directed.

Supply & Installation of 9re-painted, high tensile 550 Mpa yield strength, Bare Galvalume plain Steel Sheet. The galvalume sheet is to be manufactured out of 0.50mm (TCT) (Total Coated Thickness), with zinc-aluminium alloy of AZ-150. The GI based steel sheet shall have a hot dip metallic zinc-aluminium alloy coating of zinc (43.5%), aluminium (55%) & Silicon (1.5%). The profile is having return leg for proper side lap. The sheet shall be fixed using self Drilling/Self Tapping Screw with EPDM Seal complete all as per manufacturers specifications and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work), complete all as specified and directed.

Dismantling framed timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position, complete all as specified and directed.

S&F of false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or some equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmx600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction, complete all as specified and as directed.

S&F of joist, channel, angle, flat iron or tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A), complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and fair (without using extra lime or cement), complete all as specified and directed.

M&L for rendering 20mm thick (two layer, 10mm and 10mm thick) in cement mortar (1:4) with water proofing compound @ 2% by weight of cement in second layer or in the manner specified by the manufacturer and in the proportions indicated on fair faces of brick work or concrete surfaces, finished even and fair (without using extra lime or cement), complete all as specified and directed. Note: Water proofing compound will be measured and paid separately

Supply only integral water proofing compond, all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces in ceilings and finished even and smooth (without using extra lime or cement), complete all as specified and directed.

M&L for preparation of new plastered or unplastered surface of wall and applying two coats of distemper oil emulsion (OBD), over a coat of priming coat (alkali resistant priming paint, on plastered surfaces, preparatory to distempering) including 2mm thick wall care putty on wall, complete all as specified and directed.

M&L for complete removal of existing treatment on plastered or unplastered surface of wall including brooming down or steel wire brushing, scrapping down smoke scoot, mould, moss and efflorescent salt, trading oil and greasy spot and applying one coat 2mm thick of wall care putty and then applying two coats of distemper oil emulsion(OBD), white or tinted over a coat of priming coat (alkali resistant priming paint, on plastered surfaces, preparatory to distempering) after preparation of wall surfaces, complete all as specified and directed.

M&L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of cement paint on walls, complete all as specified and directed.

M&L preparation existing treatment (old surface) on walls and applying one coat of cement base paint on walls, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash on walls, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash on walls, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash in ceiling, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling, complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brickwork with fly ash bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar(1:4), complete all as specified and directed.

M&L for plain cement concrete (1:3:6), type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts, coping, filling in pressed steel chowkat or similar work including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not specifically provided for, complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix), (1:1½:3) type A1, (20mm graded crushed stone aggregate) as in Chajjas and the like, complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) (1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surfaces of concrete on flat surface, complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), fair finished surfaces of concrete on flat surface, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc., complete all as specified and as directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete over and including 20 mm thick screed bed or bedding layer in cement mortar (1:6), complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M/L for 10mm thick rendering in cement mortar 1:3 on other than fair faces of brick or concrete surfaces of internal walls in sunken slab finished even and fair with WPC.(WPC measured separately).

M&L for first layer of slurry of cement at the rate of 0.488Kg/Sqm mixed with acrylic based polymer modified cementitous composite compound at the rate of 0.253kg/Sqm this layer will be allowed to air cure for 4 hours,second layer of slurry of cement at the rate 0.242 kg/Sqm mixed with acrylic based polymer modified cementitous composite compound at the rate of 0.126 kg/Sqm.this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours including 200 micron thick polythene film pasted with the help of adhesives shall be provided over above treatment.NOTE:The rate includes preparation of surface,treatment and sealing of all joints,corners,junctions of pipes and masonary within polymer mixed slurry.This treatment shall be provided after provision of pipes and masonary within polymer mixed slurry.This treatment shall be provided after provision of cement plaster mixed with WPC and synthetic fibers while concrete is still green, complete all as specified and directed.

M&L for plain cement concrete (1:5:10), type E2 (using 40 mm graded stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) of 100mm / 110 mm bore including accessories set in cement mortar and removing rubbish from site, complete all as specified and directed.

S&F of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F of 75mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) bend any radius with access door, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend any radius with access door, complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door including jointing with solvent cement, complete all as specified and directed.

S&F of 110 x 75 mm bore PVC (SWR) reducer including jointing with solvent cement, complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement, complete all as specified and directed.

S&F in repair Brass chromium plated shower rose with or without swivel joints 125 mm size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

S&F of Brass CP Basin mixure, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore dia stop valves, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.

S&F of wall mixer 2 in 1 System-FLR with Provision for Overhead shower with 115 mm long bend pipe, complete all as specified and directed.

Taking up or down old 15 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on stone walls, complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC Brass Elbow tubes medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20mm outer diameter CPVC Brass Elbow (3/4 X ½) medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC Brass Tee medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC Male Brass Threaded Adaptor (MTA/ MBTA) medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC Female Brass Threaded Adaptor (MTA/ MBTA) medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 16mm outer diameter CPVC Union medium grade fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F of 15 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed.

Refixing old 15 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), complete all as specified and directed.

Taking up or down old 20 mm bore steel water tubing and connections, including cleaning for refixing or removal to store or from site, complete all as specified and directed.

S&F of 20 mm bore steel water tubes, medium grade, galvanised with and including all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor, complete all as specified and directed.

S&F of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F of Brass CP Sink mixure, swan neck swivel spout, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe and fixed, complete all as specified and directed.

S&F in repairs of 15mm bore dia bib taps, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs of kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and size of rack 800 x 250 x900 mm with shape and pattern as per sample kept in Sample room of GE Office, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

M&L in repair for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repairs of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repairs of soap dish, vitreous china white, approximate size 160mm x 160mm x 90mm, complete all as specified and directed.

S&F of PVC low level flushing cistern 10 litre capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS:2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type, complete all as specified and directed.

S&F in repairs of water closet (squatt pattern) of vitreous china squatting pan of pattern "ORRISA" pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe anti syphonic pipe etc complete including P or S trap set in and including necessary lean cement concrete, complete all as specified and directed.

S&F of vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish, complete all as specified and directed.

S&F in repairs of vitreous China Corner wash basin, white colour, size 405 x 405 x 205mm including cutting for and pinning in ends of brackets and waste pipe, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick, premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado / skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar (1:4), complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:6), complete all as specified and directed.

M&L for glazed ceramic colouered tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick as in vertical surface such as risers of steps, skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 10 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after resecuring or easing & adjusting, complete all as specified and directed.

Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame), complete all as specified and directed.

S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc., complete all as specified and directed.

S&F of pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock, strike plate, etc., complete all as specified and directed.

S&F of 35 mm thick (batten thickness) second class hard wood, plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F of 35 mm thick (batten thickness) second class hard wood, glazed and skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet. Stile and rails feathered at edges to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing and as directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed.

S&F of 100 mm size butt hinges, medium weight, cold rolled mild steel and fixed, all as specified and directed.

S&F of steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F of steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, complete all as specified and directed.

S&F of steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F of second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F of 18/19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work, complete all as specified and directed.

S&F of 12mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work, complete all as specified and directed.

M&L for second class hard wood plain fillets (sectional area exc13 sqcm & n exc 25 sqcm), square, rectangular or triangular in section, wrought, secured with screws, splayed, chamfered or rounded, complete all as specified and directed.

M&L for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18/19 mm thick particle board faces, complete all as specified and directed.

S&F in repairs of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps (when open), complete all as specified and directed.

S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed, all as specified and directed.

S&F of 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

S&F of 125 mm size aluminium handles, cast type, anodised, all as specified and directed.

S&F of 150 mm size aluminium handles, cast type, anodised, all as specified and directed.

S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F of 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw, complete all as specified and directed.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples fixed, complete all as specified and directed.

S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples fixed, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, all as specified and directed.

S&F of 3.0mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F of 4.0mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F of mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L for machine cut Kota stone slab flooring, 17-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 20 mm thick screed bed or bedding layer in cement mortar (1:6) finished even and rough, complete all as specified and directed.

M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick rendering in cement mortar (1:4) finished even and rough, complete all as specified and directed.

M&L for 75mm thick plain cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) as in plinth protection, path/steps, hardstanding finished the concrete surfaces even and rough to receive the topping layer or tiling with and including use and waste of form work, complete all as specified and directed.

M&L for plain cement concrete (1:2:4), type B-2 (using 20mm graded stone aggregate) as in surface channels and drains including necessary form work, complete all as specified and as directed.

S&F in repairs of 25mm dia curtain rod (curtain rails), alumunium alloy, powder coated with and including decorattive knobs etc., complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking down, chipping and removing the loose spailt , damaged cement concrete , cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement concrete , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re - bar surface , wash with clean water for removing all rusts from the old reinforcement bar surfaces , fixing new reinforcement, cut to lenghts , bend to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia for stregthen the members as required , applying two coats of epoxy zinc primer on new and old steel surfaces , saturate the substrate with water applying one coat of water , Nitbond SBR (Latex) and cement in ratio (1:1:3) slurry as bond coat after that applying ready mix epoxy repair mortar , 40 mm average thick in any number of coats , to provide at least 30mm thick cover to reinforcement , finished the surfaces even and fair includ ing erecting and dismantling scafolding for carrying out the work, complete all as specified and as directed . Note:- (i) New reinforcement will be measured and paid seperately (ii) Cost of fixing of new reinforcement by welding / binding with old reinforcement and providing , errecting and dismantling scaffolding shall deemed to be included in quoted ratres

M&L for expanded metal of weigtht not exc 4 kg per square metre, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.

M&L for point wiring with 1.5 Sq.mm (nominal area) PVC insulated sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed), medium grade with all necessary fittings, concealed wiring for light / fan / bell on independent board, point controlled by one switch including 1.5 Sq mm PVC FRLSH insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.60 mm thick pressed steel terminal boxes including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches, socket outlet, regulator etc. with 3 mm thick laminated bakelite sheet cover for housing switches, socket outlet, regulator etc., complete all as specified and directed including testing on completion. Notes:- (i) Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 1.5 Sq.mm for phase and neutral and one run of 1.5 Sq.mm for earth wire. (c) Concealed type in permanent bldg and surface type in temporary bldg or as directed)

M&L for point wiring with 1.5 Sq.mm (nominal area) PVC insulated sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed), medium grade with all necessary fittings, concealed wiring for one bell/ buzzer point controlled by one push button on the same board with other switches or independent including 1.5 Sq mm PVC FRLSH insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.60 mm thick pressed steel terminal boxes including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches, socket outlet, regulator etc. with 3 mm thick laminated bakelite sheet cover for housing switches, socket outlet, regulator etc., complete all as specified and directed including testing on completion. Notes: (a) Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 1.5 Sq.mm for phase and neutral and one run of 1.5 Sq.mm for earth wire. (c) Concealed type in permanent bldg and surface type in temporary bldg or as directed.

M&L for point wiring with 1.5 Sq.mm (nominal area) PVC insulated sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed), medium grade with all necessary fittings, concealed wiring for one 3 pin socket outlet 5 amps on the same board with other switches including 1.5 Sq mm PVC FRLSH insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.60 mm thick pressed steel terminal boxes including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches, socket outlet, regulator etc. with 3 mm thick laminated bakelite sheet cover for housing switches, socket outlet, regulator etc., complete all as specified and directed including testing on completion. Notes: (a) Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 1.5 Sq.mm for phase and neutral and one run of 1.5 Sq.mm for earth wire. (c) Concealed type in permanent bldg and surface type in temporary bldg or as directed.

M&L for point wiring with 1.5 Sq.mm (nominal area) PVC insulated sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed), medium grade with all necessary fittings, concealed wiring, for one 3 / 5 -pin socket outlet, 5 amps on independent board from DB, point controlled by one switch including 1.5 Sq mm PVC FRLSH insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.60 mm thick pressed steel terminal boxes including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches, socket outlet, regulator etc. with 3 mm thick laminated bakelite sheet cover for housing switches, socket outlet, regulator etc., complete all as specified and directed including testing on completion. Notes:- (i) Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 1.5 Sq.mm for phase and neutral and one run of 1.5 Sq.mm for earth wire. (c) Concealed type in permanent bldg and surface type in temporary bldg or as directed)

M&L for point wiring with 2.5 Sq.mm (nominal area) PVC insulated sheathed single core multi stranded copper conductor FRLSH cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia (concealed), medium grade with all necessary fittings, concealed wiring, for one 6 -pin socket outlet, 15 amps on independent board from DB, point controlled by one switch including 2.5 Sq mm PVC FRLSH insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.60 mm thick pressed steel terminal boxes including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches, socket outlet, regulator etc. with 3 mm thick laminated bakelite sheet cover for housing switches, socket outlet, regulator etc., complete all as specified and directed including testing on completion. Notes:- (i) Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases, black wire for neutral and green wire for earth. (b) Two run of 2.5 Sq.mm for phase and neutral and one run of 2.5 Sq.mm for earth wire. (c) Concealed type in permanent bldg and surface type in temporary bldg or as directed)

M&L for ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, three terminal, 240 Volts, all as specified and directed.

M&L for switch piano, flush type single pole, one way 5 Amp, 240 Volts, all as specified and directed.

M&L for switch piano, flush type single pole, one way 15 Amp with box and accessories, complete all as specified and directed.

M&L for bell push, flush type, 5/6 amp, 240 Volts, all as specified and directed.

M&L for Buzzer, Ding Dong AC. 230 volts, single pole, all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin, 5 Amps / 6 Amps flush type, 240 Volts, all as specified and directed.

M&L for switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal, all as specified and directed.

M&L for switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal, all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin, 15 Amp flush type, 240 Volts, all as specified and directed.

M&L for lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F of LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 9Watt, complete all as specified and directed.

S&F of LED light fitting 1x9W / 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, all as specified and directed.

Supply and fixing of LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete, all as specified and directed.

Supply and fixing of sheet metal enclousers for DB's with MCB incomer suitable for triple pole and neutral (TPN), double door, 4 Ways, built-in 200 Amps busbar for neutral link suitable for 415 Volts, AC, 50 Hz, complete all as specified and as directed.

Supply and fixing of 415V 10KA 'B' curve miniature circuit breaker (MCB) of triple pole and neutral(TPN) and current carrying capacity of 40 to 100 AMP in the DB complete with connection testing and commissioning, all as specified and directed.

Supply and fixing of sheet metal enclosure, double door for MCB DB's, 8 way single pole & neutral (SPN) and current carrying capacity of 200 amps rated bus bar suitable for 240 Volt, AC, 50Hz, complete all as specified and directed.

Supply and fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole & neutral (SPN) and current carrying capacity of 40 to 63 AMP in the MCB DB complete with connection testing and commissioning, all as specified and directed.

Supply and fixing of 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole (SP) and current carrying capacity of 5 To 32 AMP in the MCB DB complete with connection testing and commissioning, all as specified and directed.

S&F in repair of sub main wiring with two single core 6.0 Sqmm PVC (FRLSH) copper conductor, insulated multistranded unsheathed cable medium grade including PVC conduit concealed of required size (not less than 32mm) with accessories for sub main connection including 6.0 Sqmm PVC (FRLSH) insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified and directed. (Note:- Three runs of 6.0 sqmm PVC FRLSH copper conductor shall be measured as one unit length).

Taking down electric meter and keeping in safe custody of MES store for re-use, refixing the same with all accessories and necessary fixing arrangements, complete all as specified and directed.

Taking down existing exhaust fan and keep in safe custody to the MES store and refixing the serviceable exhaust fan to existing location including necessary electric connection grouting of MS fastener of suitable size, complete all as specified and directed.

Taking down water storage heater (Geyser) and keeping in safe custody of MES store for re-use, refixing the same with all accessories and necessary fixing arrangements, complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm × 60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron or steel earth lead wire 4.0mm dia size by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES SSR Part-I, connected to earthing test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil, GI pipe 20mm dia medium grade for watering and GI 15mm dia light grade pipe for protection of earth wire upto DB / test point from earth plate etc., PCC chamber with PCC cover in cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated, complete all as specified and as directed. Notes: Contractor should conduct necessary test such as earth continuity, earth resistance test in presence of Engineer-in-Charge.

Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables, heavy duty 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, under groung cables etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil, all as specified and directed.

Returning filling in soft / loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm, complete all as specified and directed.

Removal of surplus excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed.

M&L for sand cushioning to under ground cable in layers of 23cm thick (8 cm before laying the cable and 15 cm thick after laying the cable) in trenches, complete all as specified and directed. Note :-Puned layers of 18 cm thick sand shall measured only.

Supply and laying of old size sub-class ’B’ bricks (designation 75), laid flat equal to width of bricks, perpendicular to under groung cables over the dry sand cushioning, for cable protection, complete all as specified and directed.

M&L for 40mm dia steel tubes (light grade) galvanised with all fittings, laid in trenches/wall/pole/road crossing for protection of underground cable/ earth strip, all as specified and directed.

Cutting through existing bituminous road / PCC / floor, approx size width 50cm X 60cm depth along cross section of the road for laying of GI tubing / RCC pipe for encasing of cable and repairing the road to match with the original finish, complete all as specified and directed.

Note 1:- (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and general condition of contracts before entry / quoting the rates. Note 2:-The contract sum shall be arrived at after deducting amount of schedule of credit from the total quoted amount.

SANJAY SAW MILL (BID ID -3051586)

M/S JAYSHREE CONCERN (BID ID -3051322)

C. M. AGARWAL AND CO (BID ID -3050823)

MS MAYA PRAKASH GOEL AND SONS (BID ID -3051327)