Construction of Permanent Stage for UI.I.E.T. in P.U. South Campus Sector-25 Chandigarh.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil (Ref:-2.8.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) (Ref:-4.1.11)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reiforcement - all work to plinth level

1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size (Ref:-5.1.3)

Centering and shuttering including struuting propping etc. and removal of form for

Shelves (cast in situ) (Ref:-5.9.4)

Steel reinforcement for RCC work including straightening cutting bending ,placing and binding all complete upto plinth level

Thermo- Mechanically Treated bars (Ref:-5.22.6)

15mm cement plaster on rough side of single or half wall of mix

1:4 (1cement :4 fine sand) (Ref:-13.2.1)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work (Ref:-13.61.1)

Providing and laying 60mm thick factory made chamfered edge steel moulded interlock paver blocks(M-30) of approved make reflective matt finish of two equal colours i.e. grey and red laid over 100 mm thick cement concrete 1:8:16 with 20 mm thick cement mortar 1:4. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:-16.68)

Supplying and filling in plinth with Local sand under floors, including watering, ramming consolidating and dressing complete. (Ref:-N.S.)

Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in Foundation and plinth in :

Cement mortar 1:6(1 cement : 6 coarse sand) (Ref:-N.S.)

Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand) (Ref:-N.S.)

Providing and making of Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position In gratings, frames, guard bar, ladder, railings, brackets, gates, Trusses and similar works and applying a priming coat of approved steel primer and two coats of approved synthetic enamal paint. complete in all respect to the entire satisfaction of the Engineer-in-Charge. (Ref:-N.S.)

Kota stone slab flooring over 20 mm (average) thick base laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4( 1 cement :4 coarse sand): (Ref:-N.S.)

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x25mm of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (Ref:-N.S.)

Please Enable Macros to View BoQ information