JJM 2020-2021- Periyakulam Block - Package No. JJM / PKM-64

Amount

1. PROVIDING FHTC WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT ALAGAPURI IN VADAPUTHUPATTI PANCHAYAT

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm P V C Pipe 6 Ksc

90 mm P V C Tee

90mm P V C Elbow

90mm P V C Bend

90 mm P V C MTA

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Laying and jointing of 80mm G I Pipes

Cutting and Threading of 80mm GI Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 75 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

2. PROVIDING FHTC WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT AMMAPURAM IN VADAPUTHUPATTI PANCHAYAT

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm HDPE Pipe PN 8

90 mm HDPE Tee

90mm HDPE Bend

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Laying and jointing of 80mm G I Pipes

Cutting and Threading of 80mm GI Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 121 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

3. PROVIDING FHTC WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT CHINDALPURAM IN VADAPUTHUPATTI PANCHAYAT

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm P V C Pipe 6 Ksc

90 mm P V C Tee

90mm P V C Elbow

90mm P V C Bend

90 mm P V C MTA

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

90 mm P V C Pipe 6 Ksc

90 mm P V C Bend

90mm PVC Elbow

90 mm P V C Tee

90 mm P V C MTA

80 mm G M Gate valve

Solvent

80 mm G I Pipe

80 mm G I coupling

80 mm GI Bend

80 mm GI Elbow

80mm GI Tee

80 mm GI Union

80 mm flange set

80mm GI Hex Nipple

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90 mm & 63 mm P V C Pipes

Laying and jointing of 65mm & 50mm G I Pipes

Refilling the excavated soil in the trenches

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 51 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

4. PROVIDING FHTC WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT CHOCKATHEVANPATTI IN VADAPUTHUPATTI PANCHAYAT

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm HDPE Pipe PN 6

90 mm P V C Tee

90mm P V C Bend

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 141 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

5. PROVIDING FHTC WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT JJ COLONY IN VADAPUTHUPATTI PANCHAYAT

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm HDPE Pipe PN 6

90 mm HDPE Tee

90mm HDPE Bend

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 67 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

6. PROVIDING FHTC, DEEPENING OF OPEN WELL WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT MADURAPURI IN VADAPUTHUPATTI PANCHAYAT

Deepening of Open Well

Open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Hard granite mmeasured in solid including blasting & stacking - first 2m depth.

open well 25.00m - 26m depth

open well 26m - 27m depth (26.00m 28.00m)

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm P V C Pipe 6 Ksc

90 mm P V C Tee

90mm P V C Elbow

90mm P V C Bend

90 mm P V C MTA

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 113 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

7. PROVIDING FHTC, DEEPENING OF OPEN WELL WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT PINNATHEVANPATTI IN VADAPUTHUPATTI PANCHAYAT

Deepening of Open Well

Open well excavation complying with relevant clauses of T.N.D.S.S Well sinking & with lead upto 10m in Hard granite mmeasured in solid including blasting & stacking - first 2m depth.

open well 25.00m - 26m depth

open well 26m - 27m depth (26.00m 28.00m)

Pumping Main Lines

110mm HDPE Pipe PN 6

110mm HDPE Bend

110mm HDPE Tee

100 mm G I Pipe

100 mm G I bend

100 mm GI heavy type coupling

100 mm GM Non return valve

100 mm G M Gate valve

100 mm flange set

100 mm H Nipple

100mm GI Elbow

100mm GI Tee

100mm GI Union

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 110mm HDPE Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 133 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

8. PROVIDING FHTC, NEW BORE WELL WITH PUMPING MAIN LINES & DISTRIBUTION LINES AT SAKKARAIPATTI IN VADAPUTHUPATTI PANCHAYAT

Bore Well

Geophysical survey charges ( Minimum 3 Locations)

Drilling of 150 mm dia Bore well in hard rock area inculding labour charges for inserting the casing pipe etc complete.

Over burden soil

Hard rock areas

Supply and delivery of 180 mm dia pvc plain casing pipes 6 KSC

Supply and delivery of three phase 10 H P submersible pump set as per IS 8034 with out pannel board having duty condition of 50 LPM x 275 Headsubmersible pump set

Supply and delivery of Three phase pannel board with two level Guard and auto start suitable for 10 H P submersible pump set

4 Squr mm 3 core Cable

50 mm G I Pipe

50 mm G I bend

50 mm MS clamp set

50 mm GI heavy type coupling

50 mm GM Non return valve

50 mm G M Gate valve

50 mm flange set

50 mm H Nipple

Bore well steel cover plate

63 A fuse units

7/20 Serivice wire

7/20 G I Wire

4 ways P V C Reals

Meter board

Earth copper plate

Labour charges for the errection of 10 H P submersible puimp set in the bore well inculding fixing and jointing submersible cable with proper clamps upto the nstarter to required depth and all so fixing of riser pipes to the requied depth valve erection charges etc. comlpete.

Supply and delivery of MS kiosk of size (0.75m x 0.45 m x 0.75 m) made up of MS angle of size 50mm x50mm x4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS angle of size 25mmx3mm inculding cutting welding grinding locking aregement and labour charges etc. complete.

Pumping Main Lines

80 mm G I Pipe

80 mm G I bend

80 mm GI heavy type coupling

80 mm GM Non return valve

80 mm G M Gate valve

80 mm flange set

80 mm H Nipple

80mm GI Elbow

80mm GI Tee

80mm GI Union

90 mm P V C Pipe 6 Ksc

90 mm P V C Tee

90mm P V C Elbow

90mm P V C Bend

90 mm P V C MTA

Solvent

25mm Single Air Valve

Earthwork excavation and depositing on bank with n initial lead of 10 M initial list of 2 m. In hard stiff clay, stiff block cotton soil and hard red earth shales, murram, grvelstony earth and earth mixed with small bounders and hard gravely soil

Laying and jointing of 90mm P V C Pipes

Refilling the excavated soil in the trenches

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 69 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

9. PROVIDING FHTC WITH DISTRIBUTION LINES AT THADAMALAINAICKANPATTI IN VADAPUTHUPATTI PANCHAYAT

Distribution Lines

Provision for CC Road Cutting

65 mm G I Pipe

65 mm G I coupling

65 mm GI Bend

65 mm GI Elbow

65mm GI Tee

65 mm GI Union

65 mm flange set

65mm GI Hex Nipple

65mm GM Gate Valve

65mm x 50mm GI Reducer

50 mm G I Pipe

50 mm G I coupling

50mm GI Bend

50mm GI Elbow

50mm GI Tee

50mm GI Union

50 mm flange set

50mm GI Hex Nipple

50mm GM Gate Valve

Laying and jointing of 65mm & 50mm G I Pipes

Cutting & Threading of 65mm GI Pipes

Cutting & Threading of 50mm GI Pipes

Cement Concrete 1:4:8 using 40MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Cement Concrete 1:2:4 using 20MM. gauge hand brocken granite stone jelly for foundation including watering wherever necessary and laid in layers not more than 15 cm. thick, compacting etc. complete complying with standard specification and as directed.

Provision for Water Metre 50mm

Dirt Box

Erection Charges

Providing Functional House Hold Tap Connections for 11 Nos of House Holds

Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. 20mm (1/2”)

Supply, delivery and fixing of stainless steel flow control valve having stainless steel 202 Grade body and stainless steel ball in 304 Grade . The average flow rate of each model from 3 m to 12 m inlet pressure head to be tested and supplied with FCRI, Palakad and test certificate shall be furnished. The flow control valve shall have external threading and including packing, forwarding and transportation and as directed by the TWAD Board Officers.15mm size flow control valve with an average flow rate of 5-10 lpm.

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRCNSF LTD, UK. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. (As Per Table 7.0 of TWAD SR 2017-18 For HSC items)20mm (1/2”)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRCNSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes. 20mm (1/2”)

Supply and delivery of U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mmx1/2" suitable for 20mm OD MDPE pipes.

Earth work excavation Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandyand depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches for laying of pipes for water supply in the following type of soils as directed by Departmental officers (As per Revised data 2017-18)

Lowering, laying and jointing of MDPE pipes upto 40mm Dia etc., complete

Refilling the basement with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification

Labour Charges of House Hold Connection including All Charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

R SELVARAJ