Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹28.7 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹28.8 L+₹6,651.75 (0.23%)Rejected-Finance 146 D POCKET B MAYUR VIHAR PHASE II DELHI 110091 EAST DELHI 110091 | EAST | DELHI | 110091 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹30.4 L+₹1.6 L (5.62%)Rejected-Finance H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹30.8 L+₹2.1 L (7.19%)Rejected-Finance BASTI GOVINDPURA SIMBAL MORH MAKHANPUR GOJRAN JAMMU J K 181101 | JAMMU | JAMMU AND KASHMIR | 181101 | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹31.7 L+₹2.9 L (10.1%)Rejected-Finance | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
20 Jun 2024, 6:00 pmClosed
GE Jammu
GE Jammu c/o 56 APO Pin-900277
CLEANING AND REPAIR OF SEWAGE LINE, MANHOLES, SEPTIC TANKS AND SOAKAGE WELLS AND ALLIED WORKS IN ZONE B AT MIRAN SAHIB UNDER GE JAMMU
2024_MES_652360_1
GEJC-09/2024-25
Open Tender
Civil Works
Item Rate
330 days
AoR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
10 Jul 2024
24 May 2024
22 Jun 2024
24 May 2024
20 Jun 2024
7 Jun 2024
Amount
Cleaning and clearing the blockage of sewage lines of any dia, type and any depth removing any type of blockage by roding from main holes or by flushing water with pressure pump complete all as specified and as directed.
Taking out of solid / semi solid sludge from existing main holes of any size and any depth and burying the entire sludge / sludge water into excavated pit of adequate size including excavation and covering with earth or disposing off into covered vehicles outside the peripherry of defence land to a distance exceeding 1 Km including taking off RCC / iron main holes covers and refixing the same after clearing complete all as specified and as directed.
Cleaning of blockage of EWC / IWC / Urinal / Bathroom / Kitchen and gully trap and removing of sludge / spoil / waste to distance exceeding 100 metre and testing of water closet block for proper working after cleaning complete all as specified and as directed.
Notes: - For Ser Item No 1.00 to 3.00: - (i) For the purpose of payment, cleaning of sewage lines and upto including 1st manhole shall be measured as one job. (ii) The contractor will employ two safaiwalas alongwith necessary T&P on all working days for the period of contract for attending the sewage related complaints for buildings where machine cannot be reached. The complaints will be collected by the contractor or his accredited representative on all working days from B/R complaint cell. Complaints will be got signed by the authorised users representatives and will be returned to B/R complaint cell after completion of the complaint. No complaint shall be kept pending or unattended for more than 24 hours. Any damage to manhole covers, gully tarp covers, CI assess doors of CI pipes any dia, PVC pipes / fitting, 'P' traps, floor traps during the process of cleaning/clearing shall be made good by the contaractor by replacing same by new items without ant extra cost to the govt. Urgent nature complaints (EWC / IWC / Urinal / Bathroom / Kitchen and gully trap) shall be rectified within 24 hrs, if not Rs 150/- each complaint for each day will be penalised from the contractor.
Cleaning of septic tanks upto and including 25 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.
Cleaning of septic tanks exceeding 25 users upto and including 50 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.
Cleaning of septic tanks exceeding 50 users upto and including 100 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.
Cleaning of septic tanks exceeding 100 users upto and including 200 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.
Cleaning of septic tanks exceeding 200 users upto and including 250 users capacity inclusive of removing sludge and sludge water by vehicle mount sewage cleaning machine and jetting and the sluggly sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers etc complete all as specified and as directed.
Notes: - For Ser Item No 5.00 to 9.00: - (i) The sewage line is required to be cleaned by using water jetting machine as directed by Engineer-in-Charge. The unit rate quoted by the contractor shall deem to be included of this provision and no extra claim on this account shall be entertained by the department. Jetting machine will be compulsory minimum three times a week otherwise one day recovery of Rs. 10,000/- will be deducted from the payment due to the Contractor. (ii) Contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction / jetting machine. (iii) Manual cleaning operation / Scavenging is prohibited. (iv) The unit rate quoted by the contractor shall interalia deemed into the cost of providing skilled driver and operator and supervising engineer including provn of water for jetting and removal of sludge / silt / liquid / mud and sand (in foul position) etc complete all as specified. (v) Contractor shall engage the above mentioned T&P and intimate to Engr-in-Charge in writing with machine No / Vehicle No etc for their record and prior approval. (vi) The T&P as and when brought by the contractor based on site requirement, the concerned site executive shall take a photograph of machine along with the supervising staff i.e. JE's and contractor's representatives etc and same shall be kept in record with date. (vii) Pucca bound register shall be maintained showing the machine no / vehicle no and their deployment at site mentioning time and date duly signed by concerned JE, Engr-in-Charge and contractor and the same register shall be produced while claiming the payment by the contractor.
Excavation in trenches not exceeding 1.5m wide, not exceeding 1.5m in depth for foundation, etc, or for shafts, wells cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in any type of soil complete all as per specified and as directed.
Description all as per Ser item No. 11.00 here-in-before but depth exceeding 1.5m and not exceeding 3 metre complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.
Removal of surplus excavated soil to a distance exceeding 250 m and not exceeding 500m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Demolition / breaking of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as specified of 150mm / 200 mm dia pipe including demolition of cement concrete bed / haunching etc complete all as specified and directed.
Material and labour concrete bed to 150 mm bore pipe (1:4:8) in type D-2 (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and directed.
Material and labour for 150mm bore / inner dia double wall corrugated HDPE pipes (SN-4) with integral socket and necessary fittings, laid in trenches jointed as per manufacturer's instructions complete all as specified and as directed at site.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
Description all as per Ser item No. 19.00 here-in-before but except bricks complete all as specified and directed.
Material and labour cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping of manholes complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer's instructions (water proofing compound paid for separately) of brick work or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid separately under respective item.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Material and labour for providing precast cement concrete in cover slab (for manhole) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) set in cement mortar (1:4) complete all as specified and directed.
Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT bars complete all as specified and directed.
Description all as per Ser item No. 25.00 here-in-before but mild steel round bars 10mm dia and over as in manholes cover handles, steps, clamps etc. complete all as specified and directed.
Description all as per Ser item No. 25.00 here-in-before but mild TMT bars 6 to 8mm dia complete all as specified and directed.
Description all as per Ser item No. 25.00 here-in-before but mild TMT bars 5mm dia and over upto and including 10mm dia as in stirrup, spacers and binders complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required of 150mm/200mm dia pipe complete all as specified and directed.
Taking up or down PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100/75mm dia pipe complete all as specified and directed.
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75mm dia complete all as specified and directed.
Supply and fixing in repair stacks clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof of any bore pipe complete all as specified and directed.
Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and directed.
Supply and fixing PVC (SWR) bends / shoes any radius of 75 mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and directed.
Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for providing 75 mm thick plain cement concrete mix (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) as sub-base floor complete all as specified and as directed.
Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair complete all as specified and as directed.
Material and labour for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) laid in panels in hardstanding finshed even and smooth without using extra cement complete all as specified and as directed.
Material and labour for providing cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.
Material and labour for exterior grade full body vitrified tiles matt finished 400 x 400 x 12mm thick set jointed in neat cement slurry and pointed with grey cement and pigments to match the shade of tile pattern as approved in floors including 15mm thick screed in cement mortar (1:6) complete all as specified and as directed.
Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Supply only liquid waterproofing compound complete all as specified and directed.
Material and labour for preparation of newly plastered surface of any description and applying two coats of cement based paint over a coat of primer complete all as specified and directed.
Material and labour for preparation of old plastered surface of any description and applying one coat of cement based paint complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition) not otherwise specifically provided for complete all as specified and directed.
Material and labour for providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) in louvers and jallies, 25mm thick (measured solid), set in cement mortar (1:4) complete all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) in any section, including taking out embedded portion in concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed.
Dismantling fencing wire mesh in any type complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Excavation in post holes in soft / loose soil not exceeding 0.5 cum and getting out, returning, filling in and ramming earth or broken rubbles mixed with earth around in layers not exceeding 25 cm complete all as specified and directed.
Supply and fixing angle iron and flat iron as in fencing posts, struts, fillets etc including cutting to shape as required, drilling holes, notching for wires, splitting ends etc conforming to Fe-290 Grade 'E'-165 complete all as specified and directed.
Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end 12mm dia of neck exceeding 5 cm and not exceeding 10 cm long bolt with washer and nuts complete all as specified and directed.
Supply only 3mm dia galvanised iron wire chain link fencing and line wire 75x75mm mesh size and any type of stranded rails, straining bolts etc including provision of binding wire complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed.
Material and labour for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Supply and laying 150mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collars as in trenches complete all as specified and as directed.
AKSHAY CONSTRUCTION COMPANY
M/S A TO Z ENGINEERS
J P TECHNO
N S MANHAS
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
Bidder Name
N S MANHAS
ASHFAQ AHMED MANHAS
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
AKSHAY CONSTRUCTION COMPANY
M/S A TO Z ENGINEERS
J P TECHNO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .