Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.2 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹19.2 L+₹97,675 (5.35%)Rejected-AOC | 2 | Rejected-AOC L2 |
Tender Value
₹1.9 L
EMD Value
₹38,900
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Leh
GE (AF) Leh c/o 56 APO
PROVN OF CERTAIN MINOR WORKS AND REVENUE WORK AT AF STATION UNDER GE AF LEH
2022_MES_560581_2
GE(AF)/LEH/T-30/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Leh
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Leh
₹38,900
Yes
31 Mar 2023
8 Dec 2022
29 Dec 2022
8 Dec 2022
27 Dec 2022
8 Dec 2022
Amount
Plain cement concrete ,1:4:8, type D-2, using 40 mm graded mechanically crushed stone aggregates 75 mm thick as in sub base to floor and finishing the surface even and rough in and including demolition of existing concrete n exc 15 cm thickness and removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and as directed by Engineer-in- Charge.
Plain cement concrete ,type B- 0, 1:2:4 (12.5 mm graded mechanically crushed stone aggregates), 40 mm thick as in Flooring & finishing cement concrete surface even and smooth using extra cement type in and including demolition of existing concrete n exc 15 cm thickness and removing excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and as directed by Engineer-in- Charge.
Glass dividing strips, in Cement concrete in Floors etc., 3 mm thick, width or depth 38 mm , complete all as specified and as directed by Engineer-in- Charge.
Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required in stone walls built in cement mortar or in cement lime mortar exc. half brick but not exc. brick one brick, complete all as specified and as directed by Engineer-in- Charge.
Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a previously primed surfaces , complete all as specified and directed by Engineer-in-Charge .
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 (Section including Angle, hollow Square/ Rectanular tube, MS Flat, complete all as specified and as directed by Engineer-in- Charge.
Anodised aluminium frame for doors, windows,ventilators , partition wall with one or more rebates including joining cleat for fixing etc. in and including taking down of existing unservicable frame, complete all as specified and as directed by Engineer-in- Charge.
Anodised aluminium frame for doors, windows,ventilators , partition wall with one or more rebates including necessary joining cleats, glazing clips, ruber neoprene packing,anodised aluminum snap beading screws etc including joining cleat for fixing etc., complete all as specified and as directed by Engineer-in- Charge.
Aluminium Anodised door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw etc for fixing of Glass or baord ,complete all as specified and directed by Engineer -in-charge. Note: Glass or board shall be measured and paid seperately .
Sheet glass of thickness 4.8mm-5.00mm thick , ordinary quality in square exc 0.5 sq.m in each pane along with aluminium glazing beading incl rubber gasket on both side in and including hacking out old broken glass from metal frame ,complete all as specified and directed by Engr–in–Charge.
Window Roller Blinds & Curtains with fabrics and design of sample as approved by GE with and incl Top holding brackets, Roller chain pull /Lifting arrangement as per manufactures instruction in and including taking down old damaged blinds ,complete all as specified and directed by Engr–in–Charge. Note :- Sample of items are displayed in GE Office. Contractor has advised to visit GE Office for sample of items before quoting the rate.
Plain sheet glass 4.80 mm thick of ordinary quality and glazing in square exc 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in- Charge.
Pre-laminated particle board 9mm thick , interior grade, pre-laminated one side with decorative choice laminaton another side balancing white lamination fixed with screws to timber frame work , complete all as specified and as directed by Engineer-in- Charge.
Pre-laminated particle board 12mm thick , interior grade, pre-laminated one side with decorative choice laminaton another side balancing white lamination fixed with screws to timber frame work / fixed in metal frame with and including aluminium snap beading in and including taking down old unservicable board, complete all as specified and as directed by Engineer-in- Charge.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.47mm-0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in and including dismantling of plain or Corrugated steel sheeting any gauge, thickness including nainital pattern or similar pattern roof coverings, complete all as specified and as directed by Engineer-in- Charge.
Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.47mm-0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with self tapping screws in and including dismantling of plain or Corrugated steel sheeting any gauge, thickness incl nainital pattern or similar pattern roof coverings ,complete all as specified and as directed by Engineer-in- Charge.
HDF based laminated wooden flooring of planks of size 1.20m x 0.198m x 8 mm thick non glue laminated flooring including 0.6 mm PE poly moisture foam as in underlay barrier of overlapping 20 cm fix them with adhesive tape, boarding fix in floating manner based tongue and groove interlocking arrangement including taking down old and decayed wooden boarding of any description ,complete all as specified and as directed by Engineer-in- Charge. Note : Colour and design all as approved by GE
Suspended false celling system using Grid of size 595X595 powder coated GI frame work, main runner 32mmx24mmx0.28mm, cross tee 0.26mmx0.24mmx 0.28 mm and wall angle 22x22mm using with and including 6-7mm PVC laminated gypsum board ceiling. Grid system duly suspended by 4mm dia GI wired fixed with clips 1.20m centre to centre from the soffit of the roof in and including taking down old existing ceiling , complete all as specified and as directe by Engineer-in- Charge.
Point wiring for One Fan/ Exhaust fan point controlled by one 5 Amp one way switch by using 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC conduit (concealed) and conduit fittings/PVC casing and caping including pressed steel terminal switch box and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly and making good disturbed surfaces of walls, floors, etc. to match with the existing surfaces of walls, floors etc. ,complete all as specified and as directed by Engineer-in- Charge. Note : Wiring shall be done by using proper colour coding.
Switch piano flush type single ople 5 Amps, one way ,complete all as specified and as directed by Engineer-in- Charge.
Wall Fan of size, 400 mm sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters and connecting electrically by using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site including cutting hole for fixing to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, ,complete all as specified and as directed by Engineer-in- Charge. Make: Havells/Bajaj/Crompton/orient or any other equivalent makes as specified in Appendix of Makes. Note:Quoted rate of this item is deemed to be included the rates for cutting holes for fixing of Wall Fan including finising etc as per existing specification and nothing extra will be admissible on this account .
Exhaust Fan metallic body, 300mm(12") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters and connecting electrically by using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m, including forming jambs in CM 1:4 and making good to match existing wall finishes ,complete all as specified and as directed by Engineer-in- Charge. Make: Havells/Bajaj/Crompton/orient or any other equivalent makes as specified in Appendix of Makes. Note:Quoted rate of this item is deemed to be included the rates for cutting of opening for fixing of Exaust Fan including finising etc as per existing specification and nothing extra will be admissible on this account .
Exhaust Fan metallic body, 450mm(18") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters and connecting electrically by using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including plastering, necessary brickwork and distempering) to match with the existing specification, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m, including forming jambs in CM 1:4 and making good to match existing wall finishes ,complete all as specified and as directed by Engineer-in- Charge. Make: Havells/Bajaj/Crompton/orient or any other equivalent makes as specified in Appendix of Makes. Note:Quoted rate of this item is deemed to be included the rates for cutting of opening for fixing of Exaust Fan including finising etc as per existing specification and nothing extra will be admissible on this account .
Point wiring for one light/fan point controlled by one, one way Flame proof switch by using 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including steel conduit (concealed) and conduit fittings including pressed steel terminal switch box and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and 1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly and making good disturbed surfaces of walls, floors, etc. to match with the existing surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge. Note : Wiring shall be done by using proper colour coding.
Switch flame proof rotary type with termination box in LM6, 16 Amps, single pole 250 volts,complete all as specified and directed by Engineer-in- Charge. Make : Sudhir Switchgears/ Shyam Switchgears (P) Ltd. /Bajaj /Crompton/Havells/ or any other equivalent makes as specified in Appendix of Makes.
LED flameproof light fitting 1 x 20 Watts, CIMFR approved and recommended for gas/vapor group of IIA & IIB, Zone 1 & 2 and IP65 protection with die cast aluminium housing with heat resistant toughned glass with LED tube light fixtures, driver, holder, connector etc. complete with all accessories pre-wired and including connecting up with three core flexible copper conductor wire of suitable size,complete all as specified and as directed by Engineer-in- Charge. Make : Sudhir Switchgears/ Shyam Switchgears (P) Ltd. /Bajaj /Crompton/Havells/ or any other equivalent makes as specified in Appendix of Makes.
Flameproof exhaust fan of size 450mm sweep including lowers with IP-66 protection, complete with all accessories pre-wired and connecting up with twin core twisted flexible copper conductor wire of suitable size in and including cutting openings, through brick/stone walls built in cement mortar for fixin of FLP exhaust fans of 450mm sweep and other openings, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. to store and rubbish not exc. 50m, including forming jambs in CM 1:4 and making good to match existing wall finishes ,complete all as specified and as directed by Engineer-in- Charge. Make : Sudhir Switchgears/ Shyam Switchgears (P) Ltd. /Bajaj /Crompton/Havells/ or any other equivalent makes as specified in Appendix of Makes. Note:Quoted rate of this item is deemed to be incuded the rates for cutting of opening for fixing of Exaust Fan including finising etc as per existing specification and nothing extra will be admissible on this account .
Flame proof SPN DB 4 way 240 Volts having 200 Amp rated bus bars with and including 16 Amps 2 pole MCB-01 No and 6-32 Amps SP MCB's - 02 Nos ,complete all as specified and as directed by Engineer-in- Charge. Make : Sudhir Switchgears/ Shyam Switchgears (P) Ltd. /Bajaj /Crompton/Havells/ or any other equivalent makes as specified in Appendix of Makes.
Ceiling rose 3 terminal size 50x65mm surface type 230 volts ,complete all as specified and as directed by Engineer-in- Charge.
Maintenance free chemical earthing system complete with UL464 approved copper bonded earth rod 17mm dia 3 mtrs long electrode buried in ground to bore holes 150mm dia. Vertically to a depth not less than 0.50 mtr below normal ground level including Provision to connect the earth continuity conductor with copper bonded earth rod as per manufacture design or all as directed including 6 kg NABLLAB certified back fill chemical compound for filling bore hole with min 6 kg of Hygroscopic Gel. The ground enhancement chemical may be used in place of back fill compound as required and chemical may be used in place of back fill compound as required and manufacture recommendation to obtain below 1.0 ohms earth resistance value. A layer of 250-300mm soil (vegitable/cotton soil) is also required outside earth bore including necessary ingredients and water during process obtain desired value. The earthing strip of size copper 20x3 mm up to length of 7.5 mtr up to test point from copper rod is also included. test point terminal block should be made of Gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw compete. The scope include Iron frame of size 20 x 20 mm fixed with hinged with Pit cover of 300mmx300mm made of cast lorn as per company standard shall be as recommended by manufacture ,complete all as specified and directed by Engineer-in- Charge. Make;- JMV / Pargati electrocom / Enove/Marconite Note:- (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has made alternate earthing in case test result not found satisfactorywithout extra cost to the Govt quoted rates shall be deemed to included. (ii) Contractor shall submit one year guarantee for earth resistance below 1.0 Ohms and earth neutral voltage less than that 1.0 volts.
Copper Strip of 20 x 3.0 mm to interconnect the earth pit to Equipment Room etc including PVC saddles as per sample approved, complete all as specified and as directed by Engineer-in- Charge.
Porcelain saddle as per sample approved suitable for any type of Strip fixing screws etc for roof conductors and down conductors and walls above ground ,complete all as specified and as directed by Engineer-in- Charge.
Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw,complete all as specified and as directed by Engineer-in- Charge.
Note : Schedule of credit to be deducted on acceptances of bid.Details of Schedule of credit is given in tender documents
M/S LIBE & CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .