ADL/ALT AND IMPROVEMENT TO MEDICAL GAS PIPE LINE NETWORK AND OTHER CONNECTED ITEMS AT SURGICAL I TO III MEDICAL I TO IV AT ADM BLOCK FOR SETTING UP HDU BEDS OF COVID-19 ISOLATION WARDS UNDER PROVN OF PARA 35 AND 38 OF DWP 2020 AT BASE HOSPITAL DELHI

Amount

Supply, installation, testing and commissioning of 16X 16 Oxygen manifold system complete set with non-return valves, copper tail pipe connections and middle frame with chain with fully Automatic control panel complete all as specified and as directed. Make: Medrubb Industries/ Medline/MEC/ MPS/ Modular healthcare system/ M R Engg Pvt Ltd.

S & F 05 x05 Cylinder Oxygen emergency system with NRV, Copper tail pipe connection and middle frame with chain regulator complete all as specified and as directed. Make: Medrubb Industries/ Medline/MEC/ MPS/ Modular healthcare system/ M R Engg Pvt Ltd.

S & F Outlet point front insertion type (on line servicing) outlet point with non-return valve for easy maintenance outlet point for Oxygen service with stainless steel probe 304 grade complete all as specified and as directed.

S & F Metal body BPC flow meter. Make: Medrubb Industries/ Medline/MEC/ MPS/ Modular healthcare system / M R Engg Pvt Ltd.

S & F humidifier bottle (0- 15 liters) Adult. Make: Medrubb Industries/ Medline/MEC/ MPS/ Modular healthcare system/ M R Engg Pvt Ltd.

S & F Steel probes for gas Outlet Points. Make: Medrubb Industries/ Medline/MEC/ MPS/ Modular healthcare system/ M R Engg Pvt Ltd.

Supply, installation, testing & commissionig of copper pipes of following sizes which shall be drawn half hard temperature, solid drawn, seamless, phosphorous deoxidized, non-arsenic and degreased copper pipe conforming to EN 13348: 2001 and chemical composition as per BS-6017 of 1981 table 2 The supplies of copper pipe would be accompanied with manufacturers test certificate for the physical properties of copper pipes and their Chemical composition. The supply of pipes be further substantiated with inspection certificate from the third party like SGS/Lloyds Register. Make: Mexflo/ Metalco/ Rajco/ Modular healthcare system/ Easy flow

15mm x 0.9mm

28mm x 0.9mm

42mm x0.9mm

54 mm x 1.01 mm

76mm x 1.01 mm

Isolation ball valve with both sides end fittings for medical gas service of following pipe sizes- make: RN/ Medline/ Modular health care system

Supply, Installation, testing and commissioning of Microprocessor based Digital Line Services complete all as specified and as directed.

Supply, fabrication & fixing MS angle or tee section, etc cut to lengths for fabricating Oxygen manifold Barricade of size 12 feet x 4 feet x 8 feet (LxBxH), using Fe-410W grade 250 quality A, with 4 mm dia galvanised steel wire 150 X 100 m mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling with provision of gate having lock and key arrangement, including S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in roof covering for Gas Manifold enclosure, including M&L for hard core and PCC type B-2 , 1:2:4, 100 mm thick in Sub base of floor of size 10 feet x 4 feet (LxB) including applying two coats of synthetic enamel paint over and including one coat of red Oxide primer complete all as specified and as directed.

Supply only tool Adjustable Spanner of size 300mm ( 12 inch) , open end wrench for opening of Oxygen cyclinder tail pipe complete all as specified and as directed.Make Taparia

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 mtr deep in soft loose soil for laying / taking up/ taking down of cables and getting out and levelling of bottom suface to required level all as specified and directed by Engineer- in- Charge.

Returning filling in,. Including spreading, levelling,. Watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material (ie soil) from site to a distance n. exc 50 mtrs away and depositing where directed at a level n. exc. 1.5 mtr above the starting point all as specified and directed by Engineer-in-Charge.

Material and labour for river washed and screened, dry sand for filling in trenches below and around underground cables for cushioning of cables etc, complete all as specified.

S&F sub class B bricks having minimum compressive strength 75 Kg/ Sqcm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge.

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade 95 Sqmm 3 core

Supply and fix cable jointing kit for 11 KV grade cable for in door termination, heat shrink type, joint complete with jointing material and accessories suitable for3 core XLPE, armoured, Al conductor cable of size 95 sqmm Note :- The joniting material like long sleeve for RMU connection and other connected items will incluive in above rate )

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm Note :- The joniting material like long sleeve for RMU connection and other connected items will incluive in above rate )

Supply and fix cable jointing kit for 11 KV grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 50 Sqmm to 95 sqmm, Indoor/Outdoor type

Supply, laying, testing and comissioning of cable XLPE insulated screende, PVC bedded galvanised steel strip or wire moured, electric power cable heavy duty with standard aluminimum conductor 1100 Volt grade of size 3.5 Core , 300 Sqmm

Supply, laying, testing and comissioning of cable XLPE insulated screende, PVC bedded galvanised steel strip or wire moured, electric power cable heavy duty with standard aluminimum conductor 1100 Volt grade of size 400 Sqmm Single core

Supply, installation, testing and commissioning, factory made and tested, LT Panel, Outdoor type, platform mounted, suitable for 415 Volts, 3 Phase and neutral, 4 wire, 50Hz, AC supply system, having bus bar chamber with insulated electrolytic Aluminium bus bars, TPN, of capacity 1000 Amps rating, installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, made out of 2.00 mm thick CRCA mild steel sheet and mild steel & Mounting 75 mmX 50mm Channel frame work, front openable type, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 Sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The panel shall be suitable for accommodating and inclusive of following accessories

OUTGOING SUPPLY:- (ii) MCCB 250 Amps, thermal magnetic release 415 volts , 50Hz, 35 KA, 4 Pole = 2 No., (ii) MCCB 200 Amps, thermal magnetic release 415 volts , 50Hz, 35 KA, 4 Pole = 2 No (iii) MCCB 160 Amps, thermal magnetic release 415 volts , 50Hz, 35 KA, 4 Pole = 02 Nos., (iv) MCCB 100 Amps, thermal magnetic release 415 volts , 50Hz, 35 KA, 4 Pole = 01 Nos., (v) MCB 32 Amps, 415 volts , 50Hz, 10 KA, TPN = 02 No.

Supply and installation, testing, commissioning outdoor type feeder piller Box made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply factory made & MS angle section 40 x40x 5mm frame with front and back openable double door with provision of locking arrangement dust & varmin proof , gasket, Aluminium 600 Amp TP busbar & 400 Amp for Neutral shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof duly spray painted inside and outside of panel with one coat of red oxide primer and two coat of synthetic enamel paint grey complete all as specifed and directed & Connisting of the following equipments:- (i) MCCB , 4 Pole , 35 KA , 250 Amp -01 No ( Incomming) (ii) MCCB , 4 pole , 16 KA, 160 Amps -02Nos (iii) MCCB, 4 Pole , 16 KA , 125 Amps - 03 Nos (iii) MCCB, 4 Pole , 16 KA , 63 Amps - 03 Nos (vi) Indication Lamp 22.5 mm dia LED type 240Volts AC to show three phase availability- 01 set MAKE : L & T/Secure/Conserv (vii) Solid aluminium bus bar 600 Amp for 3 phase , 400 Amp for neutral (viii) PCC and block Mesonry work for grouting of panel complete all as specified and directed by Engg-in-charge.

Supply, installation, testing and commissioning 315 KVA, 11/0.433KV, AN, Oil Type Transformer with corrugated off circuit tap links of rating +5 to - 5% @2.5 %.by means of hand operated off load tap changing gear 315 kVA capacity transformer copper wound step down outdoor type, 11000/433 Volt (at no load), double wound, oil immersed naturally cooled with external cooling tubes, core type delta connected on primary side (HV) and star connected on secondary side(LV) in accordance with vector symbol Dy-II (vector group) with neutral brought on secondary side (LV side) and having tapping changing at + /-7.5% in step of +/- 2.5 %, to be changed and the maximum temperature rise shall not exceed 45 degree centigrade in oil and 55 degree centigrade in HV/LV winding when measured by resistance method after continuous full load run in ambient temp of 40 degree centigrade and the transformer shall be comprised with the following standard fittings including necessary foundation with block masonry work complete all as specified and as directed with following specifications specified in Srl No 1.01 here-in-after:- Note:- Transformer shall be double copper wound (Level -02) as per IS : 1180 (Part -1) 2014 with HT, LT cable Box.

(i) Pressure Release Valve (ii) Thermometer pocket on tank cover (iii) Oil temperature indicator with 2 contacts alarm & trip (iv) Rating plate with terminal marking (v) Two earthing terminals on tank and cover to facilitate fixing of GI earth strip (vi) Oil level gauge (vii) Oil drain filter valve (viii) Lifting lugs (ix) Oil filter hole with cap/plug including connection complete (x) Four plain solid cast steel detachable rollers (xi) First fill of transformer oil confirming to relevant IS and testing up to 60 KV di-electric strength (xii) PCC Foundation with block masonry & Plaster work as per manufacturer's instruction and as directed.

Material & labour for GI steel tubing light grade for protection of cable/ earth continuty conductor fixed to poles/ walls/ roof or laid in floors, road, crossing or ducts fixed with clamps , bolts nuts and wahser etc complete all as specified and directed of pipes of size 80mm dia.

M/s R. K. Bhambri

M/S Sunil Steel Works

L G BUILDERS

M/s VINOD KUMAR SHARMA

M/S Chhavi Constructions Co

M/S ANIL KUMAR

Global Enterprises

tarun construction co