Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.1 L+₹89,750 (3.56%)Rejected-AOC H NO 1366 3 GALI NO 6 MATA ROAD NEAR HAPPY MODEL SCHOOL RAJIV NAGAR GURGAON 122 001 HARYANA | GURGAON | GURGAON | HARYANA | 122001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹29.7 L+₹4.5 L (17.8%)Rejected-AOC | L3 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹95,600
Closing Date
6 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (P) AF Gurgaon
GE (P) AF Gurgaon Near Atul Kataria Chowk
GE (P) AF/GUR-20/2022-23 PERIODICAL SERVICES USING SMART PERIODICAL METHODOLOGY IN ADMIN, DOMESTIC AND H-BLOCK AREA AT AF STN GURGAON UNDER GE (P) AF GURGAON
2022_MES_522876_1
GE (P) AF/Gur-20/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (P) AF Gurgaon
All as per NIT
10 documents required · 10 mandatory
₹500
GE (P) AF Gurgaon
₹95,600
Yes
20 Jun 2022
9 May 2022
8 Jun 2022
9 May 2022
6 Jun 2022
23 May 2022
60 days
Amount
M&L for preparation of plastered or un plastered old decorated surfaces of walls by Vacuum based sanding machine all as specified, removal of nails etc & filling cracks/hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of plastered or un plastered old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescence sailts and trading oil and greasy spots by scraping with Vacuum based sanding machine, washing with water all as specified, filling cracks/hole by applying wall care putty and applying one coat cement base paint complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of plastered or un plastered old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescence sailts and trading oil and greasy spots by scraping with Vacuum based sanding machine, washing with water all as specified, filling cracks/hole by applying wall care putty and applying two coats cement base paint complete all as specified & directed by Engineer-in-Charge.
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine complete all as specified, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 1mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint 100% acrilic of approved white or coloured over a coat of approved primer by auto roller complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of plastered or un plastered old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescence sailts and trading oil and greasy spots by scraping , washing with water all as specified, filling cracks/hole by applying wall care putty and applying one coat white wash complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of plastered or un plastered old decorated surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescence sailts and trading oil and greasy spots by scraping , washing with water all as specified, filling cracks/hole by applying wall care putty and applying two coats white wash complete all as specified & directed by Engineer-in-Charge.
M&L Preparation old decorated surfaces on ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of steel & steel based surface of any description no otherwise described over 10 cm width & girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of old painted surfaces of steel & steel based surface of any description no otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparation old decorated brick, concrete, asbestos or plastered surfaces of walls and cornices spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coats of synthetic enamel paint of any tin or shade complete all as specified and directed by Engineer-in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for glazed ceramic colour tiles in patches matching with existing tile 600x300x7mm or 450x300x 7mm size as in walls set and jointed in neat cement slurry over 10mm thick recving in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed by Engr-in-Charge.
M&L for granite (any type) having thickness not below 20 mm thick in machine cut laid over cement screed bed 10 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including miror polishing and bullnosing where required edging in any position etc all as directed by Engr-in-Charge.
M&L for 20-22 mm thick machine cut kota stone slab flooring in patches over 15 mm thick thick cement screed bed in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and polishing complete all as directed by Engr-in-Charge.
M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Taking down cement or cement lime plaster of any description on bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick rendering other then fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-in-Charge.
M&L for 10 mm thick rendering on ceiling etc surfaces in CM 1:4, finished even and smooth (without using extra cement) all as specified and directed by Engineer-in-Charge.
M&L for Preparing Newly Plastered Surfaces of WALLS and applying TWO COATS of CEMENT BASE PAINT over a Coat of APPROVED PRIMER, complete all as specified and as directed by Engineer-in-Charge.
M&L for Preparing Newly Plastered Surfaces of WALLS and applying TWO COATS of WHITE WASHING, complete all as specified and as directed. by Engineer-in-Charge.
M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge.
The following works to be carried out in 60000 ltr RCC OHT 15m staging shaft type including necessary scaffolding in "H" block are all as directed by Engr in charge (i) Two coat of exterior emulsion paint on all external surfaces of RCC tank (ii) Two coat of white wash on vertical surfaces and bottom dome of tank inside the shaft (iii) Two coat of synthetic emulsion paint on all steel surfaces internal and external (iv) Letter writing 60cm height in two coat of synthetic enamel paint ( 50000 ltr water capacity) (v) two coat of synthetic enamel paint on all CI pipes (vi) Minor leakage to be repaired with epoxy injections (vii) The work will be carried entire satisfaction of Engr in charge.
S&F in repair 4 to 5 mm thick looking mirror of best approved quality size 650x450mm fixed on 6mm BWR ply and 35 to 40mm wide PVC frame complete all as specified and directed by Engr-in-charge . Make : Modiguard/Sant Gobin/Swastik.
S&F in repair, curtain rails stainless steel with fixing brackets stops, rollers palmets etc at every 1.2m both side, complete all as specified and directed by Engineer-in-Charge.
M&L for preparetion of old surface and rewriting letters of existing writing or figures in synthetic enamel paint (Block, roman, italic or Indian ) not exciding 30 cms high complete all as specified and directed by Engineer-in-Charge.
S&F in repair aluminium alloy door seal 1m long fixed to wooden doors complete all as specified and as directed by Engineer-in-Charge.
S&F in repair stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engr-in-Charge.
S&F in repair plastic WC seat cover of any colour for pedestial pan , closed pattern with flat bottom & cover including MS chromium plated ,aluminium hinging devices complete all as specified and as directed by Engineer-in-Charge.
S&F repair in of PTMT waste pipe 31/32 mm bore 80 cm long complete all as specified and as directed by Engineer-in-Charge. Make:- Pyrayag/ Shakti and equvalent
S&F in repair PTMT waste coupling 31/32mm bore of discharge (Half or full threaded) Min weight 45 gms, complete all as specified and as directed by Engineer-in-Charge. Make:- Pyrayag/ Shakti and equvalent
S&F in repair PTMT bib tap 15mm dia with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore, complete all as specified and as directed by Engineer-in-Charge. Make:- Pyrayag/ Shakti and equvalent
S&F in repair 10ltr capacity PVC valveless syphonic action type flushing systern low level white with inlet ball valve ,float & handle including brackets complete all as specified and as directed by Engineer-in-Charge. Make Prayag/ Hindustan/ Shakti/ Pearl
S&F towel Ring 600mm long of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats all as specified and directed by Engr-in-Charge. Make Nixo/ Hindware/Cera
S&F in repair one piece square model water closet floor mounted Square Commode (White) S trap - white ceramic western commode (white) shape-Elongated type, size 685x360x720mm weight not less 20 Kg 'S' trap and slim seat cover & fitting as per Cera Cat Part No S1013164 or equivalent complete all as specified and directed by Engr-in-Charge.
S&F in repair 2 in 1 bib taps 15mm bore long body cast copper alloy fancy type chormium plated butter fly handle screwed down including complete all as specified and as directed by Engineer-in-Charge.
S & F in repair stainless steel peg set hook rail 350 to 450 mm long having 6 to 8 prongs with 3 nos screws complete all as specified and directed by Engr-in-Charge.Make Nixo/ Hindware/Cera
Note The amount of Rs 10,837/- against Schedule of Credit on Page No 123 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance
PAWAN KUMAR
J D ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .