REPAIR TO CERTAIN BLDGS OF OFFRS/JCOS/ORS MD/OTM ACCN AND MISC WORKS AT MISTRY MARG AND OG LINES OF AGE B/R H/L UNDER THE AOR OF GE DEOLALI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 8 mm thick (square/rectangular) Vitrified ceramic tiles double charged area of each tile exc 0.18 sqm not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Ditto all as above but as in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Double charged/GVT Vitrified tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as above but in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

Ditto all as above but as in skirting over 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M & L for joint free non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6 or with chemical cement to match all as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 450X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, or similar works including necessary formwork complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as spd and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 20mm thick Rouber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60 mm thick Rouber mould with strength M-35 N/sqmm as in floor/pavement laid dry to the profile including 30mm thick stone dust sand cushioning complete all as specified and as directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappa stone slab 20-22mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for 16-18mm thick Granite Z black table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

M & L for 15 mm thick Artificial Granite of Ist quality any colour as in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S & F powder coated aluminum alloy interlocking snap grid 605mm x 605 mm consists of Main Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 605mm x 605mm complete all as specified and as directed of approved make.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.Make: Everest/ Armsrong or equivelent.

M&L of false ceiling in step(s) comprising of 12mm thick Gyp board including GI frame work for seamless ceiling made of GI perimeter channel 0.55mm thick with two unequal flange of 20 to 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screw at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flange of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thicknesshaving kurledweb of 50mm and flangeof 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre with and including two coats of plastic emulsion paint complete all as directed. Make-India Gypsum/Gyproc/Lafarge.(Note:- The measurement shall be made flat from wall to wall without considering step(s).

S&F for in repairs 5 to 8 mm thick interlocking PVC hollow wall panelling fixed with self tapping screw of approved colour and design complete all as specified and directed by Engr-in-Charge incl dismantling of old unserviceable board any tyupe .

S&F for 0.50mm thick GI channel sheet of width 35-45mm for wall panelling channel inclusive of fixing on to wall to make level complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

S&F 2nd class wood glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) including complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples/wooden beading etc as required at site complete all as specified and as directed. and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Cost of M.S. hold fast/ lugs or SS dash fasteners shall be included in quoted rates). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan

S&F 28-30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood polymer composite) 100 % solid decorative laminated both side flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder, rick husk, wheat husk) and on toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

S&F 30 mm thick moulded Prelaminated bothside WPC factory made 100% solid Glazed and skelton shutter door (conforming as per IS-4020) made from 100% lead free single extruded WPC incl WPC extruded board CNC machine cut jali fixed to Skelton door as per approved design complete all as specified and directed incl (double SS wire netting) stainless steel wire netting nominal dia of wire 1.40mm and size of mesh 12mm and over stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately).

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

M&L for preparation of untreated wooden and wooden based surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F powder coated aluminium sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkhats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire and average width of aperature 1.20mm, size of side rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.20mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick frosted glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F 4.00 mm disigner tinted glass thick area exc 0.50 Sqm in each pane with etching of approved design complete all as specified and directed

S & F 4.00 mm thick sheet glass area not exc 0.50 Sqm fixed in Door shutters shutters etc complete all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F in repair factory made 100 % Prelaminated solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of density 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F in repair factory made 100 % plain solid wood plastic composite (WPC) flush type shutter of 18mm thickness consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan.

S&F auto soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 450 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele

S & F powder coated aluminium doors, shutters, side hung type with sash bars, locking rails, locking arrangements including necessay jointing cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle 02 Nos,Mortice lock, 200 mm long tower bolt 02 Nos,Double action floor spring heavy duty,SS hinges etc for Each door with and including tintet sheet glass of 5.50 mm thick size of lock rails 44.45x81.50mm side rails 85x44.45mm top rail 83.5x44.45mm, bottom rail 101.6x44.45mm and size of chowkat of aluminium frame 101.6x44.45mm and thickness of aluminium member n less than 1.40mm thick complete fitting and fixture all as specified and directed.

S&F piano hing width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as spd and directed.

S&F Hasp and staple, safety type, MS with powder coated mild steel hinge pin including bolt to hinge plate and fixed with SS screws complete all as spd and directed.

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F 100 mm long butt hinges stainless steel medium weight complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed.

S&F aluminium alloy floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F in repair 150 mm long Extruded stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm long stainless steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 100 mm size stainless steel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F 150mm size stainless steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

M&L for 250mm long stainless steel sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F in repair 25 mm dia stainless steel curtain rod with decorative funnels complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets/wall to wall bracket where required suitable for 25mm dia curtain rod (minimum projection from wall 100 mm) fixed in wall including drilling, rawl plug, star screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 510mm x 510mm bowl size 460x460x230mm, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes coupling and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.

S&F vitreous china single piece EWC bowl with cistern for extended wall hung WC of Size: 380x630x770 mm, PP Soft Seat cover, Hinges, Fixing Accessories, Accessories Set, and dual Cistern fittings, P trap-180mm complete all as specified and directed Make Jaquar cat part No CNS-WHT-353SPPZ or CNS-WHT-755S220SPPZ Bowl with cistern for or equivalent in kohlar, grohe and Roca

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom,cover and mild steel chromium plated hinging device etc complete all as directed. Make Somany Cat Part No. SMART EWC P or S trap Equivelent in Cera/Hindware/Parryware

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and Stainless steel bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed.

S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as fixed complete all as specified.

S&F in rep vitreous china wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), white including connection to drain (or outgoing pipe) and to flushing pipe with and including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel hinges device complete all as specified and directed.

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy heavy duty, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge.

S & F in repair 15 mm bore, fancy type, chromium plated angle valve heavy duty , cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge.

S&F in repair for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed. Make : Prayag or equivalent.

S&F in repair for 15mm bore, 600 mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed. Make : Prayag or equivalent.

S&F in repairs Full pedestal wash basin with fixing accessories of Size 575 x 465x200 mm of jaquar Cat Pot No SLS-WHT-6801 with Full pedestal of Make Jaquar Cat Pot No SLS-WHT-6301 viterous china wash basin including fixing brackets, PVC waste pipe with necessary fittings ,32 mm bore brass CP waste couplings screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as spd and directed.

S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make : Prayag or equivalent.

S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. Make Prayag or equivalent .

S&F in repair Overhead Shower 120 mm round shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm casted 190 mm long flat shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified Make Jaguar (Cat part No : OHS-1663 & SHA 483 or equivalent in kohlar, grohe and Roca.

S&F sheet glass corner shelf wall mounted shelf assembly consisting of 5mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. Cat Part no CAN -1173 of jaquar or equivenet in Kohlar, grohe and Roca.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. Make : Prayag or Equivalent.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed.

S & F in repair for 15 mm bore, fancy type, Wall Mixer with provision for Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange complete all as specified and as directed by Engr-in-Charge .

S&F in repair 15mm dia brass chromium plated Sink Mixer With Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated two way bib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: ARI 39041 or equivalent in kohlar, grohe and Roca

S & F in repairs PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed.

S&F in repair 15mm dia brass chromium plated Central Hole Basin Mixer without popup waste system with 450 mm long braided hoses for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repairs 15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as directed.

Dismantling water tanks any type (RCC/PVC) incl disconnecting all connections of capacity exc 500 & not exc 1000 ltrs.

Dismantling water tanks any type (RCC/PVC) incl disconnecting all connection of capacity exc 250 & not exc 500 ltrs.

S&F rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20 mm bore complete for following capacity of tanks .

S&F rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks .

S & F in repairs ball valve high pressure of PTMT wiyh epoxy coated , aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete.( 210 gms weight ) complete all as specified.

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal to store 20mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixing and removal to store 25 mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

S & F 25 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Fixing only 25 mm bore tubes, any grade, to walls and ceilings or laying in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where required the sufraces for concelled water supply fitting complete all as specified.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 250Ltrs and n exc 500Ltrs capacity complete all as specified.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc exc 500Ltrs and n exc 1000Ltrs capacity complete all as specified.

S&F in repair 25mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F in repair PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F in repair PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F in repair for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc,incl replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421,incl PCC 1:2:4 type B-1 ( 20 mm graded stone agg ) 40mm thick and rendering again 15 mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, incl replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, incl PCC 1:2:4 type B-1 ( 20 mm graded stone agg ) 40mm thick, and rendering again 15 mm thick in CM (1:4) mixed with WPC Conplast - 421, (Note:- Floor area shall be considered for measurement & payment purpose) complete all as specified and as directed.

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.47 to 0.50 mm thick galvanised with 150 AZ quality of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws incl filling of gaps between wall and sheet with PCC 1:2:4 ( 20 mm graded agg)/ brick work CM 1:4 and plastering the surfaces with CM 1:4 on both side where required cost of the same shall be deemed to be included in quoted rate complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47 to 0.50 mm thick galvanised with 150 AZ quality of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed.

M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 10 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc complete all as specifed and directed.

M&L for Rendering 15mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces etc finished surfaces even and smooth complete all as specifed and directed.

M&L for applying plaster of paris putty two coats over plastered surface to prepare the surface even and smooth incl sandind rubbing complete all as spd and directed.

M&L preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete all as spd and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as spd and directed.

Ditto all as per above but except bricks complete all as spd and directed.

M&L for applying two coats of weather emulsion (APEX or Equivalent, white/red colour or as specified and directed by Engr-in-charge) " over two coat of primer including preparation of decorated plastered surfaces of walls/ceiling complete all as specified and directed.

M&L Complete removal of existing treatment of wall incl removing unnecessary nails filling holes etc complete all as specified and as directed.

M&L Preparation of plastered or unplastered surfaces including Washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil emulsion distemper (white or tinted) on walls complete all as specified and as directed.

S&F of 5mm thick ACP( aluminium composite panel) sheet on wall/coloumn/roof required to fixed with screws with required any shape icluding joint filled with silicon as approved of colour by GE and complete all as specified and directed.

M&L for applying 1.5 mm thick wall care putty on wall/ceiling surfaces incl sanding and rubbing complete all as spd and directed.

M&L for preparation of plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as spd and directed.

M&L preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of white wash including washing, rubbing down, scraping complete all as specified & directed by Engineer -in-charge.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and fair and laid in alternate bays complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for

One light/Fan point controlled by one switch.

All as per Item No-144 but One light point controlled by two two way switches.

All as per Item No-144 but One 3 pin socket outlet 5 Amps on the same board.

All as per Item No-144 but One 3 pin socket outlet. 5 Amps on the independent board

All as per Item No-144 but One bell point controlled by one switch

One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

One 15 A socket outlet on the same board with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

One light/fan/bell point controlled by one by one way switch.

ditto- as above item No150 but One 3 pin socket outlet 5 hole 5 Amp independent board socket & switches to be measured and paid separately.

ditto- as above item No150 but Same board.

-ditto- as above one power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, stranded conductor as earth wire connected to dolly complete.

Supply and fix switch piano flush type single pole one way 6 Amps complete all as specifed .

Supply and fix switch piano flush type single pole two way 6 Amps complete all as specified .

Supply and fix Bell push button 5 Amp, flush type complete all as specified .

Supply and fix Bell, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L for switch socket combination 3 pin 6 Amps flush type (multi purpose ) complete all as specified and as directed.

M & L for switch socket combination 2 in 1, 3 pin, 5 and 15 amp flush type universal complete all as specified and as directed.

M & L for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S&F electronic step type Fan regulator flush type (speed regulation in 5 steps) 120 watts complete all as specified and as directed.

S & F lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S & F LED Tube rod light double side connection T-8, 18 watt Suitable for 4 feet long frame all as specified and directed.

S&F wall mounted LED Light fittings, 4 feet long, with 18 W LED tube rod and box type batten double side connection type complete all as specified and directed.

S&F wall mounted LED Light fittings, 2 feet long, 9 W, polycarboate housing and integrated electronic driver complete all as specified and as directed.

S&F Decorative wall light fixture, madeup of polycarbonate and incl with 10 Watt LED lamp (B22 base)all as specified and directed .

S&F Building security light fittings, with pressure die cast aluminium housing, suitable for 36 W LED, complete pre-wired, incl suitable bracket for fixing light on wall or any indicated locaction all as specified and as directed.

S&F in replacement Post top, (Coral Opal) landscape luminare with high power LED 25 W making arrangement for fixing light fittings on pole/stand post/pillar with GI pipe all as specified and directed

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB DB SPN 4 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix in repair MCB triple pole and neutral 415 V 63 Amps complete all as specified and directed.

Supply and fix in repair MCB SPN 40 to 63 Amps, 240 volts complete all as specified and as directed.

Supply and fix in repair MCB SP 5 to 32 Amps, 240 volts complete all as specified and as directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per item No - 174 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

All as per item No - 174 above but with 2 runs of 2.5 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

M&L for Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete, all as specified and testing on completion.

Note: Amount of sch of credit of Rs.64273/-will be deducted from total amount of BOQ.

M/S SUJAL ENTERPRISES (BID ID -3119738)

Vinod Enterprises (BID ID -3104992)

J Sams Contructions (BID ID -3103271)

M/S Chandan Construction Company (BID ID -3119434)

M/S R.K.S. CONSTRUCTION (BID ID -3119228)

M/S B R BHALERAO (BID ID -3118939)

N K ASSOCIATES (BID ID -3105218)