PROVN OF OPEN SHED, GUARD ROOM, STORE ROM, TOILET, 30 X EXHAUST FANS, 06 X GEYSERS OF 25 LTRS AND INSTALLATION OF 08 X GEYSERS AT OLD C ZONE UNDER AGE B/R-II AT BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Surface dressing n. exc. 15 cm deep in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface for soft/loose soil.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L hardcore of broken stone or boulders gauge n exc. 63 mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved built in CM 1:4 as in half brick thick walls complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast, fitting of pressed steel chowkhat and the like including weathering, slightly rounded or chamfered angles and throating, including formwork if required complete all as specified and directed.

M&L for 25 mm thick PCC 1;2;4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick in rough finish of concrete surface etc., complete all as specified and directed.

Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed.

M&L for R.C.C M-25 (Design Mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L for R.C.C M-25 (Design Mix) using 20mm graded crushed stone aggregate for Columns, pillars, piers, posts etc all as specified and directed.

M&L for R.C.C M-25 (Design Mix) using 20mm graded crushed stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc all as specified and directed.

M&L for R.C.C M-25 (Design Mix) using 20mm graded crushed stone aggregate in Chajja etc all as specified and directed.

M&L for R.C.C M-25 (Design Mix) using 20mm graded crushed stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 24.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L 100mm thick PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in flooring complete all as specified and directed.

M&L 100mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in subbase of floor complete all as specified and directed.

Supply only glass dividing strips 3mm thick and 38mm wide complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

S&F roof trusses (farmed), trusses purlins, crane gantries, rails and fastenings and heavy bracket framing MS tubes medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat , MS plate etc including necessary welding, fittings etc Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed.

S&F for rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and as directed

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm complete all as specified and directed.

M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc.for post (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming Fe-410W(GdeE-250) quality B complete all as specified and directed.

M&L for rolled mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes including screw bolt with hexagonal at one end and screwed with washer and nut fitted Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) complete as specified etc complete all as specified and directed.

S&F Pre-painted coloured plain Galvalume / Zincalume sheet with min thickness of 0.60 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof ridge colour/exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron poyster back coat applied over 5 micron primer, all fixed with Galvanised self drilling self tapping fastener (12-14 x 55 with EPDM seals) complete as specified etc complete all as specified and directed.

M&L for providing one coat of approved bituminous primer on roof surface @0.40 ltr/sqm and over the primed surface 3 mm thick APP polymer membrane weighing not less than 3.5 Kg/Sqm reinforced with polyster non wooven fabric weight not less than 160 gm/Sqm. The polymeric membrane shall be laid by torch applications method. The side overlap shall be minimum 75mm and the end laps shall be 100 mm and all overlap shall be sealed as per manufacture instructions. (For parapet membrane shall be taken to a height as per site and then in sorted in parpet by making groove. The same shall be finished by a flashing membrane complete all as specified and directed.)

S&F standard powder coated aluminium section and shall be approved by Garrison Engineer as in frame for partition, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass and stainless steel wirecloth and particle board, etc complete all as specified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and particle board shall be measured and paid separately under respective items. (iii) The accessories required to be provided for partition as per directions of Engineer-in-chargeshall be provided but weight for the same shall not be considered and no extra cost will be paid.

S&F Prelaminated particle board 9mm thick, interior grade, prelaminated both sides with decorative choice laminations , fixed with screws or joining cleats to aluminium frame work complete all as specified and directed.

S&F 5.50mm thick sheet glass of ordinary quality plain or tinted and glazing with oil putty or Rubber gasket to steel frame or Aluminum Door/window section in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F Mortice lock, Brass vertical type, size 75 mm complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc including screed bed mortar 15 mm thick in CM 1:6 complete all as specified and directed.

Ditto all as per item No. 46.00 here-in-before but in vertical surfaces such as dado/skirting over rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick, (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc., including screed bed mortar 15 mm thick in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc over rendering 10 mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed mortar 20mm thick in CM 1:6 complete all as specified and directed.

Ditto all as per item No.50.00 here-in-before but as in skirting.

M&L for Granite (of any type) tiles 16-18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

Cutting, chases, pinning in, block masonry wall for concealed wiring and making good to facing and pointing in cement mortar 1:3, cutting n. exc. 10 cm girth all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed (Notes : WPC shall be measured and paid seperately)

Supply only water proofing compound (Liquid) complete all as specified and as directed.

M&L for preparing new plastered on wall and applying three coats of white wash complete all as specified and directed.

M&L for applying three coats of colour wash on walls including preparation of new or previously untreated surfaces.complete all as specified and directed.

M&L for newly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint etc over a coat of wall care putty complete all as specified and directed.

M&L for preparing new plastered on ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint etc., complete all as specified and directed.

S&F 6 mm thick non-asbestos fiber cement building boards (6mm thick pre-painted designed type E-Board), fixed or laid /inserted to timber /GI /Aluminium frame-work with screws complete all as specified and directed.

S&F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and directed.

S&F factory made solid panelled PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail ,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and joint together with solvent cement, etc complete all as specified and directed.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed.

S&F hard drawn steel wire fabric in available size weight per sqm n exc 4 kg /sqm fixed in tank caging including welding, riveting, framing etc all as directed complete all as specified.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE-410W (Gde-E-250) all as specified and directed.

S&F in steel ventilator with top hung shutter including hinges steel peg staycomplete all as specified and directed.

S&F 4mm thick plain glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F 4mm thick one side frosted glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F of Aluminium anodised, 150 mm barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 100 mm Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described for two coat of Synthtic Enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and directed.

M&L Vitreous China wash down water closet pan (European type), white (excluding fixing bolts and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, Make Hindware Combo Model: Element Cat No : 92082 Size 74.5 x 36 x 68 cms

S&F PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all as specified and directed.

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urianl against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. (Make: Hindware/Cera/Parryware)

S&F chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F in 15 mm Stop valves, cast copper alloy with chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

Ditto all as per item No.91.00 here-in-before but 20 mm dia bore of pipe.

S&F rotational moulded PVC water storage tank 500 ltrs capacity conforming to IS-12701(1989) cylindrical vertical type double-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm bore iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggrgates ) set in CM 1:4 as in landing, cover slab (for manholes etc) chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and as directed

M&L for providing Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channel and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth using extra cement including forms moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 as in bed to drain pipe including packing under haunching against sides of pipe after laying in trenches for 150 mm dia bore drain pipe including testing complete all as specified and directed.

S&F 150 mm dia SGSW pipe grade 'A' laid in trenches including jointing with cement mortar 1:1 complete all as specified and directed.

S&F 100 mm dia cast iron (sand cast) soil waste and vent pipes in any length fixed with cement joints laid in trenches or in floor complete all as specified and directed.

Ditto all as per item No.100.00 here-in-before but fixed in wall

S&F cast iron bend (Sand cast) of any radius with oval access door including jointing with cement joints for (100 mm bore) complete all as specified and directed.

S&F 100mm bore cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches jointing with cast iron pipe etc complete all as specified and directed.

S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed

S&F 110mm bore PVC (SWR) `P' or 'S' trape complete all as specified and directed

S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S & F 100 mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 1:2:4 complete all as specified

M&L Rendering 10mm thick of CM 1:3 on ceiling surfaces other than fair faces of brick work and surfaces finished even and smooth without using extra cement complete all as directed

M&L for vitrified ceramic tiles (light sheds) 9 to 10mm thick (squar/rectangular) polished, area or tiles n.exc 0.36 sqm in floors etc set one jointed in neat cement slurry are pointed white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic tiles (light sheds) 9 to 10mm thick (squar/rectangular) polished of size 600 x 150mm in skirting etc set one jointed in neat cement slurry one pointed in white or coloured cement to match complete all as specified and directed.

SCHEDULE 'A' PART-II (E/M WORKS)

M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including modular swtch boards concealed type, readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed.

All as per item No 115.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed.

All as per item No 115.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed.

All as per item No 115.00 here-in-before but for one 15 Amp 3 pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

S&F switch modular type single pole one way 6 amps complete all as specified and directed.

S&F switch modular type single pole one way 16 amps complete all as specified and directed.

S&F socket outlet modular type 6 amp 2/3 pin combined 2 module complete all as specified and directed.

S&F socket outlet modular type 6A/16A 2/3 pin combined 2 module complete all as specified and directed.

S&F modular electronic step type fan regulator 5 step not less than 100 W complete all as specified and directed.

S&F modular blank plate 1 module complete all as specified and directed.

S&F modular type white cover plate with frame 3 module complete all as specified and directed.

S&F modular type white cover plate with frame 4 module complete all as specified and directed.

S&F modular type metal box 3 module complete all as specified and directed.

S&F modular type metal box 4 module complete all as specified and directed.

S&F ceiling rose surface bakelite three terminals complete all as specified and as directed.

S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed.

S&F switch socket outlet combination 3 pin 5/6 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F switch socket outlet combination 6 pin 5/15 amp, flush piano unoversal type controlled by one switch conforming to IS complete all as specified and as directed.

S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed. Make:- CG Cat Part No -LCTL-18-CDL or equivalent model of Philips / Bajaj /Surya

S&F LED Downlighter with Al -housing Model ;CROM ROUND cat Part No LCDN-12-CDL/TL/WW of make CROMPTON or equivalent model of Philips / Bajaj /Surya complete all as specified and directed.

S&F Building security LED light luminaire fitting 1X20 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 25 mm GI bracket medium grade 1m long bent to shape including bolt, nut, washer, clam made out of MS flat of size 25X3 mm, 4 nos Anchor Bolt of suitable size etc complete all as specified and directed. Make:- CG MODEL LST 20 CDL/ SURYA MODEL SLE UL 20 W IP66 LXN or equivalent model of Philips / Bajaj

S&F 3-Star, ISI Marked Ceiling fan of size 1200 mm sweep, white in colour, 230 volts AC with connection from ceiling rose. Make- Usha, Model No. TECHNIPLUS 5 Star ISI marked or equivalent model of Havells/Crompton/Orient complete all as specified and as directed.

S&F in replacement Exhaust Fan of Size 300mm sweep, 230Volts AC, PVC Body with connection from existing ceiling rose including cutting hole and making good distrurbed surface and necessary fixing arrangement complete all as specified and directed.

S&F metallic Exhaust Fan of Size 300mm sweep, 230Volts AC, with louver shutter / grill and connection from existing ceiling rose including cutting hole and making good distrurbed surface and necessary fixing arrangement complete all as specified and directed.

S&F Geyser 25 ltr capacity vertical type with BEE 5 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safety valve, hot and cold water CP flexible pipe etc and fixing along the wall complete all as specified and directed. (Make:- USHA, Model Mystry or equivalent model of V-Guard / Recold / Havells / Bajaj)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4 sqmm as earth continuity conductor drawn through PVC conduit ISI marked complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) For concealed sub-main wiring cutting chases shall be included in rate. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F single pole and neutral enclosure with a two pin and earth plug socket with double pole one MCB of 16/25 amp complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, Double door Triple pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed.

S&F in replacement MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA Cat No 408700-02, make: Legrand or equivalent model of L&T, C&S, Indoasian

S&F in replacement MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408628-36 or equivalent model of L&T/ C&S/ Indoasian

S&F MCB 'C' series SPN 20 to 40 Amps, breaking capacity 10KA complete all as specified and directed. Make:- LEGRAND/L&T/ C&S/ Indoasian

S&F in replacement MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408587-95 or equivalent model of L&T/ C&S/ Indoasian

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Supply & Laying Sub Class 'B' Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed.

M&L for XLPE insulated GI wire/strip armoured electric power cable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part I including necessary excavation and earth work in any type of soil PCC (1:3:6) type C-1 chamber with 40 mm thick pre cast RCC (1:2:4) type B-1 cover slab with TMT bar 8mm dia 150mm long reinforcement, watering funnel, 40mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

M&L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in making good the rood/path and similar work complete all as specified and directed.

S&F medium grade galvanized steel tubing 25 mm dia bore of pipe (ISI Marked) with all fittings laid in trenches complete all as specified and directed.

Ditto all as per item No.153.00 here-in-before but 20 mm dia bore of pipe.

S&F hot and cold water connection pipe complete all as specified and directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valves, cast copper alloy, screwed down, CP, fancy type, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm iron pipe or for unions and fixed complete all as specified and directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20 mm iron pipe or for unions and fixed complete all as specified and directed.

S&F gun metal glove or gate valve 15mm bore, with iron wheel head, screwed down both ends for iron pipe and fixed complete all as specified and directed.

S&F bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and directed.

S&F gun metal glove or gate valve 25mm bore, with iron wheel head, screwed down both ends for iron pipe and fixed complete all as specified and directed.

Paritosh Saha

M/S DUTTA CONSTRUCTION CO

GURUNG CONSTRUCTION

PRADIP KUMAR BOSE

MUKHERJEE ENTERPRISE

M/S CONTRACTS

M/S KAR CONSTRUCTION