West Bengal

Financial BO

Works

Electrical Work/ Equipment

WBPHE/EE/SMD/NIeT-19 of 2026-27/3

Public Health Engineering Department

Gosaba | Kolkata, West Bengal

Amount: Refer DocsCloses: 29 Aug 2026Closed

Timeline

Published5 Aug 2026
Closed29 Aug 2026
Technical Evaluation25 Sept 2026
Financial Evaluation28 Sept 2026
Award—

Bids

Item Rate

3 Bids28 Sept 2026

#	Company	Amount	Rank	Status
1	B T PROJECTS PRIVATE LIMITED L1₹5.5 LAdmitted-Finance 6 KRIPANATH DUTTA ROAD KOLKATA 700 002 \| KOLKATA \| KOLKATA \| WEST BENGAL \| 700002	₹5.5 L	L1	Admitted-Finance
2	WEST BENGAL ENGINEERING CO. L2₹5.7 L+₹19,395 (3.52%)Admitted-Finance 138 CANNING STREET GROUND FLOOR KOLKATA \| KOLKATA \| WEST BENGAL	₹5.7 L+₹19,395 (3.52%)	L2	Admitted-Finance
3	DEY ENTERPRISE L3₹5.7 L+₹20,305 (3.69%)Admitted-Finance 00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 \| PASCHIM BARDHAMAN \| WEST BENGAL \| 713372	₹5.7 L+₹20,305 (3.69%)	L3	Admitted-Finance

BoQ Comparative

Line Items (17)

Sl No	Description	Qty	Unit	B T PROJECTS PRIVATE LIMITED L1	DEY ENTERPRISE L3	WEST BENGAL ENGINEERING CO. L2
1.00Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]
1.01	Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ] The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ]	1	each	2,62,000 ₹2,62,000 Lowest	2,62,250 ₹2,62,250	2,62,200 ₹2,62,200
1.02	3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe	50	each	1,045 ₹52,250 Lowest	1,055 ₹52,750	1,052 ₹52,600
1.03	3"(80 mm.) MS 90° Bend	2	each	315 ₹630 Lowest	332 ₹664	330 ₹660
1.04	3"(80 mm.) MS IS Companion flange (16 mm thickness)	8	each	400 ₹3,200 Lowest	408 ₹3,264	405 ₹3,240
1.05	4" (100 mm) MS IS Companion flange (16 mm thickness)	1	each	540 ₹540	532 ₹532	530 ₹530 Lowest
1.06	100 mm X 80 mm MS reducer (Heavy type)	1	each	1,560 ₹1,560 Lowest	1,625 ₹1,625	1,620 ₹1,620
2.00Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.
2.01	3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	1	each	6,000 ₹6,000 Lowest	7,100 ₹7,100	7,050 ₹7,050
2.02	6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	2	each	15,000 ₹30,000 Lowest	17,750 ₹35,500	17,700 ₹35,400

Tender Value

Refer Docs

EMD Value

₹13,600

Closing Date

29 Aug 2026, 2:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer SMD PHE Dte

Address

Chetla

Work Description

Providing additional arrangement of Raw water Pumping system at Gosaba Pond Based Water Supply Scheme from Pond no 4 at Gosaba Block under South 24 Pgs Mechanical Division, PHE Dte.

Tender Information

Tender ID

2026_PHED_1036370_3

Reference Number

WBPHE/EE/SMD/NIeT-19 of 2026-27

Tender Type

Open Tender

Product Category

Electrical Work/ Equipment

Form of Contract

Item Rate

Period of Work

60 days

Location

Gosaba

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredNIeT, WBF 2908/ WBF 2911, TC, Affidavit, Pre Qualification (.pdf)

RequiredEMD, PAN, Trade License, Supervisor License (.pdf)

RequiredPartnership Deed with Memorandum, Credential Certificate, Completion Certificate (.pdf)

RequiredEPF, ESIC details, GST, P Tax, IT Return and PL Balance sheet Last 5 Yrs with IT Acknowledge (.pdf)

RequiredCorrigendum (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹13,600

Important Dates

Last Activity

28 Sept 2026

Published

5 Aug 2026

Bid Opening

31 Aug 2026

Download Starts

5 Aug 2026

Download Ends

29 Aug 2026

Submission Starts

5 Aug 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (10 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]
1.01	Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ] The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ]	-	each	-	-
1.02	3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe	-	each	-	-
1.03	3"(80 mm.) MS 90° Bend	-	each	-	-
1.04	3"(80 mm.) MS IS Companion flange (16 mm thickness)	-	each	-	-
1.05	4" (100 mm) MS IS Companion flange (16 mm thickness)	-	each	-	-
1.06	100 mm X 80 mm MS reducer (Heavy type)	-	each	-	-
2Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.
2.01	3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	-	each	-	-
2.02	6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	-	each	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Technical Evaluation

tech_eval.pdf

PDF

Financial Bid Opening

fin_bid_open.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.45 MB

Tendernotice_2.pdf

PDF • 0.25 MB

Work Item Documents

BOQ_2545895.xls

BOQ • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

B T PROJECTS PRIVATE LIMITED

L1₹5.5 LAdmitted-Finance

6 KRIPANATH DUTTA ROAD KOLKATA 700 002 | KOLKATA | KOLKATA | WEST BENGAL | 700002

WEST BENGAL ENGINEERING CO.

L2₹5.7 L+₹19,395 (3.52%)Admitted-Finance

138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL

DEY ENTERPRISE

L3₹5.7 L+₹20,305 (3.69%)Admitted-Finance

00 DEY ENTERPRISE SODEPUR 9 10 PITS COLLIERY ASANSOL BARDHAMAN WEST BENGAL 713372 | PASCHIM BARDHAMAN | WEST BENGAL | 713372

Sl No	Description	Qty	Unit	B T PROJECTS PRIVATE LIMITED L1	DEY ENTERPRISE L3	WEST BENGAL ENGINEERING CO. L2
1.00Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]
1.01	Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ] The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ]	1	each	2,62,000 ₹2,62,000 Lowest	2,62,250 ₹2,62,250	2,62,200 ₹2,62,200
1.02	3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe	50	each	1,045 ₹52,250 Lowest	1,055 ₹52,750	1,052 ₹52,600
1.03	3"(80 mm.) MS 90° Bend	2	each	315 ₹630 Lowest	332 ₹664	330 ₹660
1.04	3"(80 mm.) MS IS Companion flange (16 mm thickness)	8	each	400 ₹3,200 Lowest	408 ₹3,264	405 ₹3,240
1.05	4" (100 mm) MS IS Companion flange (16 mm thickness)	1	each	540 ₹540	532 ₹532	530 ₹530 Lowest
1.06	100 mm X 80 mm MS reducer (Heavy type)	1	each	1,560 ₹1,560 Lowest	1,625 ₹1,625	1,620 ₹1,620
2.00Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.
2.01	3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	1	each	6,000 ₹6,000 Lowest	7,100 ₹7,100	7,050 ₹7,050
2.02	6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	2	each	15,000 ₹30,000 Lowest	17,750 ₹35,500	17,700 ₹35,400

Sl No

Description

Qty

Unit

B T PROJECTS PRIVATE LIMITED

DEY ENTERPRISE

WEST BENGAL ENGINEERING CO.

1.00Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]

1.01

Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ] The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ]

each

2,62,000

₹2,62,000

Lowest

2,62,250

₹2,62,250

2,62,200

₹2,62,200

1.02

3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe

each

1,045

₹52,250

Lowest

1,055

₹52,750

1,052

₹52,600

1.03

3"(80 mm.) MS 90° Bend

each

315

₹630

Lowest

332

₹664

330

₹660

1.04

3"(80 mm.) MS IS Companion flange (16 mm thickness)

each

400

₹3,200

Lowest

408

₹3,264

405

₹3,240

1.05

4" (100 mm) MS IS Companion flange (16 mm thickness)

each

540

₹540

532

₹532

530

₹530

Lowest

1.06

100 mm X 80 mm MS reducer (Heavy type)

each

1,560

₹1,560

Lowest

1,625

₹1,625

1,620

₹1,620

2.00Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.

2.01

3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]

each

6,000

₹6,000

Lowest

7,100

₹7,100

7,050

₹7,050

2.02

6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]

each

15,000

₹30,000

Lowest

17,750

₹35,500

17,700

₹35,400

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]
1.01	Submersible Dewatering Pump of Capacity : 200 – 1200 LPM , Head : 39 – 20 MTRS ., outlet size : 80 mm, 2850 RPM suitable for 415 Volts, 3 Phase, 50 Hz. A.C. , D.O.L. Starting , Dry type motor with 10 Mtrs. Cable ; [ Make- Darling(DJ 102 ) / any other approved make of similar specification ] The motor should have i) inbuilt controller i.e. protection againsts dry running , overloading , mechanical jamming etc ,ii) Capable of withstanding wide voltage fluctuations, iii) Heavy duty ball bearing at TOP & bottom ; iv) suitable for vertical type installation .. [Materials Data :::: Impeller : CA-15 / CF8/CF8M ;; Shaft : AISI-410/ SS304 / SS-316 :: Difusser : Various grades of CI / AL / SS ;; Wear Plate :Various grades of CI / SS ; Mech. Seal : Sic v/s Sic / Tc v/s Tc ;; Process Data :::Liquid temp.: Max. 40 deg. cent. ;; Suitable for Liquid pH : 6 to 8 ; ; strainer Hole Size : upto 16 mm ]	-	each	-	-
1.02	3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe	-	each	-	-
1.03	3"(80 mm.) MS 90° Bend	-	each	-	-
1.04	3"(80 mm.) MS IS Companion flange (16 mm thickness)	-	each	-	-
1.05	4" (100 mm) MS IS Companion flange (16 mm thickness)	-	each	-	-
1.06	100 mm X 80 mm MS reducer (Heavy type)	-	each	-	-
2Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.
2.01	3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	-	each	-	-
2.02	6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]	-	each	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supply & delivery of following pumping machinery at site as per following :- [(Make- Any approved vendor of PHED) ; ( Rate is inclusive of riverine charges @ 5.0 %)]

1.01

each

1.02

3"(80 mm.) Dia 4 mm thick Heavy Ms Black Pipe

each

1.03

3"(80 mm.) MS 90° Bend

each

1.04

3"(80 mm.) MS IS Companion flange (16 mm thickness)

each

1.05

4" (100 mm) MS IS Companion flange (16 mm thickness)

each

1.06

100 mm X 80 mm MS reducer (Heavy type)

each

2Single door CIDF Non Return valve - Cast iron double flanged single door swing non-return valve generally conforming to IS:5312 Part I, having body, door, cover in graded cast iron to IS:210 Gr.FG200, body and door rings & bearing block of leaded tin bronze to IS:318 Gr.LTB 2 (350mm & above), hinge pin of st.st.AISI410, valve suitable for a maximum working pressure of 10/16 kg/cm2 (Seat test) & body tested to 15/24 kg/Sqcm.

2.01

3"(80 mm.) CIDF Non Return valve (PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]

each

2.02

6'(150 mm ) CIDF Non Return valve ( PN 1.0 ) (Rate is inclusive of riverine charges @ 5.0 %)]

each