WBPHED/EE/07_06/BOLMD/25-26

Amount

Supply and delivery of following items:-

Submersible pumping machinery directly coupled with water proof suitable size motor having following specification :- Pump:Duty condition - 15 m3/hr Head Range- 21Mtr Shaft-stainless steel Impeller- S.S / GM/ Noryle Outlet Size: 65mm / 80mm. Motor:Submersible type 3 Ph , 50Hz, 415 Volt ± 10% 2900 RPM Motor must be suitable for operation with DOL starter.(Test certificate along with characteristic curve should be submitted at the time of delivery).

Supply & delivery at store of Harizantal type Openwell Submersible pumping machinery as per follwing specification:- Pump: Discharge : 30m3/hr , Head : 60 Mtr, Impeller : CI ,Motor Body : Cast Iron, Delivery: 65/80mm, Casing : Cast Iron, Shaft : Stainless Steel, Motor: Methode of Starting : SD , Supply Voltage : 3 Phase , 415 V( ±10%) , 50Hz(±5%), (Curve chart will be submitted before the delivery).(Make: Kirlosker/KSB/Approved make of P.H.E.Dte.)

1.1KV grade 4 sq.mm x 3 core water proof flat submersible copper cable for above pump-motor set.

32 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure (Conforms: IS/IEC600947-1&3).

63 Amps, 6way, wall mounted Copper Busbar Chamber with steel sheet enclosure (Conforms:IS/IEC:60947-3).

Supply and delivery of the following valves, pipes and gauges etc at site--

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for delivery pipe line and wash out line.(MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312).(MOC & TC needed for valve).

Supply, delivery at site and storage of MS dismantling joint suitable for PN 1.0 rating for the following sizes for Individual Delivery of High Lift Clear Water Pump sets. Nominal dia-80 mm

Supply, delivery of Medium B class GI Pipes of DN 80( conforming to IS 1239 part-I 2004) and supplied dismantling joint for delivery and common header lines on delivery side (suitable for PN 1.0 rating )including necessary Flanges, Bends, Tees, nuts and bolts gaskets, reducers,enlarger etc. as required to make the delivery line complete for the two number mono block pump.

150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials].

Fitting & fixing of starter along with main switch, busbar etc. all electrical equipment within the pump house, drawing of cable properly on suitable size GI cable tray on wall / as per direction of EIC as per layout & IE rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials as per direction of EIC & testing complete.

Supply & Making necessary GI Medium pipe (dia of pipe not less than 32mm) protection for submersible cable from kiox box to submersible pump-motor set including supply of all specials and complete the job.

Installation of of above supplied openwell pumping machinery ,main switch,busbar, changeover,satrter at along with above supplied GI column pipes (as required),dismantling joint top cover, valves, and specials ,cable protection pipe and clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near CWR . including cutting hole on top of CWR and PCC base for pumps and supply & laying of cable protection pipe as required and all to complete the job including painting of whole installation as per direction of EIC. [N.B: (1) Pump data is to be confirmed with the yeild test report of the tube well. (2) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (3) Drawing, design and make of the materials are to be approved from the EIC before procurement.]

Add: GST @ 18% on sum of Item No: 1.00 to 5.00

Add: Cess @1% on sum of Item No. 1.00 to 6.00

RMD TRADING (BID ID -6441564)

R.N.S.TRADING (BID ID -6440935)