PROVISION OF GUARD ROOM WITH TOILET FACILITY ADDN ALTN TO MAIN GATE ON 5 ACRES CG LAND AND PROVN OF BOUNDARY WALL WITH GATE AT 3 ACRE LAND AT BHUBANESWAR

Amount

GUARD ROOM Excavation in trenches in hard/dense soil & getting out in n.exc. 1.5 Sqm wide & 1.5m in depth for foundation, etc, or for shaft, wells, cesspits, manholes, pier holes etc. n.exc 10 Sqm on plan and not exceeding 1.5 m in depth complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming, in trenches with excavated soil in layers n.exc.25cm thick complete all as specified and directed.

Removing excavated surplus soil n.exc. 50m & depositing where directed at level n.exc. 1.5m above the starting point complete all as specified and directed.

M&L plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation ,filling and mass concrete etc complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L plain cement concrete (1:3:6) type C-2(using 40 mm graded stone aggregated), 75 mm thick as in plinth protection complete all as specified and directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for Providing precast ce- ment concrete type B1 1:2:4(20 mm graded aggregate) in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma?sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham?fers, weatherings, throat- ing etc. and setting in mortar 1:4 complete with joints to match

M&L brick work with fly ash bricks,straight or curve on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 as in half brick wall complete all as specified and directed.

M&L RCC M30 grade (Design mix) type B1 using 20mm graded stone aggregate as in roof beam, floor beam , lintel band & chajja complete all as specified and directed.

M&L RCC M30 grade (Design mix) type B1 using 20mm graded stone aggregate as in roof slab complete all as specified and directed.

M&L RCC M30 grade (Design mix) (with 20 mm graded stone aggregate) as in foundation, footing, tie beam, plinth beam etc complete all as specified and directed.

M & L RCC M30 grade (Design mix) (with 20 mm graded stone aggregate) as in column complete all as specified and directed.

Form work to sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter rough finished surfaces of concrete square/rectangular/polycon surface complete all as specified and directed.

Formwork of sides of pillers, struts, piers, column surface of concrete etc of Rough finished square, rectangular or polygonal surface complete all as specified and directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, not exceeding 200 mm thick (Horizontal or sloping) of flat surfaces of rough finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floor & beams etc including rought, flat finished surfaces complete all as specified and directed.

M&L, 10mm dia and above TMT bar cut to length bent to shape reqd, incl cranking bending spirally for hooping for column, hooking end etc complete & binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No 19 hereinbefore but TMT bar 5mm dia and including 10 mm dia as in stirrups, spacers and binder complete all as specified and directed.

M & L rendering 5mm thick on concrete ceiling surfaces in cement mortar 1:3 finished surfaces fair and even complete all as specified and directed.

M & L rendering 10mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:6 finished surfaces fair and even complete all as specified and directed.

M & L rendering 15mm thick on fair faces of brick or concrete wall surfaces in cement mortar 1:4 finished surfaces fair & even using WPC (Water Proofing Compound) as per manufacturers instructions complete all as specified and directed. Note : WPC measured and paid separetly.

Supply only Integral waterproofing compound complete all as specified and directed.

M&L three coats of white wash to newly plastered surface of ceiling incl preparation of surfaces complete all as specified and directed.

M&L preparation of plastered surface of wall and applying two coat of oil emulsion distemper over a coat of alkalic resistant priming paint complete all as specified and directed.

M&L three coats of white wash on Internal new plastered surface including preparation of new surface complete all as specified and directed.

Material & Labour for Preparing new plastered or unplastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. premium quality, Gr-1 set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layers in cement mortar (1:4) complete all as specified and directed.

M&L colour glazed ceramic coloured tiles 300mmx200mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match with and including 10 mm thick screed bed or bedding layers in cement mortar (1:3) complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern and pipe) complete all as specified and directed.

S&F PVC valveless, syphonic action type low level flushing cistern, white, 10 ltrs capacity, including all fittings and flush pipe, PVC connection pipe, inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F over head shower 140mm dia round shape sigle flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system with nessary extesion pipe from wall complete all as specified and directed. (Make : Jaquar prduct Code No OHS-1757 or similar in make as mentioned in list of makes of PS).

S&F vitreous china wash basin, white, flat back, size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc with CP waste coupling of 32mm bore, PVC waste pipe of 32 mm dia cast iron bracket & 15 mm bore PVC connector pipe of 450mm long complete all as specified and directed. (Note : Waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets & PVC connector pipe etc shall be deemed to be included in the quoted rate)

S&F chromium plated Bib taps 15mm bore cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valves 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

S&F stop valves(concealed) 15 mm bore cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

S&F soap dish,vitreous china white ,approximate size 160x160x90 mm fixed with CP screw complete all as specified and directed.

S & F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

S&F 15mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

M&L 100mm dia outlet of Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed

S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed

S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed

S&F 110mm bore PVC (SWR) junction single Tee equal or unequal complete all as specified and directed

S & F 500 litres capacity rotational moulded polyethylene water storage tanks with lids (multi layer minimum 3 layered) (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm bore medium grade, galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

S&F 15 mm bore medium grade galvanised iron with all fitting and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring pipe where making good to facing required and pointing in cement mortar 1:3 etc. in Brick wand and concrete. Walls & cutting not exceeding 10 cm girth complete all as specified and directed.

S&F 15 mm bore gun metal ,globe or gate valve,with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

Cutting 150mm dia pipe into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

S&F 110mm bore PVC(SWR) vent cowl complete all as specified and directed.

M&L applying water proofing treatment with the following complete all as specified & directed :- (a) First coat of hot blown bitumen with bitumen 85/25 grade @1.20 Kg/Sqm over bitumen primer @0.3 litre/Sqm. (b) Second layer of APP based polymeric membrane minimum weight 3.5 Kg/Sqm and minimum 3.0mm thick reinforced with polyster non woven fabric (wt not less than 160 gms/Sqm) laid on primed surface by torched application. (c) Third layer i.e. a coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm shall be applied over water proofing membrane and (d) Finally finished with a coat of bituminous aluminium paint @ 0.10 Kg/Sqm.

M&L rendering 10mm thick cement mortar 1:4 on concrete surfaces as in roof treatment using WPC @3% by weight even & smooth without using extra cement complete all as specified and directed. (NOTE: WPC measured and paid separately)

S&F PVC connection pipe 15mm size & 450mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as specified and directed.

M&L powdered coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.

M&L powered coated anodised aluminium door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc for fixing glass panes/particle board in frame & including fixing of glass pane prelaminated particle board. complete all as specified and directed. (Note : (i) Glass Pane/Prelaminated particle board shall be measured & paid separately as supply only. (ii) Minimum thickness of powder coating 50 micron.)

M&L powered coated anodised aluminium sliding window and ventilator shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. for fixing glass panes in frames & including fixing of glass pane complete all as specified and directed. (Note : (i) Glass Pane shall be measured & paid separately as supply only. (ii) Minimum thickness of powder coating 50 micron.)

Supply only mortice lock, brass, 4 levers, vertical type, size 100 mm complete all as specified and directed.

Supply only 5.5 thick sheet glass, odinary quality in square n exc 0.5m in each pane complete all as specified and directed.

Supply only 5.5 thick sheet glass, odinary quality in square exc 0.5m in each pane complete all as specified and directed.

Supply only 12 mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, complete all as specified and directed.

S&F aluminium (extruded section body)Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with mild steel square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

S&F aluminium handle 150 mm long extruded section complete all as specified and directed.

S&F aluminium barrel tower bolt, 150 mm long, extruded section complete all as specified and directed.

S&F cold rolled mild steel butt hinges 100 mm long, medium weight complete all as specified and directed.

S&F 18 to 20 mm thick granite slab, machine cut, laid over screed bed, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including cutting and polishing types with and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L Hardcore of gauge n exc 63 mm of brocken stone or boulders deposited. Spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for 100 mm thick plain cement concrete type D2 (1:4:8) 40mm graded stone aggregate floor sub base all as specified and directed.

M&L for 25 mm thick plain cement concrete type B0 (1:2:4) 12.5mm graded stone aggregate floor finishess with using extra cement all as specified and directed.

M & L for Screed bed or bedding layer of cement mortar in 1:6, 15 mm thick for laying floor finishes all as Specified and directed by Engineer In Charge.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over ceme nt screed base laid and jointed with grey cememnt slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

ADDN/ALTN TO COMPOUND WALL & GATE Demolition RCC of any description and any position not otherwise specifically provided

Dismantling Structural steel work including, doors, gate but excluding framed truss etc

Demolition PCC in Ground Floors and pavings n exc 15 cm thickness (below or above ground level

Excavation in trenches, exc 1.5 n.exc 3.0 m deep and getting out in Hard/dense soil complete all as specified.

Removing excavated material n exc 250 m but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point

Removing building materials etc. to a distance of 300m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination

M & L for demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified & directed.

Complete removal of existing white wash old surfaces , plastered or unplastered complete all as specified and directed .

Material & Labour for Preparing old plastered or unplastered surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F of plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment( confirming to Fe-410-W(Gde-E-250) quality-A)

S&F mild steel bolts of dia exe 12 mm n.exe 20 mm purpose made.with hexagonal or square head one end and screwed the other, or screwed both ends;each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long.

M&L for providing cement concrete for fixing of hold fast rounded or chamfered on edges Type B1 1:2:4 (20 mmgraded stone aggregate) all as specified and directed.

M&L for 100mm thick sub base PCC type B2 1:2:4 using 20 mm graded stone aggregate as in floor finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

S&F of SS letter size of width of each letter 20 cm width,30 cm height 2 mm thick fixed on wall/ wall cladding.

M&L for preparing surface of steel and iron work of new surfaces and of any description over 10 CM width or girth ,not other wise describe and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down cement plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Supply and fixing 4 mm thick (0.50mm AL + 3.0mm LDPE + 0.50mm AL. PVDF coating) Exterior quality Aluminium composite Panel (ACP) wall cladding on existing AI /MS Frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP Panel (Engraving the rear surface of ACP Sheet) with CP Angle, Cleats and stainless steel screws froming groves at the periphery of ACP panel as per manufacturers instrucitons. Such grooves filled with foam and sililcon sealant etc. complete with all materials including the cost of silicon sealant , Labour , scaffolding and all other incidental charges complete in all respect as per specificaiton and directions. (Note - Mode of Payment is on finished surface area of ACP.)

BOUNDARY WALL WITH GATE M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface to receved the wall tile complete all as specified and directed.

S & F for Pre cast cement Concrete Type B0 1:2:4 (12.5mm graded aggregate) louvers and jallies, 35 mm thick (measured solid , of any design as approved by Engineer-in Charge Complete all as specified and directed

Reinforced cement concrete (nominal mix) Type B0 1:2:4 (20mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 with using liquid WPC at the rate of 200ml per bag (50 kg) of cement and using necessary formwork complete all as specified and directed. (Note- Integral water proofing compound shall be measured and paid saperatly)

SEWAGE DISPOSAL Concrete bed to drain pipes of size 150 mm bore packingunder and haunching against the sides of pipes after theyare laid and fitted in cement concrete, Type C2, 1:3:6,using 40mm graded stone aggregate complete all asspecified and as directed.

PCC 1:2:4, Type B–0, using 12.5 mm graded stone aggregate as in coping including use and waste of formwork and finishing the exposed faces of concrete evenand smooth without using extra cement complete all asspecified and as directed.

PCC 1:2:4 type B2 (using 40mm graded stone aggregateas in surface channels/benching and drains complete allas specified and directed.

Reinforcement using High Strength Corrosion ResistantDeformed TMT Bars of Grade Fe–500D of 5mm dia andover up to 10mm dia, required in stirrups, spacers &binders, cut to length, bent to shape required, bindingwith & including mild steel wire (annealed) not less than0.9mm dia or securing with clips quality complete all asspecified.

Reinforced concrete pipes, class NP2, 150 mm dia laid in trenches and jointed complete with collars complete all as specified and directed.

150mm dia Salt-glazed stoneware drain pipes, class A, laid in trenches and jointed complete all as specified and directed.

Cutting into existing manholes for connecting new drains of Internal dia of pipe in 150 mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

SITE CLEARANCE Surface dressing n exc 15 cm deep and getting out in Soft/loose soil all as specified.

Spreding, Levelling in layer not exc 25 Cm thick including well ramming with watering as required for excavated earth received from footing/Foundation.

SPECIAL ITEM Material & Labour for providing and fixing stainless steel (Grade 304) Gate/railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

M & L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed

INTERNAL ELECTRIFICATION Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

(a) One light point & Fan point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 113 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 2 module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

Supply & fix LED tube light 20 W Fitting Smart Bright extruded aluminium batten available in 4 ft run length with Lumen efficacy 125 lm/watt and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Crompton No. CCS-100-2--65-HL2-DP-NWH (4 ft) Eqv Crompton/ Havells/ PHILIPS

Supply & fix LED Spike light 25 W Fitting Environmental friendly, new generation, energy saving, decorative IP66 LED spike light using COB LED as light source including fixing at location such that spot on the letters in main gate suitable mounting with accessories complete all as specified and directed. Make Havells part No. LYCUSSPS25WLED730PSYMBOTG or Eqv Crompton/ Havells/ PHILIPS

Supply & fix LED Spike light 15 W Fitting Environmental friendly, new generation, energy saving, decorative IP 66 LED UP-down Luminaire with wall surface mounting using COB LED as light source to be fixed in main gate wall suitable mounting with accessories complete all as specified and directed. Make Havells part No. CLIOLL15WLED730PSYMTOTUG or Eqv Crompton/ Havells/ PHILIPS

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified.(Make : L&T/Legrend/Havells

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : L&T/Legrend/Havells

Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. (Make of GI Pipe - Jindal/Prakash/Tata)

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make :L&T/Legrend/Havells

Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Complete all as specified and directed Make: Havells/ Usha/Crompton/orient

Supply and fixing wal mounted fans Sweep (mm) : 400 Air delivery : 5700 M3/Hr RPM : 200 Oscillation & speed control by pull cord mechanism , Specially designed motor gives high air thrust @ 2000 RPM complete accessories Complete all as specified and directed Make: Havells/ Usha/Crompton/ orient

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 2.5 sqmm (Nominal area) FRLS PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 2.5 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fixing Building security light fitting,new compact designed IP 66, Aluminium PDC housing with toughen glass cover high power LED street light/Building Security light of capacity 10 watt.including provn of necessary connection complete.(Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equivalent make of Phillips/Havells/ Bajaj/Wipro)

EXTERNAL WATER SUPPLY Supply and Laying GI pipe medium grade with fittings laid in trench all as specified and directed of the 25 mm bore of pipe

Supply and Fix Gun-metal, gate valves, of size 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

M & L drilling and tapping cast/galvanised iron water mains (in position) for branch connections of the internal dia 25 mm complete all as specified and directed

M&L Rotational moulded polye thylene water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified and directed.

EXTERNAL ELECTRIFICATION Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

M & L for cutting the existing concrete/bituminious road surface width n.exe 30 cm and making good the surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone sggregate over consolidated/rammed earth surface all as specified and directed

M&L GI pipe light grade with all fitting laid in trenches and under road/floor/culverts along with pole etc 50mm bore. Make : Tata/Jindal/Surya

Supply and Fix MCB 415 Volt 16 KA 4 Pole, 63 Amps in existing panel as outgoing complete all as specified and directed.

Supply & Fixing cable junction box made of thermoplastic, halogen free, weather proof with metric Knock outs for cable entry including four/five pole terminals and cable entry glands for incomming, out going and connection cable with protection grade IP-66/67 of size104x104x70 mm of make hensel cat part no-KF 0404 g or equivalent suitable for LT under ground cable any size/capacity including bracing clamp,bolts,nuts & washers.

Supply , fixing and testing of post of lantern LED light fitting of 25 watt designed with symmetrical light distribution , spun aluminium landscape luminare with high power LEDs as light source complet fixed on gate /GI pipe of 50 mm dia complete with necessary fixing arrangement all as specified and directed.

RANA ENTERPRISES

M/S.J.BIJAYA KUMAR PATRO

M/s- U. TECH SERVICE