PROVISION OF PCC FLOORING IN LIEU OF WOODEN IN MD ACCN OF A 101 TO A 108 OF ARC HAPPY VALLEY SHILLONG

Amount

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for providing Hardcore of gauge n exc. 63 mm size broken stone or boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 ( Using 40mm graded agg) as in foundation and mass concrete complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendering in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall complete all as specified and directed.

M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finished fair and even including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 300 mm X 200 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 10mm thick rendering in CM (1:4) on fair faces of brick or concrete surfaces finished fair and even on vertical surfaces of wall including roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

S&F 2nd class Hardwood boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding any description fixed in any position with nails complete all as specified and as directed

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed

Taking down shutter of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc 2.00 sqm each complete all as specified and directed.

Supply and fixing 2nd class HW plain solid straight chowkhats/frame wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 30mm thick 2ndclass HW Glazed and skeleton windows, ventilators, etc are provided with stiles and rails as specified in SSR Part I section 8 clause 8.24 (b) all specified and directed.

Supply and fixing 2nd class HW 35mm thick plain framed panelled shutters (any number of panels), with panel of timber flats on both sides or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes all around . M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.

Supply and fixing 200mm size MS barrel tower bolt stone enamelled black with bright bolt ISI marked complete all as specified and directed.

Supply and fixing 150mm size MS pressed handle oval type stove enameled block complete all as specified and directed.

S&F 100 mm size MS barrel tower bolt stone enamelled black with bright bolt complete all as specified and directed.

S&F 100 mm size MS pressed handle oval type stove enameled block complete all as specified and directed

S&F 75 mm size butt hinges cold rolled medium weight for windows/ventilators complete all as specified and directed.

S&F 100 mm size butt hinges cold rolled medium weight for door shutters complete all as specified and directed.

M&L for preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M &L for Pre-cast cement concrete block masonry type C1 (1:3 :6) 20mm garded stone aggregate with solid blocks etc 10cm in width and setting in cement mortar 1:6, compete all as specifed and as directed

M&L for rendering 15mm thick plaster in cm ( 1:4) on fair faces of brick work or concrete surfaces including finishing even & smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of white or tinned with cement base paint over priming coat on exterior wall complete all as specifed and directed by Engr-in-Charge

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces and finishing even & smooth without using extra cement including taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site.

M & L for preparation of new plastered/concrete surfaces of walls, providing one more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified.

M&L for 25 mm thick PCC 1:2:4 type B-0 ( 12.50 mm) graded aggregate) as in levelling curse of tile flooring etc. Complete all as specified and as directed.

M/S Nakul Chandra Samal

M/S U.K ENTERPRISE

M/S MANOJ KUMAR BAL

S K DEY

Ms Amrik Singh Bahra