Nadarganj Industrial Area Hote Huve Amausi Overbridge Tak Marg Prakash Vyavastha avam 05 Varsho ke Varshik Anurakshan avam Sanchalan ka Karya.

Part-(A)

G.I OCTAGONAL POLE Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100 mm, Bottom dia 200 mm and base plate 16mm thick) having 3 mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of fo

STREET LIGHT LUMINAIRES Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects, CAT- AAA

Wiring of Submains with Aluminium cable using existing steel conduit, S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by Engineer In Charge.

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect., 40 A TPN

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 16 sq. mm 4 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 50 sq. mm 3-1/2 core

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 70 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 16 sq. mm

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 50 sq. mm

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 70 sq. mm

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 10 sq. mm

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve, CAT A

S/B of earth rod 20 mm dia 2.5 mt long including GI wire 7/16 SWG to connected earth rod and earth clamp on pole,3 mt long steel conduit to carry earth wire along the pole complite as per approved of E/Ic.

Supply and fixing of DWC HDPE Pipe along with all accessories like socket, band, coupling etc. confirming to IS 14903 PartII complete with fixing and cutting jointing etc. (63mm OD and ID51 mm nominal) DSR/2022(E/M) No 14.161)

"Supply, Installation, testing & commissioning of Servo Stabilizer with Isolation transformer 65KVA, 3-phase servo voltage stabilizer with isolation transformer , oil cooled, Input 300-470 VAC, 4 Wire, 50 Hz, output: 400+/-1% with oil, suitable for UNBALANCED LOAD with automatic operation (outdoor type-IP 64). The stabilizer shall comply with the following requirement: : Regulation : +/- 10 %. : Over load & Short circuit protection. : Protection cut-off against Over/Under Voltage. : Single phase protection. : 3 nos. phase indication lamps.

HIGH MAST SHAFT Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind ve

FLOOD LIGHT LUMINAIRES Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect., CAT- AAA

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc., 25 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge., 25 sq. mm

ENCAPSULATED PIPE - IN- PIPE EARTHING Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

High Tension 11 KV Grade XLPE, Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required.

Supply and fixing of Designing bracket Actual cast of decorative double arm bracket proper completion size (1200 x 1200 x 1500 ) mm MS pipe with hot dip two coat painting and decorative S.S. ball complete all respect with nut bolts. Rate are also dedect for single arms bracket @ 2100.00 per bracket .

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

SF of double pole structure with 2 nos ST pole for SS 410 SP-54 11 Mtr long in 136 CC foundation 1/6 of pole length below GI and 30cm above G.1 20cm thick around the pole with 2 nos channel 125mmx75 mm one No Chennel cross arm of 75mmX 40mm 2 No 50X50X6mm single iron bracings with necessary nut bolts & packing pieces complete with painting as per direction of El PSR Bond No 87/CE/EE(E/M) 2021, Dated 09-11-2021.

SF of 11 KV Pin insulator with GI Bolt/spindle nut etc complete on all respects.

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

"S/E of 11 K.V L.A. set of 3 wire. suitable for mounting on steel support complete in all respect as per direction of E/I. PSR Bond No.87/CE/EE(E/M)/2021, Dated 09-11-2021 "

S\E of 11 KV TPMO switches on poles including handle rod etc. complete in all respects as approved by E\I. (Previous Sanction Rate) (PS Rate)

S\E of 11 KV D.O. fuse set on poles complete in all respects as per approval of E\I.

S/F of 70 Sq.mm size 3 core XLPE 11 KV outdoor type jointing kit proper completion of work as per direction of E/I A.R. Make: Raycheme, Mahindra. PSR Bond No.02/CE/EE(E/M)/2022, Dated 19.04.2022)

"S/F of level 2 following capacity 11/0.433 K.V. Al’ wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, having losses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make UPPCL/KESCO Approved (PSR Bond No.02/CE/EE(E/M)/ 2022, Dated 14.09.2022) (a) 63 KVA (A.R.)"

Supply and Eraction of Pipe Boring earthing Proper complition of work as for direction of E/I (Shedule - 53) (Analysised on Lesa Cost Data Book/Lesa Estimate )

"S/E of 2.24 mtr. Long cross arm 50mmx 50mm. channel on pole including clamps, eye bolts etc. with red enamel paint as per direction of E/Ich. (Analysed as per SOR- 2020 civil) "

Supply and Laying of 80 mm dia G.I. pipe for the purpose of cable on the run pole through this G.1. pipe from level as cable carrier pipe should be tied with 2Nos. 50x6mm flat iron clamp with pole as per direction of E/I as per Builders Friend April 2007

High Tension 11 KV Grade XLPE, Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc., 70 sq. mm 3 core

Part-(B)

Operation of Part A 1st year (2.5%) of Estimated Value 17292558.00

Operation & Maintenance of Part A 2nd year (5 %) of Estimated Value 17292558.00

Operation & Maintenance of Part A 3rd year (7.5 %) of Estimated Value 17292558.00

Operation & Maintenance of Part A 4th year (9 %) of Estimated Value 17292558.00

Operation & Maintenance of Part A 5th year (11.5 %) of Estimated Value 17292558.00