Renovation of Sub-Division office building at Madikeri.

Renovation of Sub-Division office building at Madikeri.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Of area 3 m² and below.(P.No 188/I...

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall includin...

Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approve...

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary Complete. 25 mm diameter.(P.No 199/I.No. 20.2...

Providing & fixing 100% Polyester Curtains with specification of regular wash as per direction of Engineer in charge (P-219,I-22.24,Vol-2)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (bo...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ...

Renewing glass panes, with putty and nails wherever necessary

including racking out the old putty: (P.No.197, I.No. 20.2.2 of PWD SR 2023-24 Vol 2)

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), includi...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove...

Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound) content less than 50 g/L, of approved brand and manufacture, including applying additional coats wherever required, to ...

Finishing walls with Premium Acrylic Smooth exterior paint withSilicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work ...

Finishing walls with textured exterior paint of required shade :New work(Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even s...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap-proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and j...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of ap-proved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and j...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...

Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of ...

Providing and supplying aluminium extruded tubular and other aluminiumsections as per the architectural drawings and approved drawingsof Chief Architect, GoK.The aluminium quality shall be as per grad...

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...

WATERSUPPLYWORKS:Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass thre...

Providing and fixing brass bib cock of approved quality :(P-117,I-13.2.2,Vol-2)

KSRB 11-17.2 : Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per s...

KSRB 11-11.3 : Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard...

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (P-133,I-14.8,Vol-2)

KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low ...

KSRB 11-7.1 : Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C.I / M.S brackets, standard flush pi...

Proviidng and fixing SS Health faucet(MR)

Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines...

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal ...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Electrificarion works: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC ...

Medium point above 3mts up to 6mts from tapping point to out let via switch(P-05,I-2.1.2 Vol-6)

Long point above 6mts from tapping point to out let via switch(P-05,I-2.2.3 Vol-6)

Wiring for lighting /power circuit using one of PVC insulated 1100v grade multistrand copper conductor single core cable in open or concealed systeem of wiring (a) group A- (1.5 Sqmm)(P-5,I-2.3.2,Vol-...

group A- (2.5 Sqmm)(P-5,I-2.3.3,Vol-6)

group A- (4 Sqmm)(P-5,I-2.3.4,Vol-6)

group A- (1 Sqmm)(P-5,I-2.3.1,Vol-6)

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

4-5Way(P-8,I-3.4.3,Vol-6)

6Way (P-8,I-3.4.4,Vol-6)

8Way (P-8,I-3.4.5,Vol-6)

18Way(P-8,I-3.4.8,Vol-6)

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

4 Module(P-8,I-3.5.3,Vol-6)

6 Module(P-8,I-3.5.4,Vol-6)

8 Module(P-8,I-3.5.5,Vol-6)

10 -12 Module(P-8,I-3.5.6,Vol-6)

18 Module(P-8,I-3.5.8,Vol-6)

Supplying and fixing of 6A One Way Switch (P-9,I-3.6.1,Vol-6)

Stepped Fan Regulator Two Module (P-9,I-3.6.4,Vol-6)

6/16A Universal Socket (P-9,I-3.6.10,Vol-6)

Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction boxI(P-2,I-1.5.1,Vol-6)

25mm deep junction boxI-(P-3,I-1.5.2,Vol-6)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

Supplying and fixing Metal Fan Box with round hook (P-4,I-1.13,Vol-6)

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

Supplying and fixing of Bakelite DP/Socket/Switches with /without neon indicator over existing wood board or flush mounting in plastic/ nitches 32 Amps flush projected type DP switch (P-9,I-3.6.9,Vol-...

Supplying and fixing of LED Streetlight luminaire with pressure die cast aluminium housing body for

Supplying and Fixing........mm dia class A GI pipe bracket Using 40mm dia G.I.Pipe (P-56,I-13.2.3,Vol-6)

Providing and fixing including wiring LED modular down light 2'x2' 36 W (P-45,I-11.6.3,Vol-6)

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twiste PVC insulated wir...

Supplying and fixing of of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) (P-30,I-6.2.1,Vol-6)

Supplying and drawing UTP-CAT 6E LAN cable. .(P-36,I-8.1,Vol-6)

Supplying & Fixing of ... ms Cat 6 Patch Cable 3m (P-37,I-8.11.3,Vol-6)

Supplying fixing of Network Switches. 16 port 10/100/1000 Switch(P-36,I-8.9.11,Vol-6)

Supplying & Fixing of Patch panel for Lan cabling 16 Port 10/100/1000 patch panel(P-37,I-8.12.6,Vol-6)