REPAIR TO AC/CGI SHEETS ROOF, EVES BOARD FALSE CEILING AND OTHER CONNEECTED WORKS IN DOMESTIC AREA AT AIR FORCE STATION PATHANKOT

Amount

Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of existing brick work complete all as specified and directed by Engineer-in-Charge

All as above item No 01 above, but except bricks complete all as specified and directed by Engineer-in-Charge

Rendering 15 mm thick cement plaster in cement mortar 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge Note : Rate for form work if requd to be included in the rate quoted by the contractor

Preparation of newly plastered surfaces and applying two coats of acrylic exterior emulsion paint as approved of any shade/colour in over a coat of primer of surfaces as per manufacture instructions complete all as specified and directed by Engineer-in-Charge

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster complete all as specified and directed by Engineer-in-Charge

Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge

Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coats of oil bound distemper on old surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment on surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot , moulds moss and efflorosent salts , trading oil and greasy spots and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls preparatory to distempering complete all as specified and directed by Engineer-in-Charge

Preparation of surfaces and applying 3mm thick wall care putty on wall surfaces etc complete all as specified and directed by Engineer-in-Char

Rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including applying two coats of weather proof emultion paint incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed by Engineer-in-Charge. Note :Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge

Preparation of old painted steel surfaces of any description and in any situation over 10 cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge.

PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in cills, steps,plinth courses, coping etc, complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed by Engineer-in-Charge

Dismantling asbestos cement (corrugated, semi-corrugated etc sheets in roof covering complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge

Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth, 75 mm thick and finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation board/slab/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge

Position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm x 3600 mm, cross tee 25 x 24 x 600mm / 25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm ( thickness of the material of 0.30 mm), using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips complete all as specified.and directed by Engineer-in-Charge

Excavation in post holes (or similar holes) each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface in any type of soil complete all as specified and directed by Engineer-in-Charge

Supply and fixing of rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to commen rafters and running rails fixed with angle cleat or other connecting plates complete all as specified and directed by Engineer-in-Charge

Supply and fixing of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge

Supply and fixing of ramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings xclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engineer-in-Charge

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified.and directed by Engineer-in-Charge

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverings/cladding to wall,fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L- type or J- type or cranked hook including dismantling existing sheets complete all as specified and directed by Engineer-in-Charge.

All as per item no 26 above but Refixing old asbestos cement, corrugated or semi corrugated sheets in roof, walls etc fixed with L- type or J- type or cranked hook complete all as specified and directed by Engineer-in-Charge.

M&L for Asbestos cement two piece adjustable plain wing ridge 6 mm thick fixed with L- type or J- type or cranked hook complete all as specified and directed by Engineer-in-Charge.

Preparation of new or previously untreated steel surfaces of any description over 10 Cm width and girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Machine pressed coloured cement concrete interlocking 60 mm thick paver block any shape and sizs as directed, confirming to IS 15658-2006, M-35 Grade as in floor etc. set and jointed with gray cement and no pigment including dismantling existing tiles complete all as specified and directed by Engineer-in-Charge.

Dismantling old factory made precast cement concrete interlocking tiles of any thickness and size and refixing in the same position in true level complete all as specified and directed by Engineer-in-Charge.

Designer coloured paver tiles of size 300 x 300 x 25 mm thick or equivalent size as in machine pressed set, jointed in neat cement slurry over and including sereed bed 20 mm thick in cement mortar (1:6) complete incl dismantling existing tiles complete all as specified and directed by Engineer-in-Charge

Filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc exc 25 but n exc 50 Sq cm complete all as specified and directed by Engineer-in-Charge.

M/S MULTI ENGINEERS

new hi tech engineers and contractors